Studs Cylinder Head
-
Cylinder Head Bolt Short.£5.10 Inc VAT £4.25 Exc VATIn stockPart No.4734 -
Injector Stud AD3.152 Injector Stud 5/16 x 53mm£1.44 Inc VAT £1.20 Exc VATIn stockPart No.74151 -
Cylinder Head Bolt Kit Kit Contains:1 x Long Bolt15 x Short Bolt£72.00 Inc VAT £60.00 Exc VATIn stockPart No.75499 -
Phaser 1004.40 Cylinder Head Bolt Kit Consists Of The Following Bolts:
M12 X 1.2 Thread, 129mm Long x 2
M12 X 1.2 Thread, 108mm Long x 12
M12 X 1.2 Thread, 92mm Long x 8
Suitable for Builds: AA. AB, AC AD, AG, AH, AJ, AK Also Suitable For Pekins 4.236 - LD Builds£78.00 Inc VAT £65.00 Exc VATIn stockPart No.74596 -
Cylinder Head Stud - 112MM 1/2" UNC 112MM
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4.Then Rotate bolt a further 60 Degrees£10.91 Inc VAT £9.09 Exc VATIn stockPart No.1464A -
Stud 97mm For A4.212 Engines up to Engine Number UA78663£4.20 Inc VAT £3.50 Exc VATIn stockPart No.92090 -
Stud 48mm For A4.212 Engines upto Engine Number UA78663£3.60 Inc VAT £3.00 Exc VATIn stockPart No.92091 -
Stud 70mm For A4.212 Engines upto Engine Number UA78663£3.60 Inc VAT £3.00 Exc VATIn stockPart No.92089 -
Cylinder Head Stud Kit A4.248, A4.236 Bolts, 8x Short, 12x Medium, 2x Long. For use with Original engines after serial number 236UA43210
Also To Be Used With 7368 & 7376 Aftermarket Blocks
£59.94 Inc VAT £49.95 Exc VATIn stockPart No.8449 -
Cylinder Head Stud Kit - Ford 4cyl Instructions for Torque settings:
Stage 1 - 75 ft lb / 100 Nm.
Stage 2 - 80 ft lb / 110 Nm.
Stage 3 - 85 ft lb / 115 Nm.
Final - 90 ft lb / 122 Nm.£178.80 Inc VAT £149.00 Exc VATIn stockPart No.9940 -
Cylinder Head Stud Kit - Ford 3cyl Instructions for Torque settings;
Stage 1 - 75 ft lb / 100 Nm
Stage 2 - 80 ft lb / 110 Nm
Stage 3 - 85 ft lb / 115 Nm
Final - 90 ft lb / 122 Nm
Stud Size Is 9/16" Thread
Only Suitable For Later Block, Early Bloc... Show More£180.00 Inc VAT £150.00 Exc VATIn stockPart No.9939 -
Cylinder Head Stud Length: 96.5mm
Thread - 7/16 UNF£3.72 Inc VAT £3.10 Exc VATIn stockPart No.47802 -
Cylinder Head Stud 32181447 Length: 88.1mm£2.40 Inc VAT £2.00 Exc VATIn stockPart No.47804 -
Cylinder Head Stud Kit 85mm Only 85mm TE Petrol Engine Consists of 10 x Cylinder Head Studs Use with 50143 Nut 7/16" UNF-HT. Exclusive To Agriline.£61.79 Inc VAT £51.49 Exc VATIn stockPart No.A-900 -
Cylinder Head Stud Set * Only For Use With Original Block *.£80.98 Inc VAT £67.48 Exc VATIn stockPart No.7266 -
Cylinder Head Bolt 21cm Cylinder Head Bolt.Length:- 208MM Including Bolt Head.Diameter:- 12.3MMThread:- 1/2" UNC£7.14 Inc VAT £5.95 Exc VATIn stockPart No.7499 -
Cylinder Head Bolt 12cm Cylinder Head Bolt 12cm. Thread: 1/2".£5.10 Inc VAT £4.25 Exc VATIn stockPart No.7498 -
Nut Cylinder Stud and Conrod Nut 7/16" UNF-HTSuitable For 8696 Cylinder Head Stud, A-856 Cylinder Head Stud & 7143 Conrod BoltMF50B Perkins A4.212 Engine - Rocker Arm Screw Nut.£1.08 Inc VAT £0.90 Exc VATIn stockPart No.50143 -
Stud 105.5 mm Length 731366M1 8 Required.£7.08 Inc VAT £5.90 Exc VATIn stockPart No.7622 -
Cylinder Head Stud (Pack of 9) 1/2" UNC, 9 Studs Per Pack.
