John Deere 40 Series, Classic 2040S Front Axle & Steering PARTS
Our range of steering and axle parts for John Deere 2040S tractors will get you heading in the right direction. Robust original quality steering joints and track rod ends are stocked along with kingpins, spindles, wheel bearings, axle seals, bushes, bearings, wheel hubs, repair kits, wheel nuts, power steering pumps, orbital units, hoses, steering boxes, seal kits, drive shafts, wheels and tyres.
Tie Rod & Steering Joint 4WD
-
Track Rod End - AL32866 suitable for John Deere tractor Track Rod EndSuitable for John DeereIn stockPart No.76774
Wheel Rims
-
Wheel Rim 4.50 x 16 suitable for John Deere tractorSuitable For Use With Tyre Size:- 6.00 X 16Agriline Recommend Using Their Tyre Reference T-002 Which Is A 6.00 X 16 Tyre, With This Rim.Agriline wheels are manufactured to a high degree of accur... Show More£34.80 Inc VAT £29.00 Exc VATIn stockPart No.2162Tyres
-
Tyre 6.00 - 16 (3 Rib) suitable for John Deere tractorT-002 is an 8 ply, 3 rib pattern front tyre; widely found on many vintage and classic 2WD farm tractors such as John Deere, David Brown, Ferguson, Fordson, Massey Ferguson, Ford, and Case International.Fits rim size 4.50... Show More£57.00 Inc VAT £47.50 Exc VATIn stockPart No.T-002
Tyre 7.50 - 16 (3 Rib) suitable for John Deere tractor Front 2WD tyre. Brand: ATF. 8 Ply.
Use With 2240 Rim And T-007 Inner Tube£71.99 Inc VAT £59.99 Exc VATOut of stockPart No.T-003Inner Tubes
-
Inner Tube- Front 6.00 x 16 suitable for John Deere tractor Use with T-002 Tyre.
Use With 2162 Rim And T-006 Tyre
£11.99 Inc VAT £9.99 Exc VATIn stockPart No.T-006 -
Inner Tube- Front 7.50 x 16 suitable for John Deere tractor Use with T-003 Tyre.£15.00 Inc VAT £12.50 Exc VATIn stockPart No.T-007
Wheel & Tyre Assemblies
-
Wheel & Tyre Assembly 5.50 x 16 (7.50 x 16 Goodyear Tyre) suitable for John Deere tractor Contains: Wheel Rim (5.50 x 16) x 1 Tyre - Front Goodyear (7.50 x 16) x 1 Inner Tube (7.50 x16) x 1 Supplied fully assembled - finished in undercoat£210.00 Inc VAT £175.00 Exc VATOut of stockPart No.22010 -
Wheel Rim 5.50 x 16 suitable for John Deere tractorSuitable For Use With Tyre Size:- 7.50 X 16Agriline Recommend Using Their Tyre Reference T-003 Which Is A 7.50 X 16 Tyre, With This Rim.Agriline wheels are manufactured to a high degree of... Show More£34.80 Inc VAT £29.00 Exc VATIn stockPart No.2240
Wheel & Tyre Assembly 5.50 x 16 (7.50 x 16 Tyre) suitable for John Deere tractorAgriline will handle the hard work for you, saving you the time and effort of assembling your own wheels, or the expense and inconvenience of hiring a fitter. Our team of expert fitters build Agriline wheel assemblies in-house.Show More £106.80 Inc VAT £89.00 Exc VATOut of stockPart No.22002Track & Drag Ends
-
Track Rod End suitable for John Deere tractorTrack Rod End- Lock Nut Thread Length (A): 34mm- Taper Diameter (B - C): From 20mm – 20.2mm- Outer Thread Diameter (D): 22mm- Effective length (E): 332mmSuppl... Show More£33.60 Inc VAT £28.00 Exc VATOut of stockPart No.50516
Track Rod End suitable for John Deere tractorTrack Rod End- Lock Nut Thread Length (A): 26.6mm- Taper Diameter (B - C): From 16.2mm – 18.7mm- Outer Diameter (D): 36mm- Effective length (E): 148mm- Internal Thread Size ... Show More£42.00 Inc VAT £35.00 Exc VATIn stockPart No.50509
Track Rod End suitable for John Deere tractorTrack Rod End- Lock Nut Thread Length (A): 26.6mm- Taper Diameter (B - C): From 16.2mm – 18.7mm- Outer Thread Diameter (D): 20mm- Effective length (E): 370mmSupplied wit... Show More£34.80 Inc VAT £29.00 Exc VATIn stockPart No.50508
Steering Joint Lock Nut suitable for John Deere tractor For use with 50500 Steering Joint.
