John Deere 6000 Series 6300 Engine PARTS
We stock a wide range of high quality replacement tractor engine spare parts to suit John Deere 6300 tractors. All parts come with an 18 months warranty. Our range includes; cylinder heads, gaskets, valves, engines, blocks, pistons, liners, piston rings, Seals, engine overhaul Kits, fuel pumps, oil pumps, crankshafts, engine bearings, oil filters, fuel filters, fuel pipes, manifolds, silencers and much more.
Cylinder Head Gasket
-
Head Gasket suitable for John Deere tractor Head Gasket£14.40 Inc VAT £12.00 Exc VATIn stockPart No.1475
Valve Springs
-
Valve Spring suitable for John Deere tractor Valve Spring, can be used with both INLET and EXHAUST valve.Overall length - 55cmOverall diameter - 35mm£4.32 Inc VAT £3.60 Exc VATIn stockPart No.1495
Valve Collets
-
Valve Collet (Pair) suitable for John Deere tractor Valve Collet (pair)£1.50 Inc VAT £1.25 Exc VATIn stockPart No.7407
Valve Ancillaries
-
Valve Cap suitable for John Deere tractor Valve CapID: 7.75mmOD: 18mmHeight: 12mm£3.00 Inc VAT £2.50 Exc VATIn stockPart No.1616 -
Exhaust Valve Seat suitable for John Deere tractor Exhaust Valve Seat£5.40 Inc VAT £4.50 Exc VATOut of stockPart No.1619 -
Valve Retainer suitable for John Deere tractor Valve Retainer£10.50 Inc VAT £8.75 Exc VATIn stockPart No.1615 -
Valve Tappet suitable for John Deere tractor Valve Tappet£7.20 Inc VAT £6.00 Exc VATIn stockPart No.1502 -
Valve Stem Cap suitable for John Deere tractor Valve Stem CapOD: 13mmID: 9.4mmThickness: 6mm£3.60 Inc VAT £3.00 Exc VATIn stockPart No.1496
Studs Cylinder Head
-
Cylinder Head Stud (Pack of 9) suitable for John Deere tractor 1/2" UNC, 9 Studs Per Pack.
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4. Rotate bolt a further 60 Degrees£22.80 Inc VAT £19.00 Exc VATIn stockPart No.1464 -
Cylinder Head Stud - 112MM suitable for John Deere tractor 1/2" UNC 112MM
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4.Then Rotate bolt a further 60 Degrees£10.91 Inc VAT £9.09 Exc VATIn stockPart No.1464A
Oil Cooler
-
Oil Cooler suitable for John Deere tractor 6100,6200,6300- From Serial Number 113502.£539.10 Inc VAT £449.25 Exc VAT2-3 working daysPart No.9413 -
Oil Cooler suitable for John Deere tractor 1140 - From Serial Number 704046. 2850 - From Serial Number 795107. 3200 - From Serial Number 189846. 3300 - From Serial Number 189846. 3400 - From Serial Number 189846.£93.60 Inc VAT £78.00 Exc VATIn stockPart No.8089 -
Oil Cooler - RE61767 suitable for John Deere tractor Oil Cooler suitable for John DeereDimensionsThickness: 40mmWater Outlets Diameter: 16mm£103.80 Inc VAT £86.50 Exc VATOut of stockPart No.77067 -
Oil Cooler suitable for John Deere tractor 1040 - Upto Serial Number 704045. 1140 - Upto Serial Number 704045. 2150 - From Serial Number 704045. 2850 - Upto Serial Number 795106.£123.60 Inc VAT £103.00 Exc VATIn stockPart No.8066
Oil Pumps
-
Engine Oil Pump Pipe suitable for John Deere tractor Engine Oil Pump PipeOD: 15.60mm£21.60 Inc VAT £18.00 Exc VATIn stockPart No.81246 -
Oil Pump Assembly suitable for John Deere tractor 3 Bolt fixing with modification Pipes to suit Pumps that were originally 4 Bolt£137.28 Inc VAT £114.40 Exc VATIn stockPart No.1505 -
