John Deere 50 Series, Classic 3650 Engine PARTS
We stock a wide range of high quality replacement tractor engine spare parts to suit John Deere 3650 tractors. All parts come with an 18 months warranty. Our range includes; cylinder heads, gaskets, valves, engines, blocks, pistons, liners, piston rings, Seals, engine overhaul Kits, fuel pumps, oil pumps, crankshafts, engine bearings, oil filters, fuel filters, fuel pipes, manifolds, silencers and much more.
Cylinder Head Gasket
-
Head Gasket suitable for John Deere tractor Head Gasket£19.20 Inc VAT £16.00 Exc VATIn stockPart No.1476 -
Head Gasket Set suitable for John Deere tractor Supplied with Cork Rocker Cover Gasket and without Valve Seals.£37.80 Inc VAT £31.50 Exc VATIn stockPart No.1455
Rocker Cover Gaskets
-
Rocker Cover Gasket suitable for John Deere tractor Rocker Cover Gasket£7.08 Inc VAT £5.90 Exc VATIn stockPart No.1479
Valves Engine
-
Exhaust Valve STD suitable for John Deere tractor Standard SizeValve Angle = 45 Degrees
Show More£7.80 Inc VAT £6.50 Exc VATIn stockPart No.1493
Inlet Valve + 0.015 suitable for John Deere tractor + 0.015" Oversize£6.00 Inc VAT £5.00 Exc VATIn stockPart No.1494A
Exhaust Valve + 0.015 suitable for John Deere tractor + 0.015" Oversize£8.86 Inc VAT £7.38 Exc VATIn stockPart No.1493A
Inlet Valve STD suitable for John Deere tractor Inlet Valve STD£6.00 Inc VAT £5.00 Exc VATIn stockPart No.1494
Valve Springs
-
Valve Spring suitable for John Deere tractor Valve Spring, can be used with both INLET and EXHAUST valve.Overall length - 55cmOverall diameter - 35mm£4.32 Inc VAT £3.60 Exc VATIn stockPart No.1495
Valve Collets
-
Valve Collet suitable for John Deere tractor Valve Collet£1.44 Inc VAT £1.20 Exc VATOut of stockPart No.81254 -
Valve Collet (Pair) suitable for John Deere tractor Valve Collet (pair)£1.50 Inc VAT £1.25 Exc VATIn stockPart No.7407
Valve Ancillaries
-
Valve Tappet suitable for John Deere tractor Valve Tappet£7.20 Inc VAT £6.00 Exc VATIn stockPart No.1502 -
Valve Stem Cap suitable for John Deere tractor Valve Stem CapOD: 13mmID: 9.4mmThickness: 6mm£3.60 Inc VAT £3.00 Exc VATIn stockPart No.1496
Rocker Components
-
Rocker Arm suitable for John Deere tractor Rocker Arm£16.80 Inc VAT £14.00 Exc VATOut of stockPart No.1501
Studs Cylinder Head
-
Cylinder Head Stud (Pack of 9) suitable for John Deere tractor 1/2" UNC, 9 Studs Per Pack.
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4. Rotate bolt a further 60 Degrees£22.80 Inc VAT £19.00 Exc VATIn stockPart No.1464 -
Cylinder Head Stud - 112MM suitable for John Deere tractor 1/2" UNC 112MM
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4.Then Rotate bolt a further 60 Degrees£10.91 Inc VAT £9.09 Exc VATIn stockPart No.1464A
Engine Kits
-
Engine Overhaul Kit suitable for John Deere tractor Consists of; 6 x Piston, Pin & Clips 6 x Piston Ring Set 6 x Liner c/w Seals 1 x Complete Gasket Set 1 x Front Crank Seal (59mm x 76.5mm x 10mm) 1 x Rear Crank Seal (118mm x 146.1mm x 12.7mm) 6 x Small End Bush- 41mm Piston Pin 3 x Cylind... Show More£522.50 Inc VAT £435.42 Exc VATIn stockPart No.1473
Oil Cooler
-
Oil Cooler suitable for John Deere tractor 1140 - From Serial Number 704046. 2850 - From Serial Number 795107. 3200 - From Serial Number 189846. 3300 - From Serial Number 189846. 3400 - From Serial Number 189846.£93.60 Inc VAT £78.00 Exc VATIn stockPart No.8089 -
Oil Cooler suitable for John Deere tractor 1040 - Upto Serial Number 704045. 1140 - Upto Serial Number 704045. 2150 - From Serial Number 704045. 2850 - Upto Serial Number 795106.£123.60 Inc VAT £103.00 Exc VATIn stockPart No.8066
Oil Pumps
-
