John Deere 55 Series, Classic 2855 Electrical PARTS
Agriline Products Ltd stock a range of electrical tractor spare parts from many high quality manufacturers to suit John Deere 2855 tractors. In addition to this, Agriline also stock Lucas, MAHLE, Cobo and Lucas TVS parts. This includes Switches, Wiring, Starter Motors, Dynamos, Alternators, Gauges, Sensors, Tachometers, Lights, Bulbs and much more.
Starter Motors
-
Gear Reduction Starter Motor - 12V, 3.4Kw (Mahle) suitable for John Deere tractor Teeth: 10.
Tooth Pitch: 12.29mm.
Flange Ø: 82.5mm.
Mounting Angle: -45°.
Number Of Mounting Bores: 2.
Mounting Points Diameter: 105mm.
Bore Ø 1: 13.5mm.
Rotation Direction: Clockwise.
For Flywheel Depth: 38mm.
£307.38 Inc VAT £256.15 Exc VATOut of stockPart No.93031 -
Starter Motor - 12V, 2.7Kw (Mahle) suitable for John Deere tractor Teeth: 10
Tooth Pitch: 12.29mm
Flange Ø: 82.5mm
Mounting Angle: -45°
Number Of Mounting Bores: 2
Mounting Points Diameter: 105mm
Bore Ø 1: 13.5mm
Rotation Direction: Clockwise
For Flywheel Depth: 38mm
£355.36 Inc VAT £296.13 Exc VATIn stockPart No.93011 -
Gear Reduction Starter Motor - 12V, 3.2Kw - AL70850 suitable for John Deere tractorIskra PLGR Type Starter Motor.12V. 10 Teeth. 3.2kw.£138.00 Inc VAT £115.00 Exc VATOut of stockPart No.77307
Alternator
-
Alternator (Less Pulley) 14V, 70 Amps suitable for John Deere tractor For pulley use Agriline Ref. 81281.
These alternators have a built in regulator, if your old alternator has a external regulator with plug then this will need cutting off and loop crimp ends fitted; Alternator terminals are lettered to match old A... Show More£154.75 Inc VAT £128.96 Exc VATIn stockPart No.50452
Alternator Pulley
-
Alternator Pulley suitable for John Deere tractor For use with Alternator Agriline Ref. 50452.
Bore: 176mm.
Outer Diameter: 92mm.
To Fit Belt (Top Edge) Width: 17mm.£24.00 Inc VAT £20.00 Exc VATIn stockPart No.81281
Oil Pressure Switch
-
Oil Pressure Switch suitable for John Deere tractor Oil Pressure Switch£10.74 Inc VAT £8.95 Exc VATIn stockPart No.1568
Beacons
-
Beacon Bracket suitable for John Deere tractor Supplied with weather rubber cap for when beacon not in place.
Anodised plating for weather resistance.
Pin Height: 100mm.
Fixing Slots: 11mm x 22mm,
Fixing Slots Centre to Centre: 80mm.
£9.35 Inc VAT £7.79 Exc VATIn stockPart No.8452 -
Beacon Bracket suitable for John Deere tractor Supplied with weather rubber cap for when beacon not in place.
Anodised plating for weather resistance.
Pin Height: 100mm.
Fixing Slots: 11mm x 22mm,
Fixing Slots Centre to Centre: 55mm.
£8.39 Inc VAT £6.99 Exc VATIn stockPart No.8451 -
Beacon Bracket suitable for John Deere tractor Supplied with weather rubber cap for when beacon not in place.
Anodised plating for weather resistance.
Pin Height: 95mm.
Fixing Hole : 8mm
Fixing Holes Centre to Centre: 38mm.£9.35 Inc VAT £7.79 Exc VATIn stockPart No.8450 -
Rotating Warning Beacon suitable for John Deere tractor Flexible Stem.
Pin Fitting : 24mm.
Overall Height: 315mm.
Diameter: 127mm.
12V H1 Halogen Bulb.
Impact Resistant Lens.
Operating Temperature -30° to 50°.
E Approved.
Replacement Bulb - Agriline Ref: 9368Currently unavailablePart No.A-186 -
Rotating Warning Beacon suitable for John Deere tractor For Negative Earth Tractors
Fixed Pin Fitting.
Pin Fitting : 24mm.
Overall Height: 60mm.
Diameter: 125mm.
12V H1 Halogen Bulb.12V / 55W , 24V / 70W.
Impact Resistant Lens.
CE Approved.
Replacement Bulb - Agriline Ref: 9368<... Show More£25.98 Inc VAT £21.65 Exc VATIn stockPart No.54028