Oil Pump Assembly suitable for John Deere tractor Later version Oil Pump with 4 Bolt Holes£59.88 Inc VAT £49.90 Exc VATIn stockPart No.1504 -
£123.38 Inc VAT £102.82 Exc VATOut of stockPart No.75571
Piston Engine
-
Piston, Pin & Clips suitable for John Deere tractor Crown diameter; 104.750mm.Skirt diameter: 106.390mm.Compression height: 66.300mm.Overall height: 111.970mm.Chamber diameter: 58.420mm.Chamber depth: 18.620mm.Pi... Show More£39.60 Inc VAT £33.00 Exc VATIn stockPart No.1445
Piston Rings Engine
-
Piston Ring Set - DD11831 suitable for John Deere tractor No. of Rings = 3 (2.97 x 2.36 x 3.45)Please note - These are Agriline brand for the Federal Mogul equivalent please order part number 1443FM.£18.00 Inc VAT £15.00 Exc VATIn stockPart No.1443 -
Piston Ring Set, Federal Mogul Brand - DD11831 suitable for John Deere tractor No. of Rings: 3 (2.97 x 2.36 x 3.45)Please note: These are Federal Mogul brand; for the Agriline equivalent please order part number 1443.£25.68 Inc VAT £21.40 Exc VATIn stockPart No.1443FM
Engine Mount
-
Rubber Isolator - AL81953 suitable for John Deere tractorRubber Isolator.Suitable for 5020, 6000, 6005, 6010, and 6020 Series John Deere applications.Fits between engine and chassis rails.ID: 13.5mm.OD: 48mm.Note: On 6000 S... Show More£8.40 Inc VAT £7.00 Exc VATIn stockPart No.76197
Liners Engine Cyl
-
Liner C/W Seals suitable for John Deere tractor Finished Liner. Basic Specifications: Bore Dia 106.508 mm Height 196.930 mm. Comes with Sealing Rings. Wet Liner£33.60 Inc VAT £28.00 Exc VATIn stockPart No.1444
Liner Shims & ORings
-
Liner Seal Kit suitable for John Deere tractor Contains 3 Seals to Suit Liners 1444 & 1604£3.20 Inc VAT £2.67 Exc VATIn stockPart No.1450
Sump Gaskets
-
Sump Gasket suitable for John Deere tractor Sump Gasket£7.80 Inc VAT £6.50 Exc VATIn stockPart No.1610 -
Sump Gasket Paper suitable for John Deere tractor Paper Alternative to 1481 (Cork)£7.20 Inc VAT £6.00 Exc VATIn stockPart No.1483 -
Sump Gasket Cork suitable for John Deere tractor Cork Alternative to 1483 (Paper)£8.40 Inc VAT £7.00 Exc VATIn stockPart No.1481
Crankshafts
-
Crankshaft - RE20585 suitable for John Deere tractor Long nose for tractors with hydraulic pump driven of crank.Nose Length - 60mm.£474.00 Inc VAT £395.00 Exc VATIn stockPart No.72277 -
Crankshaft (Genmot) suitable for John Deere tractor Crankshaft (Genmot)Currently unavailablePart No.72278 -
Crankshaft (Genmot) suitable for John Deere tractor Crankshaft (Genmot)Currently unavailablePart No.72279
Conrod Bearings
-
Conrod Bearing Pair suitable for John Deere tractor Product is 1 Pair of Shells, + 0.030" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£4.20 Inc VAT £3.50 Exc VATIn stockPart No.1488C -
Conrod Bearing Pair suitable for John Deere tractor Product is 1 Pair of Shells, + 0.010" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£4.20 Inc VAT £3.50 Exc VATIn stockPart No.1488A -
Conrod Bearing Pair suitable for John Deere tractor Product is 1 Pair of Shells, STANDARD For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£5.40 Inc VAT £4.50 Exc VATIn stockPart No.1488 -
Conrod Bearing Pair suitable for John Deere tractor Product is 1 Pair of Shells, + 0.020" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£4.20 Inc VAT £3.50 Exc VATIn stockPart No.1488B