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4. Rotate bolt a further 60 Degrees£22.80 Inc VAT £19.00 Exc VATIn stockPart No.1464 -
Stepped Stud 148.5 mm Length 731366M1 6 Required.£8.40 Inc VAT £7.00 Exc VATIn stockPart No.7621 -
Cylinder Head Bolt 132mm FE35 23C Tractor Cylinder Head Bolt (2 Required per tractor). Exclusive To Agriline.£7.20 Inc VAT £6.00 Exc VATIn stockPart No.A-855 -
Cylinder Head Stud 130mm FE35 23C Tractor Cylinder Head Stud, 5 Required per Tractor. Exclusive To Agriline.£4.20 Inc VAT £3.50 Exc VATIn stockPart No.A-852 -
Cylinder Head Stud 32524133 Length: 106.3mm
Thread - 7/16 UNF£6.29 Inc VAT £5.24 Exc VATIn stockPart No.47801 -
Cylinder Head Stud Length: 115.1mm
Thread - 7/16 UNF£5.10 Inc VAT £4.25 Exc VATIn stockPart No.47803 -
Cylinder Head Stud Length (Inc head): 108.5mm£2.64 Inc VAT £2.20 Exc VATIn stockPart No.47806 -
Cylinder Head Stud Length: 93.3mm
Thread - 7/16 UNF£6.88 Inc VAT £5.73 Exc VATIn stockPart No.47805 -
Cylinder Head Stud 110mm 20C Engine Cylinder Head Stud (8 per Tractor). Exclusive To Agriline.£6.30 Inc VAT £5.25 Exc VATIn stockPart No.A-858 -
Cylinder Head Stud Kit 20C TEF Cylinder Head Stud Kit 20C TEF Consists of; 14 x Cylinder Head Stud 127mm 8 x Cylinder Head Stud 110mm Exclusive To Agriline.£67.72 Inc VAT £56.43 Exc VATIn stockPart No.A-902 -
Cylinder Head Bolt 103mm FE35 23C Tractor Cylinder Head Bolt (8 Required per tractor). Exclusive To Agriline.£6.90 Inc VAT £5.75 Exc VATIn stockPart No.A-854 -
Cylinder Head Stud 142mm Length Exclusive to Agriline.Ferguson / Standard Engine Cylinder Head Stud From Serial Number S170174E.142mm Long. 5 1/2" Long.End A: 7/16" BSW x 3/4" Long.End B: 7/16" UNF x 3/4" Long.<... Show More£7.08 Inc VAT £5.90 Exc VATIn stockPart No.8696 -
Cylinder Head Stud 125mm Long Engine Cylinder Head Stud (10 per Tractor) 7/16" N.C. & N.F. x 4 27/32" 80mm Only. Exclusive To Agriline.£8.99 Inc VAT £7.49 Exc VATIn stockPart No.A-856 -
Cylinder Head Bolt 125 mm FE35 23C Tractor Cylinder Head Bolt (9 required per tractor) Exclusive To Agriline!£7.20 Inc VAT £6.00 Exc VATIn stockPart No.A-850 -
Cylinder Head Stud Kit Cylinder Head Stud Kit, Suitable For 4 Cylinder Perkins A4.236 Engines.Kit Contains:-12 Studs:- 56MM Long.8 Studs:- 142MM Long.2 Studs:- 106MM Long.22 Nuts.22 Spring Washers.<... Show More£57.60 Inc VAT £48.00 Exc VATIn stockPart No.80077 -
Cylinder Head Stud Kit Includes:
8 x 3 5/8" x 7/16" UNF
11 x 4 1/4" x 7/16" UNF
4 x 4 1/8" x 7/16" UNF£57.60 Inc VAT £48.00 Exc VATIn stockPart No.80078 -
£5.26 Inc VAT £4.38 Exc VATIn stockPart No.80079 -
Cylinder Head Stud 7/16" x 1 11/16" UNF Perkins Engines A4.212, A4.236, A4.248, T4.236Currently unavailablePart No.4797 -
Cylinder Head Stud 127mm 20C Engine Cylinder Head Stud (14 per Tractor). Exclusive To Agriline.£4.80 Inc VAT £4.00 Exc VATIn stockPart No.A-857