Engine Oil Pump Pipe suitable for John Deere tractor Engine Oil Pump PipeOD: 15.60mm£21.60 Inc VAT £18.00 Exc VATIn stockPart No.81246 -
Oil Pump Assembly suitable for John Deere tractor 3 Bolt fixing with modification Pipes to suit Pumps that were originally 4 Bolt£137.28 Inc VAT £114.40 Exc VATIn stockPart No.1505 -
Oil Pump Assembly suitable for John Deere tractor Later version Oil Pump with 4 Bolt Holes£59.88 Inc VAT £49.90 Exc VATOut of stockPart No.1504 -
£123.38 Inc VAT £102.82 Exc VATOut of stockPart No.75571
Piston Engine
-
Piston, Ring & Liner Kit suitable for John Deere tractor Includes Liner O-Rings.£86.40 Inc VAT £72.00 Exc VATIn stockPart No.1446 -
Piston, Pin & Clips suitable for John Deere tractor Crown diameter; 104.750mm.Skirt diameter: 106.390mm.Compression height: 66.300mm.Overall height: 111.970mm.Chamber diameter: 58.420mm.Chamber depth: 18.620mm.Pi... Show More£39.60 Inc VAT £33.00 Exc VATIn stockPart No.1445
Piston Rings Engine
-
Piston Ring Set - DD11831 suitable for John Deere tractor No. of Rings = 3 (2.97 x 2.36 x 3.45)Please note - These are Agriline brand for the Federal Mogul equivalent please order part number 1443FM.£18.00 Inc VAT £15.00 Exc VATIn stockPart No.1443 -
Piston Ring Set, Federal Mogul Brand - DD11831 suitable for John Deere tractor No. of Rings: 3 (2.97 x 2.36 x 3.45)Please note: These are Federal Mogul brand; for the Agriline equivalent please order part number 1443.£25.68 Inc VAT £21.40 Exc VATIn stockPart No.1443FM
Liners Engine Cyl
-
Liner C/W Seals suitable for John Deere tractor Finished Liner. Basic Specifications: Bore Dia 106.508 mm Height 196.930 mm. Comes with Sealing Rings. Wet Liner£33.60 Inc VAT £28.00 Exc VATIn stockPart No.1444
Liner Shims & ORings
-
Liner Seal Kit suitable for John Deere tractor Contains 3 Seals to Suit Liners 1444 & 1604£3.20 Inc VAT £2.67 Exc VATIn stockPart No.1450
Sump Gaskets
-
Paper Gasket suitable for John Deere tractor Paper GasketFor cork version please order Agriline part number 76348.£10.80 Inc VAT £9.00 Exc VATIn stockPart No.1482 -
Cork Sump Gasket suitable for John Deere tractor Cork sump gasket.For Paper gasket, please order Agriline Part No. 1482.£7.20 Inc VAT £6.00 Exc VATIn stockPart No.76348
Crankshafts
-
Crankshaft 6303D 6329D 6359D 6359T suitable for John Deere tractor CrankshaftJohn Deere Tractor Engines 6303D, 6329D, 6359D, 6359T.Mains: 3.1235"/3.124"Conrods: 2.7485"/2.749"Stroke: 4.330"Show More £778.80 Inc VAT £649.00 Exc VATOut of stockPart No.8460
Conrod Bearings
-
Conrod Bearing Pair suitable for John Deere tractor Product is 1 Pair of Shells, + 0.030" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£4.20 Inc VAT £3.50 Exc VATIn stockPart No.1488C -
Conrod Bearing Pair suitable for John Deere tractor Product is 1 Pair of Shells, + 0.010" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£4.20 Inc VAT £3.50 Exc VATIn stockPart No.1488A -
Conrod Bearing Pair suitable for John Deere tractor Product is 1 Pair of Shells, STANDARD For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£5.40 Inc VAT £4.50 Exc VATIn stockPart No.1488 -
Conrod Bearing Pair suitable for John Deere tractor Product is 1 Pair of Shells, + 0.020" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£4.20 Inc VAT £3.50 Exc VATIn stockPart No.1488B
Main Bearings
-
£68.40 Inc VAT £57.00 Exc VATIn stockPart No.1487 -
Main Bearing Pair suitable for John Deere tractor Flanged Bearing With Intergrated Thrust - STD.£20.92 Inc VAT £17.43 Exc VATIn stockPart No.1486 -
Currently unavailablePart No.1487C -
Currently unavailablePart No.1487A -
