John Deere 40 Series, Classic 1640 Front Axle & Steering PARTS
Our range of steering and axle parts for John Deere 1640 tractors will get you heading in the right direction. Robust original quality steering joints and track rod ends are stocked along with kingpins, spindles, wheel bearings, axle seals, bushes, bearings, wheel hubs, repair kits, wheel nuts, power steering pumps, orbital units, hoses, steering boxes, seal kits, drive shafts, wheels and tyres.
Front Mudguard
-
Front Mudguard Kit suitable for John Deere tractor Front Mudguard Kit,Suitable for a wide range of John Deere tractors.Note that this kit secures onto the tractors original mudguard casting (see images). If your machine is missing this part then please or... Show More£330.00 Inc VAT £275.00 Exc VATOut of stockPart No.76185
Front Mudguard Kit suitable for John Deere tractorFront Mudguard Kit,Suitable for a wide range of John Deere tractors.Note that if you machine already has the cast bracket mount installed yon can use Agriline Kit 76185Show More Out of stockPart No.76187
Wheel Rims
-
Wheel Rim 4.50 x 16 suitable for John Deere tractorFits tyre size - 6.00 x 16.For best fit use with Agriline tyre ref. T-002 6.00 x 16 and inner tube ref. T-006.Agriline wheels are manufactured to a high degree of accuracy on high speed and high... Show More£34.80 Inc VAT £29.00 Exc VATIn stockPart No.2162Tyres
-
Tyre 6.00 - 16 (3 Rib) suitable for John Deere tractorT-002 is an 8 ply, 3 rib pattern front tyre; widely found on many vintage and classic 2WD farm tractors such as John Deere, David Brown, Ferguson, Fordson, Massey Ferguson, Ford, and Case International.Fits rim size 4.50... Show More£57.00 Inc VAT £47.50 Exc VATIn stockPart No.T-002
Tyre 7.50 - 16 (3 Rib) suitable for John Deere tractor Front 2WD tyre. Brand: ATF. 8 Ply.
Use With 2240 Rim And T-007 Inner Tube£71.99 Inc VAT £59.99 Exc VATIn stockPart No.T-003Inner Tubes
-
Inner Tube- Front 6.00 x 16 suitable for John Deere tractor Use with T-002 Tyre.
Use With 2162 Rim And T-006 Tyre
£11.99 Inc VAT £9.99 Exc VATIn stockPart No.T-006 -
Inner Tube- Front 7.50 x 16 suitable for John Deere tractor Use with T-003 Tyre.£15.00 Inc VAT £12.50 Exc VATIn stockPart No.T-007
Wheel & Tyre Assemblies
-
Wheel & Tyre Assembly 5.50 x 16 (7.50 x 16 Goodyear Tyre) suitable for John Deere tractor Contains: Wheel Rim (5.50 x 16) x 1 Tyre - Front Goodyear (7.50 x 16) x 1 Inner Tube (7.50 x16) x 1 Supplied fully assembled - finished in undercoat£210.00 Inc VAT £175.00 Exc VATIn stockPart No.22010 -
Wheel Rim 5.50 x 16 suitable for John Deere tractorFits tyre size - 7.50 x 16.For best fit use with Agriline tyre ref. T-003 7.50 x 16 and inner tube ref. T-007.Agriline wheels are manufactured to a high degree of accuracy on high speed and high... Show More£34.80 Inc VAT £29.00 Exc VATIn stockPart No.2240
Wheel & Tyre Assembly 5.50 x 16 (7.50 x 16 Tyre) suitable for John Deere tractorAgriline will handle the hard work for you, saving you the time and effort of assembling your own wheels, or the expense and inconvenience of hiring a fitter. Our team of expert fitters build Agriline wheel assemblies in-house.Show More £106.80 Inc VAT £89.00 Exc VATOut of stockPart No.22002Track & Drag Ends
-
Track Rod End suitable for John Deere tractorTrack Rod End- Lock Nut Thread Length (A): 34mm- Taper Diameter (B - C): From 20mm – 20.2mm- Outer Thread Diameter (D): 22mm- Effective length (E): 332mmSuppl... Show More£33.60 Inc VAT £28.00 Exc VATIn stockPart No.50516
Track Rod End suitable for John Deere tractorTrack Rod End- Lock Nut Thread Length (A): 26.6mm- Taper Diameter (B - C): From 16.2mm – 18.7mm- Outer Diameter (D): 36mm- Effective length (E): 148mm- Internal Thread Size ... Show More£42.00 Inc VAT £35.00 Exc VATIn stockPart No.50509
Track Rod End suitable for John Deere tractorTrack Rod End- Lock Nut Thread Length (A): 26.6mm- Taper Diameter (B - C): From 16.2mm – 18.7mm- Outer Thread Diameter (D): 20mm- Effective length (E): 370mmSupplied wit... Show More£34.80 Inc VAT £29.00 Exc VATIn stockPart No.50508
Steering Joint Lock Nut suitable for John Deere tractor For use with 50500 Steering Joint.
