John Deere 6010 Series 6310 Engine PARTS
We stock a wide range of high quality replacement tractor engine spare parts to suit John Deere 6310 tractors. All parts come with an 18 months warranty. Our range includes; cylinder heads, gaskets, valves, engines, blocks, pistons, liners, piston rings, Seals, engine overhaul Kits, fuel pumps, oil pumps, crankshafts, engine bearings, oil filters, fuel filters, fuel pipes, manifolds, silencers and much more.
Cylinder Head Gasket
-
Head Gasket Set suitable for John Deere tractor Head Gasket Set£58.80 Inc VAT £49.00 Exc VATIn stockPart No.50370
Rocker Cover Gaskets
-
Rocker Cover Gasket suitable for John Deere tractor Rocker Cover Gasket£12.00 Inc VAT £10.00 Exc VATIn stockPart No.1605
Valves Engine
-
Inlet Valve suitable for John Deere tractor Inlet Valve£9.00 Inc VAT £7.50 Exc VATIn stockPart No.1618
-
Exhaust Valve suitable for John Deere tractor Exhaust Valve£9.00 Inc VAT £7.50 Exc VATIn stockPart No.1617
Valve Springs
-
Valve Spring suitable for John Deere tractor Valve Spring, can be used with both INLET and EXHAUST valve.Overall length - 55cmOverall diameter - 35mm£4.32 Inc VAT £3.60 Exc VATIn stockPart No.1495
Valve Collets
-
Valve Collet (Pair) suitable for John Deere tractor Valve Collet (Pair)£2.83 Inc VAT £2.36 Exc VATIn stockPart No.1614
-
Valve Collet (Pair) suitable for John Deere tractor Valve Collet (pair)£1.50 Inc VAT £1.25 Exc VATIn stockPart No.7407
Valve Ancillaries
-
Valve Cap suitable for John Deere tractor Valve CapID: 7.75mmOD: 18mmHeight: 12mm£3.00 Inc VAT £2.50 Exc VATIn stockPart No.1616
-
Exhaust Valve Seat suitable for John Deere tractor Exhaust Valve Seat£5.40 Inc VAT £4.50 Exc VATOut of stockPart No.1619
-
Valve Retainer suitable for John Deere tractor Valve Retainer£10.50 Inc VAT £8.75 Exc VATIn stockPart No.1615
-
Valve Tappet suitable for John Deere tractor Valve Tappet£7.20 Inc VAT £6.00 Exc VATIn stockPart No.1502
-
Valve Stem Cap suitable for John Deere tractor Valve Stem CapOD: 13mmID: 9.4mmThickness: 6mm£3.60 Inc VAT £3.00 Exc VATIn stockPart No.1496
Studs Cylinder Head
-
Cylinder Head Stud (Pack of 9) suitable for John Deere tractor 1/2" UNC, 9 Studs Per Pack.
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4. Rotate bolt a further 60 Degrees£22.80 Inc VAT £19.00 Exc VATIn stockPart No.1464 -
Cylinder Head Stud - 112MM suitable for John Deere tractor 1/2" UNC 112MM
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4.Then Rotate bolt a further 60 Degrees£10.91 Inc VAT £9.09 Exc VATIn stockPart No.1464A
Cyl Block Gaskets
-
Complete Gasket Set suitable for John Deere tractor Complete Gasket Set£65.99 Inc VAT £54.99 Exc VATIn stockPart No.50371
Oil Cooler
-
Oil Cooler suitable for John Deere tractor 6100,6200,6300- From Serial Number 113502.£539.10 Inc VAT £449.25 Exc VAT2-3 working daysPart No.9413
-
Oil Cooler - 9 Plate - RE59298 suitable for John Deere tractor Oil Cooler suitable for John Deere9 Plate Oil Cooler£117.84 Inc VAT £98.20 Exc VATOut of stockPart No.77068
Oil Pumps
-
Engine Oil Pump Pipe suitable for John Deere tractor Engine Oil Pump PipeOD: 15.60mm£21.60 Inc VAT £18.00 Exc VATIn stockPart No.81246
-
Oil Pump Assembly suitable for John Deere tractor Later version Oil Pump with 4 Bolt Holes£59.88 Inc VAT £49.90 Exc VATIn stockPart No.1504
-
Oil Pump RE504914 suitable for John Deere tractor Oil Pump.Show More£77.82 Inc VAT £64.85 Exc VATIn stockPart No.75570
Balancer Units
-
Balancer Bush - R115299 suitable for John Deere tractor ID: 40.2mm.OD: 43.34mm.Height: 27.7mm.£5.88 Inc VAT £4.90 Exc VATIn stockPart No.76577