Main Bearings
-
Main Bearing Pair suitable for John Deere tractor Flanged Bearing With Intergrated Thrust - STD.£20.92 Inc VAT £17.43 Exc VATIn stockPart No.1486
Conrods
-
Conrod suitable for John Deere tractor *Serial Number Break Applies Please View Details*. John Deere. 2040S - From Serial Number 430000. 2650 - Suitable For Collar Shift Transmission Only. 3350 - Upto Serial Number For Spanish Built Models.Small End/Pin size ID: 34mm... Show More£66.00 Inc VAT £55.00 Exc VATIn stockPart No.1489
Conrod - RE16494 suitable for John Deere tractor Conrod.Small End/Pin size ID: 41mm.Big End ID: 73mm.Total Length: 280mm.Centre to Centre Length: 180mm.£39.60 Inc VAT £33.00 Exc VATIn stockPart No.76365Conrod Bushes
-
Small End Bush suitable for John Deere tractor Semi Finished. 41mm Piston Pin. Size when reamed Min/Max 41.300 - 41.330 mm£4.20 Inc VAT £3.50 Exc VATIn stockPart No.1463
Conrod Bolts & Nuts
-
Connecting Rod Bolt suitable for John Deere tractor 59mm Long. Note, some John Deere Connecting Rod Bolts were set at 54mm£4.20 Inc VAT £3.50 Exc VATOut of stockPart No.1491 -
Conrod Bolt - R74195 suitable for John Deere tractor Conrod BoltDimensions- Thread: 1/2UNF x 35- Overall Length: 74.80mm£4.03 Inc VAT £3.36 Exc VATIn stockPart No.75568
Ancillaries Crank
-
£58.91 Inc VAT £49.09 Exc VATIn stockPart No.75567
Gears Crank
-
£33.60 Inc VAT £28.00 Exc VATOut of stockPart No.1574
Crankshaft Seals
-
Front Crank Seal suitable for John Deere tractor Front Crank Seal£9.00 Inc VAT £7.50 Exc VATIn stockPart No.1460 -
Rear Crank Seal suitable for John Deere tractor Rear Crank Seal£21.60 Inc VAT £18.00 Exc VATIn stockPart No.1461
Pulleys
-
Fan Belt Tensioner Pulley suitable for John Deere tractor ID: 17mmOD: 70mmWidth: 35mmM10 Thread£21.60 Inc VAT £18.00 Exc VATIn stockPart No.75125
Camshaft
-
£134.40 Inc VAT £112.00 Exc VATOut of stockPart No.7586 -
Camshaft Bush R119874 suitable for John Deere tractor John Deere 4039T, 6359DOD: 60mmID: 56mmLength: 38.8mm£8.28 Inc VAT £6.90 Exc VATIn stockPart No.75573
Camshaft Followers
-
Push Rod suitable for John Deere tractor Push RodDimensions- Overall Length: 230mm- Diameter: 8.50mm£9.00 Inc VAT £7.50 Exc VATIn stockPart No.1503
Sump Engine
-
Sump Plug Washer suitable for John Deere tractor Price is Each (Per Washer)£2.99 Inc VAT £2.49 Exc VATOut of stockPart No.1506
Bottom Gasket Sets
-
£90.00 Inc VAT £75.00 Exc VATIn stockPart No.2552
Air Filters
-
Air Filter- Inner suitable for John Deere tractor Length: 131.8mm ID: 92.1mm. OD: 127.8mm. Flange Diameter: 198.4mm.Currently unavailablePart No.10211 -
Fleetguard AF1840 Inner Air Filter suitable for John Deere tractor Inner Air Filter
Tractor with Air Pre Cleaner
£38.05 Inc VAT £31.71 Exc VATOut of stockPart No.AF1840 -
Fleetguard AF1842 Inner Air Filter suitable for John Deere tractor Inner Air Filter£32.96 Inc VAT £27.47 Exc VATIn stockPart No.AF1842 -
Fleetguard AF25301 Inner Air Filter suitable for John Deere tractor Inner Air Filter£38.39 Inc VAT £31.99 Exc VATIn stockPart No.AF25301 -
Fleetguard AF25064 Outer Air Filter suitable for John Deere tractor Outer Air FilterDimensions:OD: 197.5mmID: 103.5mmLength: 376.2mm£37.74 Inc VAT £31.45 Exc VATIn stockPart No.AF25064 -