Thread: M18 x 1.5.
£2.10 Inc VAT £1.75 Exc VATIn stockPart No.80168
Track Rod End LH/RH suitable for John Deere tractorTrack Rod End LH/RH- Lock Nut Thread Length (A): 27mm- Taper Diameter (B - C): From 20mm – 22.2mm- Outer Diameter (D): 28mm- Effective length (E): 284mm- Internal Thread Siz... Show More£46.80 Inc VAT £39.00 Exc VATIn stockPart No.80307
Steering Joint suitable for John Deere tractor Steering Joint- Length (A): 175.5mm- Outer Thread Diameter(B): M18 x 1.5 RHT- Outer Thread Diameter (C): M20 x 1.5 RHTSupplied with Nut.£33.60 Inc VAT £28.00 Exc VATIn stockPart No.50500
Track Rod End suitable for John Deere tractorTRACK ROD END- Lock Nut Thread Length (A): 19mm- Taper Diameter (B - C): From 19.9mm – 22.3mm- Outer Thread Diameter (D): 24mm- Effective length (E): 95mm- Thread Size... Show More£25.20 Inc VAT £21.00 Exc VATIn stockPart No.50517Track Rods
-
Track Rod Assembly suitable for John Deere tractor Track Rod Assembly- Lock Nut Thread Length (A): 17.8mm- Taper Diameter (B - C): From 19.9mm – 22.3mm- Effective Length (D): 440mm- Outer Diameter (E): 30mmSupplied with Nut(s).Show More£91.20 Inc VAT £76.00 Exc VATIn stockPart No.50515
Track Rod Assembly suitable for John Deere tractorTrack Rod Assembly- Lock Nut Thread Length (A): 18.5mm- Taper Diameter (B - C): From 16.2mm – 18.7mm- Effective Length (D): 407mm- Outer Diameter (E): 28mmSupplied with Nut(s)... Show More£92.40 Inc VAT £77.00 Exc VATIn stockPart No.50507Axle Pivot Pins
-
John Deere Axle Locating Pin suitable for John Deere tractor OD: 40mm
Length: 94mm
£33.00 Inc VAT £27.50 Exc VATIn stockPart No.74443 -
Axle Pin suitable for John Deere tractor 40mm x 94mm£27.00 Inc VAT £22.50 Exc VATIn stockPart No.74317
Axle Pivot Bush
-
John Deere Front Axle Bush - 4WD suitable for John Deere tractor OD: 31.5mm
ID: 19.74mm
Length: 89.2mm
£14.40 Inc VAT £12.00 Exc VATIn stockPart No.74432 -
Axle Pivot Pin Bush suitable for John Deere tractor 40mm x 45mm x 38mm
£6.38 Inc VAT £5.32 Exc VATIn stockPart No.74870 -
Front Axle Bush suitable for John Deere tractor OD: 45mmID: 40mmWidth: 38mmHole: 6.15mm£4.80 Inc VAT £4.00 Exc VATIn stockPart No.74998
Axle Pin Subcom
-
Split Cotter Pin (20 Pack) suitable for John Deere tractor OD - 4mmWorking Length - 40mm£2.28 Inc VAT £1.90 Exc VATIn stockPart No.5716
Spindles
-
Spindle LH / RH suitable for John Deere tractor Shaft Length: 380mm.
