John Deere 6010 Series 6810 Engine PARTS
We stock a wide range of high quality replacement tractor engine spare parts to suit John Deere 6810 tractors. All parts come with an 18 months warranty. Our range includes; cylinder heads, gaskets, valves, engines, blocks, pistons, liners, piston rings, Seals, engine overhaul Kits, fuel pumps, oil pumps, crankshafts, engine bearings, oil filters, fuel filters, fuel pipes, manifolds, silencers and much more.
Cylinder Head Gasket
-
Head Gasket suitable for John Deere tractor Head Gasket£34.80 Inc VAT £29.00 Exc VATIn stockPart No.50373
-
Head Gasket Set suitable for John Deere tractor Head Gasket Set£83.88 Inc VAT £69.90 Exc VATOut of stockPart No.50372
Rocker Cover Gaskets
-
Rocker Cover Gasket suitable for John Deere tractor Rocker Cover Gasket£15.00 Inc VAT £12.50 Exc VATIn stockPart No.50223
Valves Engine
-
Inlet Valve suitable for John Deere tractor Inlet Valve£9.00 Inc VAT £7.50 Exc VATIn stockPart No.1618
-
Exhaust Valve suitable for John Deere tractor Exhaust Valve£9.00 Inc VAT £7.50 Exc VATIn stockPart No.1617
Valve Springs
-
Valve Spring suitable for John Deere tractor Valve Spring, can be used with both INLET and EXHAUST valve.Overall length - 55cmOverall diameter - 35mm£4.32 Inc VAT £3.60 Exc VATIn stockPart No.1495
Valve Collets
-
Valve Collet (Pair) suitable for John Deere tractor Valve Collet (Pair)£2.83 Inc VAT £2.36 Exc VATIn stockPart No.1614
-
Valve Collet (Pair) suitable for John Deere tractor Valve Collet (pair)£1.50 Inc VAT £1.25 Exc VATIn stockPart No.7407
Valve Ancillaries
-
Valve Cap suitable for John Deere tractor Valve CapID: 7.75mmOD: 18mmHeight: 12mm£3.00 Inc VAT £2.50 Exc VATIn stockPart No.1616
-
Exhaust Valve Seat suitable for John Deere tractor Exhaust Valve Seat£5.40 Inc VAT £4.50 Exc VATOut of stockPart No.1619
-
Valve Retainer suitable for John Deere tractor Valve Retainer£10.50 Inc VAT £8.75 Exc VATIn stockPart No.1615
-
Valve Tappet suitable for John Deere tractor Valve Tappet£7.20 Inc VAT £6.00 Exc VATIn stockPart No.1502
-
Valve Stem Cap suitable for John Deere tractor Valve Stem CapOD: 13mmID: 9.4mmThickness: 6mm£3.60 Inc VAT £3.00 Exc VATIn stockPart No.1496
Studs Cylinder Head
-
Cylinder Head Stud (Pack of 9) suitable for John Deere tractor 1/2" UNC, 9 Studs Per Pack.
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4. Rotate bolt a further 60 Degrees£22.80 Inc VAT £19.00 Exc VATIn stockPart No.1464 -
Cylinder Head Stud - 112MM suitable for John Deere tractor 1/2" UNC 112MM
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4.Then Rotate bolt a further 60 Degrees£10.91 Inc VAT £9.09 Exc VATIn stockPart No.1464A
Cyl Block Gaskets
-
Complete Gasket Set - RE66087 suitable for John Deere tractor Complete Gasket Set£90.00 Inc VAT £75.00 Exc VATIn stockPart No.53219
Oil Pumps
-
Oil Pump RE504914 suitable for John Deere tractor Oil Pump.Show More£77.82 Inc VAT £64.85 Exc VATIn stockPart No.75570
Piston Engine
-
Piston, Pin & Clips- RE48469 suitable for John Deere tractor Piston Length: 120mm
Chamber Depth: 22.02mm.£44.88 Inc VAT £37.40 Exc VATIn stockPart No.1636 -
Piston, Pin & Clips suitable for John Deere tractor Al-Fin Ring.Crown diameter: 104.730mm.Skirt diameter: 106.390mm.Compression height: 71.625mm.Overall height: 104.625mm.Chamber diameter: 56.94mm.Chamber depth: 25.45m... Show More£42.84 Inc VAT £35.70 Exc VATIn stockPart No.1602
Piston Rings Engine
-
