John Deere 40 Series, Classic 2040S Engine PARTS
We stock a wide range of high quality replacement tractor engine spare parts to suit John Deere 2040S tractors. All parts come with an 18 months warranty. Our range includes; cylinder heads, gaskets, valves, engines, blocks, pistons, liners, piston rings, Seals, engine overhaul Kits, fuel pumps, oil pumps, crankshafts, engine bearings, oil filters, fuel filters, fuel pipes, manifolds, silencers and much more.
Cylinder Head Gasket
-
Head Gasket Set suitable for John Deere tractor Head Gasket Set£29.99 Inc VAT £24.99 Exc VATIn stockPart No.1453 -
Head Gasket suitable for John Deere tractor Head Gasket£14.40 Inc VAT £12.00 Exc VATIn stockPart No.1475
Rocker Cover Gaskets
-
Rocker Cover Gasket suitable for John Deere tractor Use With Metal Rocker Cover.£5.04 Inc VAT £4.20 Exc VATIn stockPart No.1478
Cyl Head Ancillaries
-
Rocker Shaft suitable for John Deere tractor 3 CYL Tractors£17.10 Inc VAT £14.25 Exc VATIn stockPart No.74302
Valves Engine
-
Inlet Valve + 0.015 suitable for John Deere tractor 45 Deg. + 0.015" Oversize£6.00 Inc VAT £5.00 Exc VATIn stockPart No.1492A -
Inlet Valve STD suitable for John Deere tractor 45 Deg. Standard Size£6.00 Inc VAT £5.00 Exc VATIn stockPart No.1492 -
Exhaust Valve STD suitable for John Deere tractor Standard SizeValve Angle = 45 Degrees
Show More£7.80 Inc VAT £6.50 Exc VATIn stockPart No.1493
Exhaust Valve + 0.015 suitable for John Deere tractor + 0.015" Oversize£8.86 Inc VAT £7.38 Exc VATIn stockPart No.1493A
Valve Kits
-
Valve Train Kit suitable for John Deere tractor Consists of; 4 x Inlet Valve, STD 4 x Exhaust Valve, STD 8 x Valve Spring, Inner 8 x Valve Collet, Pair 8 x Valve Stem Cap£78.00 Inc VAT £65.00 Exc VATIn stockPart No.1498
Valve Springs
-
Valve Spring suitable for John Deere tractor Valve Spring, can be used with both INLET and EXHAUST valve.Overall length - 55cmOverall diameter - 35mm£4.32 Inc VAT £3.60 Exc VATIn stockPart No.1495
Valve Collets
-
Valve Collet (Pair) suitable for John Deere tractor Valve Collet (pair)£1.50 Inc VAT £1.25 Exc VATIn stockPart No.7407
Valve Ancillaries
-
Valve Stem Cap suitable for John Deere tractor Valve Stem Cap£3.60 Inc VAT £3.00 Exc VATIn stockPart No.1496
Rocker Components
-
Rocker Arm suitable for John Deere tractor Rocker Arm£16.80 Inc VAT £14.00 Exc VATIn stockPart No.1501
Studs Cylinder Head
-
Cylinder Head Stud (Pack of 9) suitable for John Deere tractor 1/2" UNC, 9 Studs Per Pack.
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4. Rotate bolt a further 60 Degrees£22.80 Inc VAT £19.00 Exc VATIn stockPart No.1464 -
Cylinder Head Stud - 112MM suitable for John Deere tractor 1/2" UNC 112MM
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4.Then Rotate bolt a further 60 Degrees£10.91 Inc VAT £9.09 Exc VATIn stockPart No.1464A
Cyl Block Gaskets
-
Complete Gasket Set suitable for John Deere tractor Must be supplied with Agriline Part No. 1464: Cylinder Head Studs. Stretch Bolts.£53.99 Inc VAT £44.99 Exc VATIn stockPart No.1458
Engine Kits
-
Engine Overhaul Kit suitable for John Deere tractor Consists of; 4 x Piston, Pin & Clips 4 x Piston Ring Set 4 x Liner c/w Seals 1 x Complete Gasket Set 1 x Front Crank Seal (59mm x 76.5mm x 10mm) 1 x Rear Crank Seal (118mm x 146.1mm x 12.7mm) 4 x Small End Bush- 35mm Piston Pin 2 x Cylinder Hea... Show More£450.00 Inc VAT £375.00 Exc VATIn stockPart No.1468
Oil Cooler
-
Oil Cooler suitable for John Deere tractor 18mm Pipe Diamter£358.80 Inc VAT £299.00 Exc VATIn stockPart No.74324 -
Oil Cooler suitable for John Deere tractor 1040 - Upto Serial Number 704045. 1140 - Upto Serial Number 704045. 2150 - From Serial Number 704045. 2850 - Upto Serial Number 795106.£123.60 Inc VAT £103.00 Exc VATOut of stockPart No.8066
Oil Pumps
-