Shaft Diameter: 38mm.£102.00 Inc VAT £85.00 Exc VATIn stockPart No.74559 -
Spindle LH / RH suitable for John Deere tractor Shaft Length: 375mm.
Shaft Diameter: 44.5mm.£86.83 Inc VAT £72.36 Exc VATIn stockPart No.74583
Spindle Repair Kits
-
Spindle Repair Kit suitable for John Deere tractor
For 38mm Spindles
£23.94 Inc VAT £19.95 Exc VATIn stockPart No.74225
Spindle Components
-
Bearing- 37.65 x 55.96 x 16.25mm suitable for John Deere tractor Bearing ID - 37.65 mm OD - 55.96 mm Width - 16.25 mm£6.18 Inc VAT £5.15 Exc VATIn stockPart No.52003
Steering Arm Components
-
John Deere Steering Arm Shaft suitable for John Deere tractor Pin For Top Arm£33.60 Inc VAT £28.00 Exc VATIn stockPart No.74446 -
Steering Arm Bush suitable for John Deere tractor 32mm x 37mm x 38mm
£3.65 Inc VAT £3.04 Exc VATIn stockPart No.74868
Wheel Hubs
-
Wheel Hub with Studs suitable for John Deere tractor Wheel Bearing Hole Diameter, Axle End: 65mm.
Wheel Bearing Hole Diameter, Hub Cap End: 49.5mm.£59.99 Inc VAT £49.99 Exc VATIn stockPart No.1550A -
Wheel Hub with Studs suitable for John Deere tractor Requires Wheel Bearing Kit, Agriline Ref. 1540.
Wheel Bearing Hole Diameter, Axle End: 90mm.
Wheel Bearing Hole Diameter, Hub Cap End: 68mm.£56.40 Inc VAT £47.00 Exc VATIn stockPart No.1551A -
£178.80 Inc VAT £149.00 Exc VATIn stockPart No.74316 -
£178.80 Inc VAT £149.00 Exc VATIn stockPart No.74315
Wheel Bearings
-
Outer Wheel Bearing suitable for John Deere tractor 2WD Axle. 33.20mm x 68.20mm£11.88 Inc VAT £9.90 Exc VATIn stockPart No.9307 -
Wheel Bearing Kit suitable for John Deere tractor
For Hubs With Bolt On Hub Cap
£23.99 Inc VAT £19.99 Exc VATOut of stockPart No.1540 -
Tapered Roller Bearing- 21.43 x 50 x 18.29mm suitable for John Deere tractor Bearing - I/D 21.43mm, O/D 50.00mm, Depth 18.29mm£15.00 Inc VAT £12.50 Exc VATIn stockPart No.55102 -
Wheel Bearing Kit suitable for John Deere tractor Kit Contains:
55102 - Tapered Roller Bearing: 21.43 x 50 x 18.29mm
5521 - Tapered Roller Bearing: 34.92 x 65.09 x 18.29mm
1538 - Oil Seal: 45 x 65 x 8mm£26.40 Inc VAT £22.00 Exc VATIn stockPart No.74170 -
Tapered Roller Bearing- 41.27 x 73.43 x 19.81mm suitable for John Deere tractor Bearing - I/D 41.27mm, O/D 73.43mm, Depth 19.81mmOutput shaft roller bearing for Ford 600 Series Tractors.£15.00 Inc VAT £12.50 Exc VATIn stockPart No.55101
Front Wheel Studs
-
Wheel Stud suitable for John Deere tractor Thread: 9/16" UNF.
Thread Length: 1. 1/2".
Overall Length: 2".