Piston Ring Set - DD11831 suitable for John Deere tractor No. of Rings = 3 (2.97 x 2.36 x 3.45)Please note - These are Agriline brand for the Federal Mogul equivalent please order part number 1443FM.£18.00 Inc VAT £15.00 Exc VATIn stockPart No.1443
-
Piston Ring Set, Federal Mogul Brand - DD11831 suitable for John Deere tractor No. of Rings: 3 (2.97 x 2.36 x 3.45)Please note: These are Federal Mogul brand; for the Agriline equivalent please order part number 1443.£25.68 Inc VAT £21.40 Exc VATIn stockPart No.1443FM
Liners Engine Cyl
-
Liner C/W Seals - R116397 suitable for John Deere tractor Liner which comes with sealing rings.Dimensions as follows -Bore diameter - 106.27mmFlange diameter - 125.80mmOverall height - 218.86mmFlange width - 9.75mmO... Show More£29.98 Inc VAT £24.98 Exc VATIn stockPart No.1604
Liner Shims & ORings
-
Liner Seal Kit suitable for John Deere tractor Contains 3 Seals to Suit Liners 1444 & 1604£3.20 Inc VAT £2.67 Exc VATIn stockPart No.1450
Crankshafts
-
Crankshaft (Genmot) suitable for John Deere tractorStraight Nose7 Holes flywheel end4 Bolt Holes crank pulley end£1,320.00 Inc VAT £1,100.00 Exc VATIn stockPart No.75501
Crankshafts
-
Crankshaft RE505921 suitable for John Deere tractor Crankshaft6 Bolt Hole Flywheel FixingMains: 3.1235"/3.064"Conrods: 3.0635"/3.064"Stroke: 5.000"Lip SealHol... Show More£1,080.00 Inc VAT £900.00 Exc VATIn stockPart No.74254Crankshaft RE505921 suitable for John Deere tractor Tappered Nose
6 Bolt Hole Flywheel Fixing
£948.00 Inc VAT £790.00 Exc VATIn stockPart No.74246
Conrod Bearings
-
Conrod Bearing Pair suitable for John Deere tractor Standard Size£10.80 Inc VAT £9.00 Exc VATIn stockPart No.1607
-
Conrod Bearing Pair +0.010" - John Deere RE65909 suitable for John Deere tractor Conrod Bearing Pair +0.010" - John Deere RE65909£1.90 Inc VAT £1.58 Exc VATIn stockPart No.1607A
Main Bearings
-
Main Bearing Pair suitable for John Deere tractor Flanged Bearing With Intergrated Thrust - STD.£20.92 Inc VAT £17.43 Exc VATIn stockPart No.1486
-
Main Bearing Pair +0.010" - John Deere RE65911 suitable for John Deere tractor Main Bearing Pair +0.010" - John Deere RE65911Currently unavailablePart No.1609A
-
Main Bearing Thrust (Pair) +0.010" - John Deere RE65912 suitable for John Deere tractor Main Bearing Thrust (Pair) +0.010" - John Deere RE65912Currently unavailablePart No.1608A
Conrods
-
Conrod suitable for John Deere tractor ConrodSmall End/Pin size ID: 41mm.Big End ID: 82.5mm.Total Length: 312mm.Centre to Centre Length: 203mm.£60.00 Inc VAT £50.00 Exc VATIn stockPart No.72386
Conrod Bushes
-
Conrod Bush - R114082 suitable for John Deere tractor Suits John Deere 4045T 6068T 350 Series.4045H/T PowerTech.ID: 40.7mm.OD: 46.1mm.Wall thickness: 2.7mm.£4.56 Inc VAT £3.80 Exc VATIn stockPart No.76593
Conrod Bolts & Nuts
-
Conrod Bolt - R74195 suitable for John Deere tractor Conrod BoltDimensions- Thread: 1/2UNF x 35- Overall Length: 74.80mm£4.03 Inc VAT £3.36 Exc VATIn stockPart No.75568
-
CONROD BOLT - R501124 suitable for John Deere tractor Conrod Bolt.Length: 61mm.Thread: M12 x 1.25.£3.34 Inc VAT £2.78 Exc VATIn stockPart No.76395
Crankshaft Seals
-
Front Crank Seal suitable for John Deere tractor Front Crank Seal£9.00 Inc VAT £7.50 Exc VATIn stockPart No.1460
-
Rear Crank Seal suitable for John Deere tractor Rear Crank Seal£21.60 Inc VAT £18.00 Exc VATIn stockPart No.1461
-
Front Crank Seal suitable for John Deere tractor Front Crank Seal£17.76 Inc VAT £14.80 Exc VATIn stockPart No.1606
Fly Wheel
-
Fly Wheel Ring Gear suitable for John Deere tractor Fly Wheel Ring Gear£46.80 Inc VAT £39.00 Exc VATIn stockPart No.72514