Oil Pump Assembly suitable for John Deere tractor 3 Bolt fixing with modification Pipes to suit Pumps that were originally 4 Bolt£137.28 Inc VAT £114.40 Exc VATIn stockPart No.1505 -
Oil Pump Assembly suitable for John Deere tractor Later version Oil Pump with 4 Bolt Holes£59.88 Inc VAT £49.90 Exc VATOut of stockPart No.1504
Piston Engine
-
Piston, Ring & Liner Kit suitable for John Deere tractor Includes Liner O-Rings.£84.00 Inc VAT £70.00 Exc VATIn stockPart No.4770 -
Piston, Pin & Clips suitable for John Deere tractor Crown diameter: 105.870mm.Skirt diameter: 106.390mm.Compression height: 66.306mm.Overall height: 112.020mm.Chamber diameter: 58.360mm.Chamber depth: 18.800mm.Pi... Show More£42.96 Inc VAT £35.80 Exc VATIn stockPart No.1442
Piston Rings Engine
-
Piston Ring Set suitable for John Deere tractor No. of Rings = 3 (2.97 x 2.36 x 3.45)£18.00 Inc VAT £15.00 Exc VATIn stockPart No.1443
Liners Engine Cyl
-
Liner C/W Seals suitable for John Deere tractor Finished Liner. Basic Specifications: Bore Dia 106.508 mm Height 196.930 mm. Comes with Sealing Rings. Wet Liner£33.60 Inc VAT £28.00 Exc VATIn stockPart No.1444
Liner Shims & ORings
-
Liner Seal Kit suitable for John Deere tractor Contains 3 Seals to Suit Liners 1444 & 1604£3.20 Inc VAT £2.67 Exc VATIn stockPart No.1450
Sump Gaskets
-
Sump Gasket Paper suitable for John Deere tractor Paper Alternative to 1481 (Cork)£7.20 Inc VAT £6.00 Exc VATIn stockPart No.1483 -
Sump Gasket Cork suitable for John Deere tractor Cork Alternative to 1483 (Paper)£8.40 Inc VAT £7.00 Exc VATIn stockPart No.1481
Crankshafts
-
Crankshaft 4202D 4219D 4239D 4239T suitable for John Deere tractor CrankshaftJohn Deere Tractor Engines 4202D, 4219D, 4239D, 4239T.
Short Nose for Tractors without Crank Driven Hydraulic Pump.Mains: 3.1235"/3.124"Conrods: 2.7485"/2.749"... Show More£474.00 Inc VAT £395.00 Exc VATIn stockPart No.8459
Crankshaft suitable for John Deere tractor Long Nose For Tractors With Hydraulic Pump Driven Of Crank£512.72 Inc VAT £427.27 Exc VATOut of stockPart No.72277
Conrod Bearings
-
Conrod Bearing Pair suitable for John Deere tractor Product is 1 Pair of Shells, + 0.030" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£4.20 Inc VAT £3.50 Exc VATIn stockPart No.1488C -
Conrod Bearing Pair suitable for John Deere tractor Product is 1 Pair of Shells, + 0.010" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£4.20 Inc VAT £3.50 Exc VATIn stockPart No.1488A -
Conrod Bearing Pair suitable for John Deere tractor Product is 1 Pair of Shells, STANDARD For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£5.40 Inc VAT £4.50 Exc VATIn stockPart No.1488 -
Conrod Bearing Pair suitable for John Deere tractor Product is 1 Pair of Shells, + 0.020" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£4.20 Inc VAT £3.50 Exc VATIn stockPart No.1488B
Conrods
-
Conrod suitable for John Deere tractor *Serial Number Break Applies Please View Details*. John Deere. 2040S - From Serial Number 430000. 2650 - Suitable For Collar Shift Transmission Only. 3350 - Upto Serial Number For Spanish Built Models.Pin size - 35mm£66.00 Inc VAT £55.00 Exc VATIn stockPart No.1489
Conrod Bushes
-
Small End Bush suitable for John Deere tractor Small End Bush£4.80 Inc VAT £4.00 Exc VATIn stockPart No.1462
Conrod Bolts & Nuts
-
Connecting Rod Bolt suitable for John Deere tractor 59mm Long. Note, some John Deere Connecting Rod Bolts were set at 54mm£4.20 Inc VAT £3.50 Exc VATIn stockPart No.1491
Gears Crank
-
Ring Gear suitable for John Deere tractor Teeth: 142.£33.60 Inc VAT £28.00 Exc VATIn stockPart No.1574
Crankshaft Seals
-
Front Crank Seal suitable for John Deere tractor Front Crank Seal£9.00 Inc VAT £7.50 Exc VATIn stockPart No.1460 -
Rear Crank Seal suitable for John Deere tractor Rear Crank Seal£21.60 Inc VAT £18.00 Exc VATIn stockPart No.1461