Fleetguard AF25300 Outer Air Filter suitable for John Deere tractor Outer Air Filter£66.00 Inc VAT £55.00 Exc VATIn stockPart No.AF25300 -
Fleetguard AF4058 Outer Air Filter suitable for John Deere tractor Outer Air FilterDimensionsOD: 163.6mmID: 86.4mmLength: 350.7mm£42.22 Inc VAT £35.18 Exc VATOut of stockPart No.AF4058
Oil Filters
-
Fleetguard LF678 Oil Filter suitable for John Deere tractor Overall height: 138mm, OD: 93mm, Thread size: 13/16 - 16 UNS-2B ,£9.60 Inc VAT £8.00 Exc VATOut of stockPart No.LF678 -
Oil Filter Spin On suitable for John Deere tractor Length: 136.7mm.Diameter: 94.1mm.£7.10 Inc VAT £5.92 Exc VATIn stockPart No.8493 -
Oil Filter suitable for John Deere tractor Engine oil filterProduct Info:- Height: 138mm- OD: 93mm- Thread Size: 13/16 - 16UNS - 2B£10.24 Inc VAT £8.53 Exc VATOut of stockPart No.77336
Fuel Filters
-
Secondary Fuel Filter suitable for John Deere tractor Water Separator Element with Drain. Used On Models With Single Fuel Filter.Out of stockPart No.10206 -
Fuel Filter 5 Micron Final Filter suitable for John Deere tractor Secondary Fuel/Water Coalescer Element with Drain.Currently unavailablePart No.1585 -
Fleetguard FS19831 Fuel Filter suitable for John Deere tractor Overall height: 135mm, OD: 84mm, Inside Ø - End 1: 17mm, Inside Ø - End 2: mm.£26.40 Inc VAT £22.00 Exc VATIn stockPart No.FS19831 -
Fleetguard FS19838 Fuel Filter suitable for John Deere tractor Overall height: 116mm, OD: 84mm, Inside Ø - End 1: 17mm, Inside Ø - End 2: mm.£23.12 Inc VAT £19.27 Exc VATIn stockPart No.FS19838 -
Fleetguard FS19861 Fuel Filter suitable for John Deere tractor Overall height: 155mm, OD: 84mm, Thread size: -,£23.22 Inc VAT £19.35 Exc VATIn stockPart No.FS19861 -
Fleetguard FS19840 Secondary Fuel Filter suitable for John Deere tractorFleetguard FS19840 fuel water separator cartridge filter works to remove water and other particulates and ensures clean fuel is delivered to your engine.Length: 173.00 mmLargest OD: 84.00 mmL... Show More£33.47 Inc VAT £27.89 Exc VATIn stockPart No.FS19840
Fuel Filter suitable for John Deere tractor Fuel FilterProduct Info:- Overall Height: 116mm- Outer Diameter: 84mm£16.80 Inc VAT £14.00 Exc VATOut of stockPart No.77388
Fuel Lift Pumps
-
Fuel Lift Pump w/ Glass Bowl suitable for John Deere tractor Fuel Lift Pump w/ Glass BowlGasket Included£23.99 Inc VAT £19.99 Exc VATIn stockPart No.55008 -
Fuel Lift Pump suitable for John Deere tractor Replacement for original Sofabex or Corona style Lift Pumps.Gasket Included£25.80 Inc VAT £21.50 Exc VATIn stockPart No.55016
Fuel Pumps Electric
-
Fuel Pump suitable for John Deere tractor Mounted In Tank. Stanadyne.£125.11 Inc VAT £104.26 Exc VATIn stockPart No.9477
Fuel Pipes
-
Tee Fitting - R71963 suitable for John Deere tractor Tee fitting for Injectors suitable for John Deere.Thread: M14.£10.80 Inc VAT £9.00 Exc VATIn stockPart No.76562
Fuel Injectors
-
Injector Line Seal suitable for John Deere tractor I/D Ø : 6.2mm
O/D Ø : 10.5mm
Height : 5.8mm£0.24 Inc VAT £0.20 Exc VATIn stockPart No.1512 -
Fuel Injector suitable for John Deere tractor Fuel InjectorInjector Nozzle marked with - 28485£58.80 Inc VAT £49.00 Exc VATIn stockPart No.9487A
Fuel Ancillaries
-
Lockable Fuel Cap suitable for John Deere tractor UK Made. Case/IH. 3200 Series - From Serial Number JJE0925810.