Thread: M18 x 1.5.
£2.10 Inc VAT £1.75 Exc VATIn stockPart No.80168
Track Rod End suitable for John Deere tractor Length: 305mm. Rod/Thread: M24 x 1.5mm Right Hand. Taper: 23.5mm, 26.4mm. Suitable for APL 345 Standard Duty Axle. John Deere. 2140 - Upto Serial Number 024905. 3040 - Upto Serial Number 026316. 3140 - Upto Serial Number 026316.£76.16 Inc VAT £63.47 Exc VATIn stockPart No.50501
Track Rod End LH/RH suitable for John Deere tractorTrack Rod End LH/RH- Lock Nut Thread Length (A): 27mm- Taper Diameter (B - C): From 20mm – 22.2mm- Outer Diameter (D): 28mm- Effective length (E): 284mm- Internal Thread Siz... Show More£46.80 Inc VAT £39.00 Exc VATOut of stockPart No.80307
Track Rod End - RH suitable for John Deere tractor Length: 305mm. Rod/Thread: M24 x 1.5mm Right Hand. Taper: 23.5mm, 26.4mm. Suitable for APL 345 Standard Duty Axle. John Deere. 2140 - Upto Serial Number 024905. 3040 - Upto Serial Number 026316. 3140 - Upto Serial Number 026316.£80.74 Inc VAT £67.28 Exc VATIn stockPart No.50502
Steering Joint - 1966125C1 suitable for John Deere tractor Steering Joint- Length (A): 175.5mm- Outer Thread Diameter(B): M18 x 1.5 RHT- Outer Thread Diameter (C): M20 x 1.5 RHTSupplied with Nut.£33.60 Inc VAT £28.00 Exc VATIn stockPart No.50500
Track Rod End suitable for John Deere tractorTRACK ROD END- Lock Nut Thread Length (A): 19mm- Taper Diameter (B - C): From 19.9mm – 22.3mm- Outer Thread Diameter (D): 24mm- Effective length (E): 95mm- Thread Size... Show More£25.20 Inc VAT £21.00 Exc VATIn stockPart No.50517Track Rods
-
Track Rod Assembly suitable for John Deere tractor Track Rod Assembly- Lock Nut Thread Length (A): 17.8mm- Taper Diameter (B - C): From 19.9mm – 22.3mm- Effective Length (D): 440mm- Outer Diameter (E): 30mmSupplied with Nut(s).Show More£91.20 Inc VAT £76.00 Exc VATIn stockPart No.50515
Track Rod Assembly suitable for John Deere tractorTrack Rod Assembly- Lock Nut Thread Length (A): 18.5mm- Taper Diameter (B - C): From 16.2mm – 18.7mm- Effective Length (D): 407mm- Outer Diameter (E): 28mmSupplied with Nut(s)... Show More£92.40 Inc VAT £77.00 Exc VATIn stockPart No.50507Axle Pivot Pins
-
Axle Pin suitable for John Deere tractor 40mm x 94mm£27.00 Inc VAT £22.50 Exc VATOut of stockPart No.74317
Axle Pivot Bush
-
John Deere Front Axle Bush - 4WD suitable for John Deere tractor OD: 31.5mm
ID: 19.74mm
Length: 89.2mm
£14.40 Inc VAT £12.00 Exc VATOut of stockPart No.74432 -
Front Axle Bush suitable for John Deere tractor OD: 45mmID: 40mmWidth: 38mmHole: 6.15mm£15.00 Inc VAT £12.50 Exc VATIn stockPart No.74998
Spindles
-
Spindle LH / RH suitable for John Deere tractor Shaft Length: 380mm.