Piston Engine
-
Piston, Pin & Clips suitable for John Deere tractor Crown diameter: 105.870mm.Skirt diameter: 106.390mm.Compression height: 66.306mm.Overall height: 112.020mm.Chamber diameter: 58.360mm.Chamber depth: 18.800mm.Pi... Show More£42.96 Inc VAT £35.80 Exc VATIn stockPart No.1442Piston, Pin & Clips suitable for John Deere tractor Al-Fin Ring.Crown diameter: 104.730mm.Skirt diameter: 106.390mm.Compression height: 71.625mm.Overall height: 104.625mm.Chamber diameter: 56.94mm.Chamber depth: 25.45m... Show More£42.84 Inc VAT £35.70 Exc VATIn stockPart No.1602
Piston Rings Engine
-
Piston Ring Set - DD11831 suitable for John Deere tractor No. of Rings = 3 (2.97 x 2.36 x 3.45)Please note - These are Agriline brand for the Federal Mogul equivalent please order part number 1443FM.£18.00 Inc VAT £15.00 Exc VATIn stockPart No.1443
-
Piston Ring Set - RE66271 suitable for John Deere tractor For use with Piston 1600.Please note - These are Agriline brand for the Federal Mogul equivalent please order part number 1601FM.£16.80 Inc VAT £14.00 Exc VATIn stockPart No.1601
-
Piston Ring Set, Federal Mogul Brand - DD11831 suitable for John Deere tractor No. of Rings: 3 (2.97 x 2.36 x 3.45)Please note: These are Federal Mogul brand; for the Agriline equivalent please order part number 1443.£25.68 Inc VAT £21.40 Exc VATIn stockPart No.1443FM
-
Piston Ring Set, Federal Mogul Brand - RE66271 suitable for John Deere tractor For use with Piston Agriline Part No. 1600.Please note: These are Federal Mogul brand; for the Agriline equivalent please order part number 1601.£26.10 Inc VAT £21.75 Exc VATIn stockPart No.1601FM
Engine Mount
-
Rubber Isolator - AL81953 suitable for John Deere tractorRubber Isolator.Suitable for 5020, 6000, 6005, 6010, and 6020 Series John Deere applications.Fits between engine and chassis rails.ID: 13.5mm.OD: 48mm.Note: On 6000 S... Show More£8.40 Inc VAT £7.00 Exc VATIn stockPart No.76197
Liners Engine Cyl
-
Liner C/W Seals - R116397 suitable for John Deere tractor Liner which comes with sealing rings.Dimensions as follows -Bore diameter - 106.27mmFlange diameter - 125.80mmOverall height - 218.86mmFlange width - 9.75mmO... Show More£29.98 Inc VAT £24.98 Exc VATIn stockPart No.1604
Liner Shims & ORings
-
Liner Seal Kit suitable for John Deere tractor Contains 3 Seals to Suit Liners 1444 & 1604£3.20 Inc VAT £2.67 Exc VATIn stockPart No.1450
Sump Gaskets
-
Sump Gasket suitable for John Deere tractor Sump Gasket£7.80 Inc VAT £6.50 Exc VATIn stockPart No.1610
-
Sump Gasket Paper suitable for John Deere tractor Paper Alternative to 1481 (Cork)£7.20 Inc VAT £6.00 Exc VATIn stockPart No.1483
-
Sump Gasket Cork suitable for John Deere tractor Cork Alternative to 1483 (Paper)£8.40 Inc VAT £7.00 Exc VATIn stockPart No.1481
Crankshafts
-
Crankshaft - RE50618 suitable for John Deere tractor Genmot Crank Shaft suitable for John Deere *NOTE - Crankshaft will require cleaning to remove any rust preventative prior to fitting*DimensionsMain journal: 80mmConrod journal: 78mmNose length... Show More£570.00 Inc VAT £475.00 Exc VATOut of stockPart No.1621Crankshaft (Genmot) suitable for John Deere tractor Crankshaft (Genmot)Currently unavailablePart No.72279
Conrod Bearings
-
Conrod Bearing Pair suitable for John Deere tractor Standard Size£10.80 Inc VAT £9.00 Exc VATIn stockPart No.1607
-
Conrod Bearing Pair +0.010" - John Deere RE65909 suitable for John Deere tractor Conrod Bearing Pair +0.010" - John Deere RE65909£1.90 Inc VAT £1.58 Exc VATIn stockPart No.1607A