£17.94 Inc VAT £14.95 Exc VATIn stockPart No.50443 -
Fuel Shut Off Solenoid - RE22744 suitable for John Deere tractor Fuel Shut Off SolenoidFuel Thread OD: 13.7mm£21.60 Inc VAT £18.00 Exc VATOut of stockPart No.2074 -
Fuel Cap suitable for John Deere tractor UK Made. Male Thread£12.28 Inc VAT £10.23 Exc VATIn stockPart No.50442 -
Fuel Shut Off Solenoid suitable for John Deere tractor Fuel Shut Off Solenoid£21.00 Inc VAT £17.50 Exc VATOut of stockPart No.2073
Throttle Levers
-
Throttle Control Knob L112425 suitable for John Deere tractor Throttle Control Knob, redeveloped with a new tool exclusive to Agriline .£11.99 Inc VAT £9.99 Exc VATIn stockPart No.74743
Fuel Filter Housings
-
Fuel Filter Sediment Bowl - RE51650 suitable for John Deere tractor Fuel filter sediment bowl suitable for John DeereThread Size: M10 x 1.5OD: 80mm£34.80 Inc VAT £29.00 Exc VATIn stockPart No.76551 -
Final Fuel Filter Head - RE500160 suitable for John Deere tractor Final fuel filter headDimensionsWidth: 4"Length: 4.25"£40.80 Inc VAT £34.00 Exc VATIn stockPart No.76552
Filler Caps Oil
-
Oil Filler Cap with Dipstick suitable for John Deere tractor Oil Filler Cap with Dipstick£16.76 Inc VAT £13.97 Exc VATIn stockPart No.80133
Exhaust Pipe
-
Exhaust Lower Pipe suitable for John Deere tractor Suitable for corner post exhaust systems only.£35.40 Inc VAT £29.50 Exc VATOut of stockPart No.74659 -
Exhaust Pipe suitable for John Deere tractor Suitable for John Deere 6000 & 6010 Series.Currently unavailablePart No.74598
Silencer Pipe
-
Silencer suitable for John Deere tractorSilencer, RH side mountedDimensions- Inlet ID: 60.70mm- Exhaust OD: 64mm- Body Length: 245mm- Body Width: 175m... Show More£99.00 Inc VAT £82.50 Exc VATIn stockPart No.1624
Silencer Box suitable for John Deere tractor Exhaust Exits From Left Hand Side of Bonnet. Type: Underhood. Finish: Heat Resistant Black or galvanised£99.00 Inc VAT £82.50 Exc VATIn stockPart No.1649
Silencer Pipe suitable for John Deere tractor Mounted On The Left Hand Side. Length: 1000mm. Diameter: 64mm John Deere. 6100 - From Serial Number 143102. 6200 - From Serial Number 143102. 6300 - From Serial Number 143102. 6400 - From Serial Number 143102.£45.00 Inc VAT £37.50 Exc VATIn stockPart No.1633
Exhaust Pipe - L102557 suitable for John Deere tractor Exhaust pipe.In stockPart No.76664