Air Filters
-
Air Filter- Inner suitable for John Deere tractor Length: 130.2mm. ID: 118.3mm. OD: 161.6mm.Currently unavailablePart No.10208
-
Fleetguard AF25228M Inner Air Filter suitable for John Deere tractor Inner Air Filter£102.61 Inc VAT £85.51 Exc VATOut of stockPart No.AF25228M
-
Fleetguard AF25334 Inner Air Filter suitable for John Deere tractor Inner Air FilterCurrently unavailablePart No.AF25334
-
Fleetguard AF25341 Outer Air Filter suitable for John Deere tractor Outer Air Filter£96.00 Inc VAT £80.00 Exc VATOut of stockPart No.AF25341
Oil Filters
-
Oil Filter Spin On suitable for John Deere tractor Oil Filter Spin On£12.00 Inc VAT £10.00 Exc VATOut of stockPart No.10209
-
Oil Filter- Spin On suitable for John Deere tractor Full-Flow Lube Spin-on.£34.08 Inc VAT £28.40 Exc VATIn stockPart No.1587
-
Fleetguard LF3703 Oil Filter suitable for John Deere tractor Overall height: 146mm, OD: 94mm, Thread size: 11/2 - 16 UN-2B UN-2B,£18.00 Inc VAT £15.00 Exc VATIn stockPart No.LF3703
Fuel Filters
-
Secondary Fuel Filter suitable for John Deere tractor Water Separator Element with Drain. Used On Models With Single Fuel Filter.Out of stockPart No.10206
-
Primary Fuel Filter suitable for John Deere tractor 30 Microns.
O.D: 83.3mm.
I.D: 16.7mm One End.
Length: 151.6mm.
Out of stockPart No.10215 -
Fuel Filter 5 Micron Final Filter suitable for John Deere tractor Secondary Fuel/Water Coalescer Element with Drain.Currently unavailablePart No.1585
-
Fuel Filter- Element suitable for John Deere tractor Dual-Stage Box-Style Metal Fuel Filter.£34.80 Inc VAT £29.00 Exc VATOut of stockPart No.1586
-
Fleetguard FS1212 Fuel Filter suitable for John Deere tractor Overall height: 201mm, OD: 93mm, Thread size: 1 - 14 UNS-2B, UNS-2B£27.77 Inc VAT £23.14 Exc VATIn stockPart No.FS1212
-
Fleetguard FS19830 Fuel Filter suitable for John Deere tractor Overall height: 155mm, OD: 84mm, Inside Ø - End 1: 17mm, Inside Ø - End 2: mm.£21.60 Inc VAT £18.00 Exc VATIn stockPart No.FS19830
-
Fleetguard FS19831 Fuel Filter suitable for John Deere tractor Overall height: 135mm, OD: 84mm, Inside Ø - End 1: 17mm, Inside Ø - End 2: mm.£26.40 Inc VAT £22.00 Exc VATIn stockPart No.FS19831
-
Fleetguard FS19861 Fuel Filter suitable for John Deere tractor Overall height: 155mm, OD: 84mm, Thread size: -,£23.22 Inc VAT £19.35 Exc VATIn stockPart No.FS19861
-
Fleetguard FS19840 Secondary Fuel Filter suitable for John Deere tractorFleetguard FS19840 fuel water separator cartridge filter works to remove water and other particulates and ensures clean fuel is delivered to your engine.Length: 173.00 mmLargest OD: 84.00 mmL... Show More£33.47 Inc VAT £27.89 Exc VATIn stockPart No.FS19840Fleetguard FF5850 Inline Fuel Filter - AL153517 suitable for John Deere tractorFleetguard FF5850 in-line fuel filter ensures optimal fuel system protection from contaminants.Media Type: Wire MeshLength: 117.50 mm£11.40 Inc VAT £9.50 Exc VATIn stockPart No.FF5850
Filter Kits
-
Engine Filter Service Kit suitable for John Deere tractorEngine filter service kit suitable for John Deere 6510-6910 tractors.For SE and Premium modelsKit Contains- Engine Oil Filter- Fuel Filter... Show More£192.00 Inc VAT £160.00 Exc VATOut of stockPart No.FSK-5014
Fleetguard Engine Filter Kits
-
Filter Service Kit engine suitable for John Deere tractor Power Tech - 6068 Turbo Engine
Fuel Filter x 1
Inner Air Filter x 1
Oil Filter x 1
Outer Air Filter x 1£196.78 Inc VAT £163.98 Exc VATOut of stockPart No.FFK629
Fleetguard Full Filter Kits
-