Main Bearings
-
Main Bearing Pair suitable for John Deere tractor Flanged Bearing With Intergrated Thrust - STD.£20.92 Inc VAT £17.43 Exc VATIn stockPart No.1486
-
Main Bearing Pair +0.010" - John Deere RE65911 suitable for John Deere tractor Main Bearing Pair +0.010" - John Deere RE65911Currently unavailablePart No.1609A
-
Main Bearing Thrust (Pair) +0.010" - John Deere RE65912 suitable for John Deere tractor Main Bearing Thrust (Pair) +0.010" - John Deere RE65912Currently unavailablePart No.1608A
Conrods
-
Conrod suitable for John Deere tractor *Serial Number Break Applies Please View Details*. John Deere. 2040S - From Serial Number 430000. 2650 - Suitable For Collar Shift Transmission Only. 3350 - Upto Serial Number For Spanish Built Models.Small End/Pin size ID: 34mm... Show More£66.00 Inc VAT £55.00 Exc VATIn stockPart No.1489Conrod suitable for John Deere tractor ConrodSmall End/Pin size ID: 41mm.Big End ID: 82.5mm.Total Length: 312mm.Centre to Centre Length: 203mm.£60.00 Inc VAT £50.00 Exc VATIn stockPart No.72386
Conrod Bushes
-
Conrod Bush - R114082 suitable for John Deere tractor Suits John Deere 4045T 6068T 350 Series.4045H/T PowerTech.ID: 40.7mm.OD: 46.1mm.Wall thickness: 2.7mm.£4.56 Inc VAT £3.80 Exc VATIn stockPart No.76593
Conrod Bolts & Nuts
-
Conrod Bolt R114083 suitable for John Deere tractor Length: 64mm.John Deere 4045D, 6068D, 4045T, 6068T.£3.41 Inc VAT £2.84 Exc VATIn stockPart No.75569
-
Connecting Rod Bolt suitable for John Deere tractor 59mm Long. Note, some John Deere Connecting Rod Bolts were set at 54mm£4.20 Inc VAT £3.50 Exc VATIn stockPart No.1491
-
CONROD BOLT - R501124 suitable for John Deere tractor Conrod Bolt.Length: 61mm.Thread: M12 x 1.25.£3.34 Inc VAT £2.78 Exc VATIn stockPart No.76395
Gears Crank
Crankshaft Seals
-
Front Crank Seal suitable for John Deere tractor Front Crank Seal£9.00 Inc VAT £7.50 Exc VATIn stockPart No.1460
-
Rear Crank Seal suitable for John Deere tractor Rear Crank Seal£21.60 Inc VAT £18.00 Exc VATIn stockPart No.1461
-
Front Crank Seal suitable for John Deere tractor Front Crank Seal£17.76 Inc VAT £14.80 Exc VATIn stockPart No.1606
Camshaft
-
Camshaft suitable for John Deere tractor CamshaftDimensions- Overall Length: 585mm- Journal Diameter: 55.80mm£163.63 Inc VAT £136.36 Exc VATIn stockPart No.1622
-
Camshaft Bush R119874 suitable for John Deere tractor John Deere 4039T, 6359DOD: 60mmID: 56mmLength: 38.8mm£8.28 Inc VAT £6.90 Exc VATIn stockPart No.75573
Air Filters
-
Air Filter- Inner suitable for John Deere tractor Length: 131.8mm ID: 92.1mm. OD: 127.8mm. Flange Diameter: 198.4mm.Currently unavailablePart No.10211
-
Fleetguard AF25301 Inner Air Filter suitable for John Deere tractor Inner Air Filter£38.39 Inc VAT £31.99 Exc VATIn stockPart No.AF25301
-
Fleetguard AF25300 Outer Air Filter suitable for John Deere tractor Outer Air Filter£66.00 Inc VAT £55.00 Exc VATIn stockPart No.AF25300
Oil Filters
-
Oil Filter Spin On suitable for John Deere tractor Oil Filter Spin On£12.00 Inc VAT £10.00 Exc VATOut of stockPart No.10209
-
Fleetguard LF3703 Oil Filter suitable for John Deere tractor Overall height: 146mm, OD: 94mm, Thread size: 11/2 - 16 UN-2B UN-2B,£18.00 Inc VAT £15.00 Exc VATIn stockPart No.LF3703
Fuel Filters
-
Secondary Fuel Filter suitable for John Deere tractor Water Separator Element with Drain. Used On Models With Single Fuel Filter.Out of stockPart No.10206
-
Primary Fuel Filter suitable for John Deere tractor 30 Microns.