Shaft Diameter: 38mm.£102.00 Inc VAT £85.00 Exc VATOut of stockPart No.74559 -
Spindle LH / RH suitable for John Deere tractor Shaft Length: 375mm.
Shaft Diameter: 44.5mm.£98.18 Inc VAT £81.82 Exc VATOut of stockPart No.74583
Spindle Repair Kits
-
Spindle Repair Kit suitable for John Deere tractor
For 38mm Spindles
£23.94 Inc VAT £19.95 Exc VATIn stockPart No.74225
Spindle Components
-
Bearing- 37.65 x 55.96 x 16.25mm suitable for John Deere tractor Bearing ID - 37.65 mm OD - 55.96 mm Width - 16.25 mm£6.18 Inc VAT £5.15 Exc VATIn stockPart No.52003 -
Hexagonal Nut - M12 - 14M7154 suitable for John Deere tractor Hexagonal Nut.Thread: 12mm (M12).Width: 19mm.Thread Pitch: 1.75mm.Thickness: 7mm.£1.03 Inc VAT £0.86 Exc VATOut of stockPart No.001-147154 -
Cotter Pin - 11M7030 suitable for John Deere tractor Cotter PinDimensionsDiameter: 5mmLength: 40mm£0.24 Inc VAT £0.20 Exc VATOut of stockPart No.001-117030
Steering Arm Components
-
John Deere Steering Arm Shaft suitable for John Deere tractor Pin For Top Arm£33.60 Inc VAT £28.00 Exc VATIn stockPart No.74446
Wheel Hubs
-
Wheel Hub with Studs suitable for John Deere tractor Requires Wheel Bearing Kit, Agriline Ref. 1540.
Wheel Bearing Hole Diameter, Axle End: 90mm.
Wheel Bearing Hole Diameter, Hub Cap End: 68mm.£56.40 Inc VAT £47.00 Exc VATIn stockPart No.1551A -
£178.80 Inc VAT £149.00 Exc VATIn stockPart No.74316 -
Axle Hub Housing LH suitable for John Deere tractor Axle Hub Housing LHDimensions- Overall Height: 220mm- ID: 115mm- Upper / Lower Thread ID: 48.7mm- Track rod taper ... Show More£178.80 Inc VAT £149.00 Exc VATIn stockPart No.74315
Wheel Bearings
-
Wheel Bearing Kit suitable for John Deere tractor
For Hubs With Bolt On Hub Cap
£23.99 Inc VAT £19.99 Exc VATOut of stockPart No.1540
Hub Caps
-
Hub Cap suitable for John Deere tractor Hub CapDimensions- 3 Bolt Fixing- Bolt Hole: 8.20mm- Distance between centres: 80mm- Grease nipple thread: 3/8UNF£17.99 Inc VAT £14.99 Exc VATIn stockPart No.74319
Hub Components
-
Hub Ring Gear - Fits Case, Ford & John Deere suitable for John Deere tractor 114 Teeth
APL 325, APL 325N
183mm x 207mm x 43mm
Currently unavailablePart No.74585 -
Hub Oil Seal suitable for John Deere tractor OD: 89.6mm.
ID: 60.16mm.
Width: 6mm.£4.20 Inc VAT £3.50 Exc VATOut of stockPart No.74562 -
Wheel Hub Gasket suitable for John Deere tractor
3 Bolt Fixing
£2.88 Inc VAT £2.40 Exc VATOut of stockPart No.74250 -
Wheel Hub Retainer suitable for John Deere tractor
OD - 90mm
ID - 80.8mm
£5.10 Inc VAT £4.25 Exc VATIn stockPart No.74249 -
Ring Gear suitable for John Deere tractor 4WD ZF Axle APL 325.
