John Deere 40 Series, Classic 1840 Front Axle & Steering PARTS
Our range of steering and axle parts for John Deere 1840 tractors will get you heading in the right direction. Robust original quality steering joints and track rod ends are stocked along with kingpins, spindles, wheel bearings, axle seals, bushes, bearings, wheel hubs, repair kits, wheel nuts, power steering pumps, orbital units, hoses, steering boxes, seal kits, drive shafts, wheels and tyres.
Tie Rod & Steering Joint 4WD
-
Track Rod End - AL32866 suitable for John Deere tractor Track Rod EndSuitable for John DeereIn stockPart No.76774 -
Track Rod End - AL32867 suitable for John Deere tractor Track Rod EndSuitable for John DeereIn stockPart No.76776
Track & Drag Ends
-
Track Rod End suitable for John Deere tractorTrack Rod End- Lock Nut Thread Length (A): 34mm- Taper Diameter (B - C): From 20mm – 20.2mm- Outer Thread Diameter (D): 22mm- Effective length (E): 332mmSuppl... Show More£33.60 Inc VAT £28.00 Exc VATOut of stockPart No.50516
Track Rod End suitable for John Deere tractorTRACK ROD END- Lock Nut Thread Length (A): 19mm- Taper Diameter (B - C): From 19.9mm – 22.3mm- Outer Thread Diameter (D): 24mm- Effective length (E): 95mm- Thread Size... Show More£25.20 Inc VAT £21.00 Exc VATIn stockPart No.50517Track Rods
-
Track Rod Assembly suitable for John Deere tractor Track Rod Assembly- Lock Nut Thread Length (A): 17.8mm- Taper Diameter (B - C): From 19.9mm – 22.3mm- Effective Length (D): 440mm- Outer Diameter (E): 30mmSupplied with Nut(s).Show More£91.20 Inc VAT £76.00 Exc VATIn stockPart No.50515
Axle Pivot Pins
-
Axle Pin suitable for John Deere tractor 40mm x 94mm£27.00 Inc VAT £22.50 Exc VATOut of stockPart No.74317
Axle Pivot Bush
-
Front Axle Bush suitable for John Deere tractor OD: 45mmID: 40mmWidth: 38mmHole: 6.15mm£15.00 Inc VAT £12.50 Exc VATIn stockPart No.74998
Axle Pin Subcom
-
Split Cotter Pin (20 Pack) suitable for John Deere tractor OD - 4mmWorking Length - 40mm£2.28 Inc VAT £1.90 Exc VATIn stockPart No.5716
Spindles
-
Spindle LH / RH suitable for John Deere tractor Shaft Length: 380mm.
Shaft Diameter: 38mm.£102.00 Inc VAT £85.00 Exc VATOut of stockPart No.74559 -
Spindle LH / RH suitable for John Deere tractor Shaft Length: 375mm.
Shaft Diameter: 44.5mm.£98.18 Inc VAT £81.82 Exc VATOut of stockPart No.74583
Spindle Repair Kits
-
Spindle Repair Kit suitable for John Deere tractor
For 38mm Spindles
£23.94 Inc VAT £19.95 Exc VATIn stockPart No.74225
Spindle Components
-
Bearing- 37.65 x 55.96 x 16.25mm suitable for John Deere tractor Bearing ID - 37.65 mm OD - 55.96 mm Width - 16.25 mm£6.18 Inc VAT £5.15 Exc VATIn stockPart No.52003 -
Spindle Bearing - 483253C92 suitable for John Deere tractor ID: 38mm.OD: 66mm.Width: 19.50mm.£13.20 Inc VAT £11.00 Exc VATIn stockPart No.76281 -
Hexagonal Nut - M12 - 14M7154 suitable for John Deere tractor Hexagonal Nut.Thread: 12mm (M12).Width: 19mm.Thread Pitch: 1.75mm.Thickness: 7mm.£1.03 Inc VAT £0.86 Exc VATOut of stockPart No.001-147154 -
Cotter Pin - 11M7030 suitable for John Deere tractor Cotter PinDimensionsDiameter: 5mmLength: 40mm£0.24 Inc VAT £0.20 Exc VATOut of stockPart No.001-117030
Steering Arm Components
-
John Deere Steering Arm Shaft suitable for John Deere tractor Pin For Top Arm£33.60 Inc VAT £28.00 Exc VATIn stockPart No.74446 -
Steering Arm Bush suitable for John Deere tractor 32mm x 37mm x 38mm
£3.65 Inc VAT £3.04 Exc VATIn stockPart No.74868
Wheel Hubs
-
Wheel Hub with Studs suitable for John Deere tractor Requires Wheel Bearing Kit, Agriline Ref. 1540.
Wheel Bearing Hole Diameter, Axle End: 90mm.