O.D: 83.3mm.
I.D: 16.7mm One End.
Length: 151.6mm.
Out of stockPart No.10215 -
Fuel Filter 5 Micron Final Filter suitable for John Deere tractor Secondary Fuel/Water Coalescer Element with Drain.Currently unavailablePart No.1585
-
Fleetguard FS19830 Fuel Filter suitable for John Deere tractor Overall height: 155mm, OD: 84mm, Inside Ø - End 1: 17mm, Inside Ø - End 2: mm.£21.60 Inc VAT £18.00 Exc VATIn stockPart No.FS19830
-
Fleetguard FS19831 Fuel Filter suitable for John Deere tractor Overall height: 135mm, OD: 84mm, Inside Ø - End 1: 17mm, Inside Ø - End 2: mm.£26.40 Inc VAT £22.00 Exc VATIn stockPart No.FS19831
-
Fleetguard FS19861 Fuel Filter suitable for John Deere tractor Overall height: 155mm, OD: 84mm, Thread size: -,£23.22 Inc VAT £19.35 Exc VATIn stockPart No.FS19861
-
Fleetguard FS19840 Secondary Fuel Filter suitable for John Deere tractorFleetguard FS19840 fuel water separator cartridge filter works to remove water and other particulates and ensures clean fuel is delivered to your engine.Length: 173.00 mmLargest OD: 84.00 mmL... Show More£33.47 Inc VAT £27.89 Exc VATIn stockPart No.FS19840
Filter Kits
-
Filter Service Kit suitable for John Deere tractor Contains; Oil Filter Fuel Filter Air Filter (Outer) Air Filter (Inner)£174.62 Inc VAT £145.52 Exc VATOut of stockPart No.FSK804
-
Filter Service Kit Premium suitable for John Deere tractorFilter Kit suitable for John Deere 6010 - 6410 Premium.With screw on transmission and hydraulic filters.Suitable for Powerquad transmission and 40cm³ hydraulic pump.K... Show More£293.57 Inc VAT £244.64 Exc VATOut of stockPart No.FSK-5012
Fleetguard Engine Filter Kits
-
Filter Service Kit engine suitable for John Deere tractor Power Tech - 4045 Engine
Outer Air Filter x 1
Fuel Filter x 1
Inner Air Filter x 1
Oil Filter x 1£155.83 Inc VAT £129.86 Exc VATIn stockPart No.FFK601
Fleetguard Full Filter Kits
-
Filter Service Full kit suitable for John Deere tractor Power Tech - 4045 Engine
Outer Air Filter x 1
Cab Filter x 2
Fuel Filter x 1
Hydraulic Oil Filter x 1
Hydraulic Oil Filter x 1
Hydraulic Oil Filter x 1
Hydraulic Oil Filter x 1
Inner Air Filter x 1
Oil Fi... Show More£538.63 Inc VAT £448.86 Exc VATIn stockPart No.FFK600
Fuel Lift Pumps
-
Fuel Lift Pump w/ Glass Bowl suitable for John Deere tractor Fuel Lift Pump w/ Glass BowlGasket Included£23.99 Inc VAT £19.99 Exc VATIn stockPart No.55008
-
Fuel Lift Pump suitable for John Deere tractor Replacement for original Sofabex or Corona style Lift Pumps.Gasket Included£25.80 Inc VAT £21.50 Exc VATIn stockPart No.55016
Fuel Pumps Electric
-
Filter Head Fuel Pump suitable for John Deere tractor Filter Head Fuel Pump.Two Metal Prongs Inside Connecting Plug.£113.99 Inc VAT £94.99 Exc VATIn stockPart No.9602
-
Fuel Pump suitable for John Deere tractor Mounted In Tank. Stanadyne.£125.11 Inc VAT £104.26 Exc VATIn stockPart No.9477
Fuel Pipes
-
Tee Fitting - R71963 suitable for John Deere tractor Tee fitting for Injectors suitable for John Deere.Thread: M14.£10.80 Inc VAT £9.00 Exc VATIn stockPart No.76562
Fuel Injectors
-
Injector Line Seal suitable for John Deere tractor I/D Ø : 6.2mm
O/D Ø : 10.5mm
Height : 5.8mm£0.24 Inc VAT £0.20 Exc VATIn stockPart No.1512 -
Fuel Injector RE60062 suitable for John Deere tractor Fuel Injector.Tee Connector Not Included.Suitable For Replacing Injectors With Injector Nozzle Number:- 28478 / 32262£42.00 Inc VAT £35.00 Exc VATIn stockPart No.1612
-
Fuel Injector suitable for John Deere tractor Fuel Injector Nozzle - Marked 29279Currently unavailablePart No.1611
Fuel Injector Nozzle
-
Injector Seal Kit - RE64292 suitable for John Deere tractor Injector Seal Kit.Suitable for a wide range of John Deere machines fitted with 'Pencil Style' injectors.One kit required per Injector.£4.38 Inc VAT £3.65 Exc VATIn stockPart No.75961
Fuel Ancillaries
-
Lockable Fuel Cap suitable for John Deere tractor UK Made. Case/IH. 3200 Series - From Serial Number JJE0925810.