Fly Wheel
-
Fly Wheel suitable for John Deere tractor For Clutch 330mm Diameter With 142 Teeth£289.88 Inc VAT £241.57 Exc VATIn stockPart No.72550
Sump Engine
-
Sump Plug Washer suitable for John Deere tractor Price is Each (Per Washer)£1.45 Inc VAT £1.21 Exc VATIn stockPart No.1506
Bottom Gasket Sets
-
Bottom Gasket Set suitable for John Deere tractor Bottom Gasket Set£24.43 Inc VAT £20.36 Exc VATIn stockPart No.1454
Air Cleaners
-
Pre Cleaner suitable for John Deere tractor Inlet: 76mm (3"). Bowl: 178mm (7").£14.27 Inc VAT £11.89 Exc VATIn stockPart No.2245
Air Filters
-
Air Filter- Outer suitable for John Deere tractor Length: 312mm. ID: 82mm. OD: 161.9mm.Currently unavailablePart No.1525 -
Air Filter- Outer suitable for John Deere tractor Length: 317mm. ID: 82mm. OD: 133.4mm.£59.23 Inc VAT £49.36 Exc VATIn stockPart No.1526 -
Fleetguard AF4212 Air Filter - Outer suitable for John Deere tractorFleetguard AF4212 Axial Seal Primary Air Filter ensures a proper seal and prevent leaks to prevent airborne contaminants from reaching the combustion chamber.Largest OD: 133.10 mmLargest ID: 85.00 mm&nb... Show More£28.90 Inc VAT £24.08 Exc VATIn stockPart No.AF4212
Oil Filters
-
Oil Filter Spin On suitable for John Deere tractor Length: 136.7mm.Diameter: 94.1mm.£7.10 Inc VAT £5.92 Exc VATIn stockPart No.8493
Fuel Filters
-
Fuel Filter suitable for John Deere tractor Baldwin Filter.Currently unavailablePart No.8494
Filter Kits
-
Filter Service Kit suitable for John Deere tractor For Models 1750 & 1850 note, Outside Air Filter in this kit is 312mm Long. Contains: 1 x Oil Filter Spin On. 1 x Fuel Filter. 1 x Inner Air Filter. 1 x Outer Air Filter.£79.18 Inc VAT £65.98 Exc VATIn stockPart No.FSK-901
Fleetguard Engine Filter Kits
-
Cab Handle- Outer RH & LH Lockable suitable for John Deere tractor Fits Ford Sekura LP & AP Cabs from 1982 to 1984.Also suitable for early SG2 cabs.Currently unavailablePart No.15028
Fuel Lift Pumps
-
Fuel Lift Pump w/ Glass Bowl suitable for John Deere tractor Fuel Lift Pump w/ Glass BowlGasket Included£23.99 Inc VAT £19.99 Exc VATIn stockPart No.55008 -
Fuel Lift Pump suitable for John Deere tractor Replacement for original Sofabex or Corona style Lift Pumps.Gasket Included£25.80 Inc VAT £21.50 Exc VATIn stockPart No.55016
Fuel Injectors
-
Injector Line Seal suitable for John Deere tractor I/D Ø : 6.2mm
O/D Ø : 10.5mm
Height : 5.8mm£0.24 Inc VAT £0.20 Exc VATIn stockPart No.1512 -
Fuel Injector suitable for John Deere tractor Fuel InjectorCurrently unavailablePart No.1510 -
Injector Seal suitable for John Deere tractor Tee Fitting Washer.£1.08 Inc VAT £0.90 Exc VATIn stockPart No.1513
Fuel Pump Repair Kit
-
Fuel Lift Pump Repair Kit suitable for John Deere tractor Repairs Fuel Lift Pump 1508£13.20 Inc VAT £11.00 Exc VATIn stockPart No.1509
Fuel Ancillaries
-
Lockable Fuel Cap suitable for John Deere tractor UK Made. Case/IH. 3200 Series - From Serial Number JJE0925810.
£16.76 Inc VAT £13.97 Exc VATIn stockPart No.50443 -
Fuel Cap suitable for John Deere tractor UK Made. Male Thread£12.28 Inc VAT £10.23 Exc VATOut of stockPart No.50442
Gaskets Manifold
-
Exhaust Manifold Gasket suitable for John Deere tractor Exhaust Manifold Gasket£2.40 Inc VAT £2.00 Exc VATIn stockPart No.1507
Gasket Exhaust Elbow
-
£2.40 Inc VAT £2.00 Exc VATIn stockPart No.1515
Silencer Pipe
-
Silencer suitable for John Deere tractor Type: Underhood. Finish: Heat Resistant Black. Fitting Dia. 51.5mm. Overall Length: 38cm. Silencer Length: 22.5cm. Silencer Dia: 16cm.
Up to Serial Number > 429999
£155.99 Inc VAT £129.99 Exc VATIn stockPart No.1517
Exhaust Weather Cap
-
3" Weather Cap suitable for John Deere tractor Counter balance type weather cap, Suitable for 3" / 76.2mm silencer pipe.£9.60 Inc VAT £8.00 Exc VATIn stockPart No.75726