114 Teeth
183mm x 207mm x 43mm
£222.54 Inc VAT £185.45 Exc VATOut of stockPart No.74348 -
Annular Gear - L35599 suitable for John Deere tractor Annular gear.DimensionsOD - 188mmID - 161/170mmHeight - 46mmTeeth - 72£87.60 Inc VAT £73.00 Exc VATOut of stockPart No.76392
Steering Units
-
Orbital Steering Unit suitable for John Deere tractor Orbital Steering Unit£234.00 Inc VAT £195.00 Exc VATIn stockPart No.1548 -
Orbital Steering Unit - AL41631 suitable for John Deere tractor Orbital steering unit.Hole Spacing: 44mm.Hole Diameter: 28mm.Length: 135mm.Max Pressure: 20 bar.Number of teeth: 12.Top port thread size: M18 x 1.5.&nb... Show More£189.60 Inc VAT £158.00 Exc VATOut of stockPart No.76707
Steering Wheel Acc
-
Steering Wheel Woodruff Key suitable for John Deere tractor Steering Wheel Woodruff Key£1.20 Inc VAT £1.00 Exc VATIn stockPart No.5800
Power Steering Repair Kits
-
£19.80 Inc VAT £16.50 Exc VATIn stockPart No.6342
Power Steering Kits
-
Power Steering Cylinder suitable for John Deere tractor 2WD Models Without Cab.
The Brake system must be fully flushed with new clean fluid to remove any residual contaminants that may be left in the system.
Warranty shall not be accepted for damaged seals due to contamination.£714.00 Inc VAT £595.00 Exc VATIn stockPart No.6377
Power Steering Ram
-
Power Steering Cylinder suitable for John Deere tractor 2WD Models Without Cab.
The Brake system must be fully flushed with new clean fluid to remove any residual contaminants that may be left in the system.
Warranty shall not be accepted for damaged seals due to contamination.£714.00 Inc VAT £595.00 Exc VATIn stockPart No.6377
Power Steering Ram Repair Kits
-
£41.99 Inc VAT £34.99 Exc VATIn stockPart No.74220
4WD Driveshaft
-
Universal Joint- Driveshaft (27MM X 70.50MM) suitable for John Deere tractorUniversal JointShow More£22.50 Inc VAT £18.75 Exc VATOut of stockPart No.80075
Hub
-
Final Drive Shaft suitable for John Deere tractor ZF Axle: APL325. Splines: 18. Teeth: 18.£91.20 Inc VAT £76.00 Exc VATIn stockPart No.6172 -
4WD Planetary Gear suitable for John Deere tractor ZF Axle : APL325. 46 Teeth.£90.00 Inc VAT £75.00 Exc VATIn stockPart No.6165
4WD Axle
-
4WD Yoke Assembly suitable for John Deere tractor 4WD Yoke Assembly For APL325 Axle.Out of stockPart No.6521 -
Inner Axle Beam Seal AL32893 suitable for John Deere tractor APL1251 Axles.45mm x 28mm x 10mm.£7.37 Inc VAT £6.14 Exc VATIn stockPart No.75638 -
Core Plug - L39993 suitable for John Deere tractor Core plug suitable for John Deere and ZF APL 345 & 350 axles.£9.00 Inc VAT £7.50 Exc VATIn stockPart No.76793 -
Internal Snap Ring - 40M7115 suitable for John Deere tractorGenuine John Deere Snap RingDimensionsOD: 85.50mmID: 80mmWidth: 2.50mm£1.50 Inc VAT £1.25 Exc VATOut of stockPart No.001-407115
-
Hexagonal Nut - M16 - 14M7260 suitable for John Deere tractor Hexagonal Nut, M16 suitable for John Deere ApplicationsDimensionsThread Pitch: 2mmThickness: 8mmThread Size: 16mm£0.90 Inc VAT £0.75 Exc VATOut of stockPart No.001-107260
-