Filter Service Full kit suitable for John Deere tractor Power Tech - 6068 Turbo Engine
Cab Filter x 2
Fuel Filter x 1
Hydraulic Oil Filter x 1
Hydraulic Oil Filter x 1
Hydraulic Oil Filter x 1
Hydraulic Oil Filter x 1
Inner Air Filter x 1
Oil Filter x 1
Outer A... Show More£535.82 Inc VAT £446.52 Exc VATOut of stockPart No.FFK628
Fuel Lift Pumps
-
Fuel Lift Pump w/ Glass Bowl suitable for John Deere tractor Fuel Lift Pump w/ Glass BowlGasket Included£23.99 Inc VAT £19.99 Exc VATIn stockPart No.55008
-
Fuel Lift Pump suitable for John Deere tractor Replacement for original Sofabex or Corona style Lift Pumps.Gasket Included£25.80 Inc VAT £21.50 Exc VATIn stockPart No.55016
Fuel Pumps Electric
-
Filter Head Fuel Pump suitable for John Deere tractor Filter Head Fuel Pump.Two Metal Prongs Inside Connecting Plug.£113.99 Inc VAT £94.99 Exc VATIn stockPart No.9602
-
Fuel Pump suitable for John Deere tractor Mounted In Tank. Stanadyne.£125.11 Inc VAT £104.26 Exc VATIn stockPart No.9477
Fuel Pipes
-
Tee Fitting - R71963 suitable for John Deere tractor Tee fitting for Injectors suitable for John Deere.Thread: M14.£10.80 Inc VAT £9.00 Exc VATIn stockPart No.76562
Fuel Injectors
-
Injector Line Seal suitable for John Deere tractor I/D Ø : 6.2mm
O/D Ø : 10.5mm
Height : 5.8mm£0.24 Inc VAT £0.20 Exc VATIn stockPart No.1512 -
Fuel Injector suitable for John Deere tractor Fuel Injector Nozzle - Marked 29279Currently unavailablePart No.1611
Fuel Injector Nozzle
-
Injector Seal Kit - RE64292 suitable for John Deere tractor Injector Seal Kit.Suitable for a wide range of John Deere machines fitted with 'Pencil Style' injectors.One kit required per Injector.£4.38 Inc VAT £3.65 Exc VATIn stockPart No.75961
Fuel Ancillaries
-
Lockable Fuel Cap suitable for John Deere tractor UK Made. Case/IH. 3200 Series - From Serial Number JJE0925810.
£17.94 Inc VAT £14.95 Exc VATIn stockPart No.50443 -
Fuel Shut Off Solenoid - RE22744 suitable for John Deere tractor Fuel Shut Off SolenoidFuel Thread OD: 13.7mm£21.60 Inc VAT £18.00 Exc VATOut of stockPart No.2074
-
Fuel Cap suitable for John Deere tractor UK Made. Male Thread£12.28 Inc VAT £10.23 Exc VATIn stockPart No.50442
-
Fuel Shut Off Solenoid suitable for John Deere tractor Fuel Shut Off Solenoid£21.00 Inc VAT £17.50 Exc VATOut of stockPart No.2073
Fuel Filter Housings
-
Fuel Filter Sediment Bowl - RE51650 suitable for John Deere tractor Fuel filter sediment bowl suitable for John DeereThread Size: M10 x 1.5OD: 80mm£34.80 Inc VAT £29.00 Exc VATIn stockPart No.76551
Turbochargers
-
Turbocharger - RE500291 suitable for John Deere tractor Turbocharger suitable for John Deere 6010 and 6020 6.8L 6 Cylinder engines.Manifold Hole Centers: 82mm x 70mmIncludes fitting gaskets.£274.80 Inc VAT £229.00 Exc VATIn stockPart No.76523
Exhaust Pipe
-
Flexible Exhaust Coupler suitable for John Deere tractor I.D: 61mm.
Approx. Length: 255mm.
£75.00 Inc VAT £62.50 Exc VATIn stockPart No.80128 -
Exhaust Pipe suitable for John Deere tractor Exhaust PipeFitting Size: 77mmOverall Length: 1010mm£39.00 Inc VAT £32.50 Exc VATIn stockPart No.80223
-
Exhaust Pipe Heat Shield suitable for John Deere tractor Length 1340mm X 125mm.
£108.00 Inc VAT £90.00 Exc VATIn stockPart No.80227
Silencer Pipe
-
Silencer Pipe suitable for John Deere tractor Deluxe Exhaust. Length: 1770mm Diameter: 66mm.£75.00 Inc VAT £62.50 Exc VATIn stockPart No.1652
-
Silencer Pipe suitable for John Deere tractor Lower Pipe. Length: 735mm. Diameter: 63mm.£60.00 Inc VAT £50.00 Exc VATIn stockPart No.1653
-