£17.94 Inc VAT £14.95 Exc VATIn stockPart No.50443 -
Fuel Shut Off Solenoid - RE22744 suitable for John Deere tractor Fuel Shut Off SolenoidFuel Thread OD: 13.7mm£21.60 Inc VAT £18.00 Exc VATOut of stockPart No.2074
-
Fuel Cap suitable for John Deere tractor UK Made. Male Thread£12.28 Inc VAT £10.23 Exc VATIn stockPart No.50442
-
Fuel Shut Off Solenoid suitable for John Deere tractor Fuel Shut Off Solenoid£21.00 Inc VAT £17.50 Exc VATOut of stockPart No.2073
Fuel Filter Housings
-
Fuel Filter Sediment Bowl - RE51650 suitable for John Deere tractor Fuel filter sediment bowl suitable for John DeereThread Size: M10 x 1.5OD: 80mm£34.80 Inc VAT £29.00 Exc VATIn stockPart No.76551
Filler Caps Oil
-
Engine Oil Cap suitable for John Deere tractor Engine Oil Cap£5.70 Inc VAT £4.75 Exc VATIn stockPart No.74959
-
Oil Filler Cap with Dipstick suitable for John Deere tractor Oil Filler Cap with Dipstick£16.76 Inc VAT £13.97 Exc VATIn stockPart No.80133
Exhaust Pipe
-
Exhaust Lower Pipe suitable for John Deere tractor Suitable for corner post exhaust systems only.£35.40 Inc VAT £29.50 Exc VATOut of stockPart No.74659
-
Exhaust Pipe suitable for John Deere tractor Suitable for John Deere 6000 & 6010 Series.Currently unavailablePart No.74598
-
Exhaust Pipe suitable for John Deere tractor Exhaust PipeOut of stockPart No.80220
-
Exhaust Pipe Heat Shield suitable for John Deere tractor Length 1480mm X 100mm.
£108.00 Inc VAT £90.00 Exc VATOut of stockPart No.80226
Silencer Pipe
-
Silencer Box suitable for John Deere tractor Underhood. Heat Resistant black finish.Fitting Diameter = 66mm£99.00 Inc VAT £82.50 Exc VATOut of stockPart No.1632
-
Silencer suitable for John Deere tractorSilencer, RH side mountedDimensions- Inlet ID: 60.70mm- Exhaust OD: 64mm- Body Length: 245mm- Body Width: 175m... Show More£99.00 Inc VAT £82.50 Exc VATIn stockPart No.1624Silencer Box suitable for John Deere tractor Exhaust Exits From Left Hand Side of Bonnet. Type: Underhood. Finish: Heat Resistant Black or galvanised£99.00 Inc VAT £82.50 Exc VATIn stockPart No.1649Silencer Pipe suitable for John Deere tractor Mounted On The Left Hand Side. Length: 1000mm. Diameter: 64mm John Deere. 6100 - From Serial Number 143102. 6200 - From Serial Number 143102. 6300 - From Serial Number 143102. 6400 - From Serial Number 143102.£45.00 Inc VAT £37.50 Exc VATIn stockPart No.1633