Wheel Bearing Hole Diameter, Hub Cap End: 68mm.£56.40 Inc VAT £47.00 Exc VATIn stockPart No.1551A -
£178.80 Inc VAT £149.00 Exc VATIn stockPart No.74316 -
Axle Hub Housing LH suitable for John Deere tractor Axle Hub Housing LHDimensions- Overall Height: 220mm- ID: 115mm- Upper / Lower Thread ID: 48.7mm- Track rod taper ... Show More£178.80 Inc VAT £149.00 Exc VATIn stockPart No.74315
Wheel Bearings
-
Outer Wheel Bearing suitable for John Deere tractor 2WD Axle. 33.20mm x 68.20mm£11.88 Inc VAT £9.90 Exc VATIn stockPart No.9307 -
Wheel Bearing Kit suitable for John Deere tractor
For Hubs With Bolt On Hub Cap
£23.99 Inc VAT £19.99 Exc VATOut of stockPart No.1540 -
Taper Roller Bearing - JD7445 suitable for John Deere tractor Taper roller BearingDimensionsID: 45.618mmOD: 83.058mmWidth: 25.4mm£19.20 Inc VAT £16.00 Exc VATIn stockPart No.76302 -
Taper Roller Bearing - JD10137 suitable for John Deere tractor Taper roller bearing.DimensionsID: 35mmOD: 62mmWidth: 18mm£10.80 Inc VAT £9.00 Exc VATIn stockPart No.76304
Front Wheel Studs
-
Wheel Stud suitable for John Deere tractor Thread: 9/16" UNF.
Thread Length: 1. 1/2".
Overall Length: 2".
£2.70 Inc VAT £2.25 Exc VATIn stockPart No.80195
Hub Caps
-
Hub Cap suitable for John Deere tractor Hub CapDimensions- 3 Bolt Fixing- Bolt Hole: 8.20mm- Distance between centres: 80mm- Grease nipple thread: 3/8UNF£17.99 Inc VAT £14.99 Exc VATIn stockPart No.74319
Hub Components
-
Hub Oil Seal suitable for John Deere tractor OD: 89.6mm.
ID: 60.16mm.
Width: 6mm.£4.20 Inc VAT £3.50 Exc VATOut of stockPart No.74562 -
Wheel Hub Gasket suitable for John Deere tractor
3 Bolt Fixing
£2.88 Inc VAT £2.40 Exc VATOut of stockPart No.74250 -
Wheel Hub Retainer suitable for John Deere tractor
OD - 90mm
ID - 80.8mm
£5.10 Inc VAT £4.25 Exc VATIn stockPart No.74249 -
Ring Gear suitable for John Deere tractor 4WD ZF Axle APL 325.
114 Teeth
183mm x 207mm x 43mm
£222.54 Inc VAT £185.45 Exc VATOut of stockPart No.74348 -
Annular Gear - L35599 suitable for John Deere tractor Annular gear.DimensionsOD - 188mmID - 161/170mmHeight - 46mmTeeth - 72£87.60 Inc VAT £73.00 Exc VATOut of stockPart No.76392
Steering Units
-
Orbital Steering Unit - AL41631 suitable for John Deere tractor Orbital steering unit.Hole Spacing: 44mm.Hole Diameter: 28mm.Length: 135mm.Max Pressure: 20 bar.Number of teeth: 12.Top port thread size: M18 x 1.5.&nb... Show More£189.60 Inc VAT £158.00 Exc VATOut of stockPart No.76707
Steering Wheels
-
Steering Wheel suitable for John Deere tractorSteering WheelDimensions- OD: 425mm- Dish: 130mm- Splined Centre (ID : 22.50mm)£19.80 Inc VAT £16.50 Exc VATIn stockPart No.1642
Steering Wheel Acc
-
Steering Wheel Woodruff Key suitable for John Deere tractor Steering Wheel Woodruff Key£1.20 Inc VAT £1.00 Exc VATIn stockPart No.5800
Power Steering Repair Kits
-
£19.80 Inc VAT £16.50 Exc VATIn stockPart No.6342
Power Steering Kits
-
Power Steering Cylinder suitable for John Deere tractor 2WD Models Without Cab.
The Brake system must be fully flushed with new clean fluid to remove any residual contaminants that may be left in the system.
Warranty shall not be accepted for damaged seals due to contamination.£714.00 Inc VAT £595.00 Exc VATIn stockPart No.6377
Power Steering Ram
-
Power Steering Cylinder suitable for John Deere tractor 2WD Models Without Cab.
The Brake system must be fully flushed with new clean fluid to remove any residual contaminants that may be left in the system.
Warranty shall not be accepted for damaged seals due to contamination.£714.00 Inc VAT £595.00 Exc VATIn stockPart No.6377
Power Steering Ram Repair Kits
-
£41.99 Inc VAT £34.99 Exc VATIn stockPart No.74220
4WD Driveshaft
-
Universal Joint- Driveshaft (27MM X 70.50MM) suitable for John Deere tractorUniversal JointShow More£22.50 Inc VAT £18.75 Exc VATOut of stockPart No.80075
4WD Axle
-
4WD Yoke Assembly suitable for John Deere tractor 4WD Yoke Assembly For APL325 Axle.Out of stockPart No.6521 -
Internal Snap Ring - 40M7115 suitable for John Deere tractorGenuine John Deere Snap RingDimensionsOD: 85.50mmID: 80mmWidth: 2.50mm£1.50 Inc VAT £1.25 Exc VATOut of stockPart No.001-407115