£2.70 Inc VAT £2.25 Exc VATIn stockPart No.80195
Hub Caps
-
Hub Cap suitable for John Deere tractor 3 Bolt Fixing£17.99 Inc VAT £14.99 Exc VATIn stockPart No.74319 -
Hub Cap suitable for John Deere tractor Hub Cap suitable for John DeereFitting Diameter = 50mm£5.40 Inc VAT £4.50 Exc VATIn stockPart No.73251
Hub Components
-
Oil Seal- 45 x 65 x 8mm D/Lip suitable for John Deere tractor Oil Seal -Type 2. DIN 3760. Size: I/D: 45mm x O/D: 65mm x Depth: 8mm. Double Lip.£2.40 Inc VAT £2.00 Exc VATIn stockPart No.1538 -
Hub Ring Gear - Fits Case, Ford & John Deere suitable for John Deere tractor 114 Teeth
APL 325, APL 325N
183mm x 207mm x 43mm
In stockPart No.74585 -
Hub Oil Seal suitable for John Deere tractor OD: 89.6mm.
ID: 60.16mm.
Width: 6mm.£4.20 Inc VAT £3.50 Exc VATIn stockPart No.74562 -
Wheel Hub Gasket suitable for John Deere tractor
3 Bolt Fixing
£2.88 Inc VAT £2.40 Exc VATOut of stockPart No.74250 -
Wheel Hub Retainer suitable for John Deere tractor
OD - 90mm
ID - 80.8mm
£5.10 Inc VAT £4.25 Exc VATIn stockPart No.74249 -
4WD Hub Bush suitable for John Deere tractor Length - 37mmID - 36.5mmOD - 41mm£5.33 Inc VAT £4.44 Exc VATIn stockPart No.74867 -
4WD Axle Beam Seal suitable for John Deere tractor 35 x 52.3 x 14.5mm£6.72 Inc VAT £5.60 Exc VATIn stockPart No.75482 -
Ring Gear suitable for John Deere tractor 4WD ZF Axle APL 325.
114 Teeth
183mm x 207mm x 43mm
£222.54 Inc VAT £185.45 Exc VATIn stockPart No.74348 -
Bearing- 34.92 x 65.09 x 18.29mm suitable for John Deere tractor Bearing Inner Hub From serial number 368615 Tapered Roller Bearing - Timken Type - I/D = 34.92mm. O/D = 65.09mm. Depth = 18.29mm Bearing Outer Hub IH354,374,384,444,B275,B414£11.40 Inc VAT £9.50 Exc VATIn stockPart No.5521
Steering Units
-
Orbital Steering Unit suitable for John Deere tractor Orbital Steering Unit£234.00 Inc VAT £195.00 Exc VATIn stockPart No.1548
Steering Wheels
-
Steering Wheel suitable for John Deere tractor Splined Centre.£19.80 Inc VAT £16.50 Exc VATIn stockPart No.1642
Steering Wheel Acc
-
Steering Wheel Woodruff Key suitable for John Deere tractor Steering Wheel Woodruff Key£1.20 Inc VAT £1.00 Exc VATIn stockPart No.5800
Power Steering Repair Kits
-
£19.80 Inc VAT £16.50 Exc VATIn stockPart No.6342
4WD Driveshaft
-
Universal Joint- Driveshaft (27MM X 70.50MM) suitable for John Deere tractor27MM X 70.50MM
Show More£22.50 Inc VAT £18.75 Exc VATOut of stockPart No.80075
Hub
-
Final Drive Shaft suitable for John Deere tractor ZF Axle: APL325. Splines: 18. Teeth: 18.£91.20 Inc VAT £76.00 Exc VATIn stockPart No.6172 -
4WD Planetary Gear suitable for John Deere tractor ZF Axle : APL325. 46 Teeth.£90.00 Inc VAT £75.00 Exc VATIn stockPart No.6165 -
£34.80 Inc VAT £29.00 Exc VATIn stockPart No.72207
4WD Axle
-
4WD Yoke Assembly suitable for John Deere tractor 4WD Yoke Assembly For APL325 Axle.Out of stockPart No.6521 -
Inner Axle Beam Seal AL32893 suitable for John Deere tractor APL1251 Axles.45mm x 28mm x 10mm.£7.08 Inc VAT £5.90 Exc VATIn stockPart No.75638
-