Main Bearing Set suitable for John Deere tractor Main Bearing Set +0.020" - John Deere AT21134, RE27360£30.76 Inc VAT £25.63 Exc VATIn stockPart No.1487B
Conrods
-
Conrod - RE16494 suitable for John Deere tractor Conrod.Small End/Pin size ID: 41mm.Big End ID: 73mm.Total Length: 280mm.Centre to Centre Length: 180mm.£39.60 Inc VAT £33.00 Exc VATIn stockPart No.76365
Conrod Bushes
-
Small End Bush suitable for John Deere tractor Semi Finished. 41mm Piston Pin. Size when reamed Min/Max 41.300 - 41.330 mm£4.20 Inc VAT £3.50 Exc VATIn stockPart No.1463
Conrod Bolts & Nuts
-
Connecting Rod Bolt suitable for John Deere tractor 59mm Long. Note, some John Deere Connecting Rod Bolts were set at 54mm£4.20 Inc VAT £3.50 Exc VATOut of stockPart No.1491
Ancillaries Crank
-
£58.91 Inc VAT £49.09 Exc VATIn stockPart No.75567
Gears Crank
-
£33.60 Inc VAT £28.00 Exc VATOut of stockPart No.1574
Crankshaft Seals
-
Front Crank Seal suitable for John Deere tractor Front Crank Seal£9.00 Inc VAT £7.50 Exc VATIn stockPart No.1460 -
Rear Crank Seal suitable for John Deere tractor Rear Crank Seal£21.60 Inc VAT £18.00 Exc VATIn stockPart No.1461
Fly Wheel
-
Fly Wheel suitable for John Deere tractor For Clutch 330mm Diameter With 142 Teeth£174.00 Inc VAT £145.00 Exc VATIn stockPart No.72551
Camshaft Followers
-
Push Rod suitable for John Deere tractor Push RodDimensions- Overall Length: 230mm- Diameter: 8.50mm£9.00 Inc VAT £7.50 Exc VATIn stockPart No.1503
Sump Engine
-
Sump Plug Washer suitable for John Deere tractor Price is Each (Per Washer)£2.99 Inc VAT £2.49 Exc VATOut of stockPart No.1506
Bottom Gasket Sets
-
£36.60 Inc VAT £30.50 Exc VATIn stockPart No.1456
Air Intake
-
Air Intake Manifold suitable for John Deere tractor Air Intake Manifold£162.00 Inc VAT £135.00 Exc VATIn stockPart No.72524 -
Air Intake Manifold Elbow suitable for John Deere tractor Air Intake Manifold Elbow£118.80 Inc VAT £99.00 Exc VATIn stockPart No.72317
Air Cleaners
-
Pre Cleaner suitable for John Deere tractor Inlet: 76mm (3"). Bowl: 178mm (7").£14.27 Inc VAT £11.89 Exc VATIn stockPart No.2245 -
Air Pre-Cleaner - AZ24175 suitable for John Deere tractorAir pre cleaner suitable for Ford John Deere and David Brown TractorsInlet: 76mm.
Bowl: 270mm/10"£35.99 Inc VAT £29.99 Exc VATOut of stockPart No.9993 -
Air Pre-Cleaner Bowl - C9NN9A663A suitable for John Deere tractor Air Pre-CleanerDimensionsDiameter: 254mm£4.56 Inc VAT £3.80 Exc VATOut of stockPart No.77033
Air Filters
-
Air Filter- Inner suitable for John Deere tractor Length: 230mm OD: 102mm£103.46 Inc VAT £86.22 Exc VATIn stockPart No.1530 -
Air Filter- Outer suitable for John Deere tractor O.D: 198mm.
I.D: 103mm.
Length: 376mm.
Tractors With Pre Cleaner
Currently unavailablePart No.10132 -
Fleetguard AF25064 Outer Air Filter suitable for John Deere tractor Outer Air FilterDimensions:OD: 197.5mmID: 103.5mmLength: 376.2mm£37.74 Inc VAT £31.45 Exc VATIn stockPart No.AF25064
Oil Filters
-
Fleetguard LF678 Oil Filter suitable for John Deere tractor Overall height: 138mm, OD: 93mm, Thread size: 13/16 - 16 UNS-2B ,£10.24 Inc VAT £8.53 Exc VATOut of stockPart No.LF678 -
Oil Filter Spin On suitable for John Deere tractor Length: 136.7mm.Diameter: 94.1mm.£7.10 Inc VAT £5.92 Exc VATIn stockPart No.8493 -
Oil Filter suitable for John Deere tractor Engine oil filterProduct Info:- Height: 138mm- OD: 93mm- Thread Size: 13/16 - 16UNS - 2B£10.24 Inc VAT £8.53 Exc VATOut of stockPart No.77336
Fuel Filters
-
Fuel Filter suitable for John Deere tractor Glass Fuel Filter- 3 Port- Overall Length: 126.5mm- Overall Width: 94mm- Overall Height: 80mm£21.10 Inc VAT £17.58 Exc VATIn stockPart No.8494 -
£23.27 Inc VAT £19.39 Exc VATIn stockPart No.FF203 -
Fleetguard FF5705 Fuel Filter suitable for John Deere tractor Fuel Filter8mm Fitting DiameterIn stockPart No.FF5705 -
Inline Fuel Filter - AL78988 suitable for John Deere tractor Inline Fuel Filter8mm Hose Fitting.Overall Length: 101mm£3.90 Inc VAT £3.25 Exc VATIn stockPart No.76922
Filter Kits
-
Filter Service Kit suitable for John Deere tractor 373mm Inner Air Filter& 375mm Outer Air Filter. Contains: 1 x Oil Filter Spin On. 1 x Fuel Filter. 1 x Outer Air Filter. 1 x Inner Air Filter.£97.57 Inc VAT £81.31 Exc VATOut of stockPart No.FSK-905 -
Air Filter Kit suitable for John Deere tractor Air Filter Kit suitable for John Deere 50 Series.Contains:Outer Air Filter (Length: 376.2mm).Inner Air Filter (Length: 230mm).£141.20 Inc VAT £117.67 Exc VATIn stockPart No.FSK-5016
Fuel Lift Pumps
-
Fuel Lift Pump suitable for John Deere tractor Sofabex Version Lift Pump, Replaces plastic cap version.Gasket Included£27.00 Inc VAT £22.50 Exc VATIn stockPart No.1508 -
Fuel Lift Pump suitable for John Deere tractor Replacement for original Sofabex or Corona style Lift Pumps.Gasket Included£25.80 Inc VAT £21.50 Exc VATIn stockPart No.55016
Fuel Injectors
-
Injector Line Seal suitable for John Deere tractor I/D Ø : 6.2mm
O/D Ø : 10.5mm
Height : 5.8mm£0.24 Inc VAT £0.20 Exc VATIn stockPart No.1512 -
Fuel Injector suitable for John Deere tractor Fuel InjectorStanadyne brand, for Agriline brand please order 76118£74.40 Inc VAT £62.00 Exc VATOut of stockPart No.1511 -
Injector Seal - R79605 suitable for John Deere tractor Tee Fitting Washer.Seals the top of the fuel injector to the T fitting,One Required per injector, supplied as singles- OD: 13mm- ID: 9mm&n... Show More£1.08 Inc VAT £0.90 Exc VATIn stockPart No.1513
Fuel Injector suitable for John Deere tractor Fuel Injector£45.60 Inc VAT £38.00 Exc VATIn stockPart No.76204
Fuel Injector - RE31757 suitable for John Deere tractor Fuel Injector.This Is An Agriline Brand Injector, Agriline Also Supply A Stanadyne Branded Version Of this Injector, Which Is Agriline Part Number 1511, This Can Be Found Within The Related Items Section Opposite.£51.00 Inc VAT £42.50 Exc VATIn stockPart No.76118Fuel Pump Repair Kit
-
Fuel Lift Pump Repair Kit suitable for John Deere tractor Repairs Fuel Lift Pump 1508£13.20 Inc VAT £11.00 Exc VATIn stockPart No.1509
Fuel Ancillaries
-
Fuel Cap suitable for John Deere tractor Suitable for plastic tank.
£7.61 Inc VAT £6.34 Exc VATOut of stockPart No.80134 -
£4.20 Inc VAT £3.50 Exc VATIn stockPart No.5424
Exhaust Manifold
-
Exhaust Manifold suitable for John Deere tractor Exhaust Manifold£234.00 Inc VAT £195.00 Exc VATIn stockPart No.72249
Gaskets Manifold
-
Exhaust Manifold Gasket suitable for John Deere tractor Exhaust Manifold Gasket£2.40 Inc VAT £2.00 Exc VATIn stockPart No.1507
Silencer Pipe
-
Silencer Pipe suitable for John Deere tractor Length: 1330mm. Diameter: 78mm.£53.70 Inc VAT £44.75 Exc VATIn stockPart No.1654 -
Silencer Pipe suitable for John Deere tractor Length: 1280mm Inner Collar Diameter: 75mm.£45.00 Inc VAT £37.50 Exc VATOut of stockPart No.1598 -
Silencer Pipe suitable for John Deere tractor Length:1050mm. Diameter: 74mm.£45.00 Inc VAT £37.50 Exc VATOut of stockPart No.1575 -
Silencer suitable for John Deere tractor Type: Underhood. Finish: Self Colour. Fitting Dia 76 - 83mm. Overall Length: 36cm. Silencer Length: 36cm. Silencer Dia 2cm. Turbo Models Only.£141.00 Inc VAT £117.50 Exc VATOut of stockPart No.1523 -
Silencer Pipe suitable for John Deere tractor Overall Length: 1085mm. Inner Collar Diameter: 75mm.£45.00 Inc VAT £37.50 Exc VATOut of stockPart No.1596