John Deere 40 Series, Classic 1140 Front Axle & Steering PARTS
Our range of steering and axle parts for John Deere 1140 tractors will get you heading in the right direction. Robust original quality steering joints and track rod ends are stocked along with kingpins, spindles, wheel bearings, axle seals, bushes, bearings, wheel hubs, repair kits, wheel nuts, power steering pumps, orbital units, hoses, steering boxes, seal kits, drive shafts, wheels and tyres.
Wheel Rims
-
Wheel Rim 4.50 x 16 suitable for John Deere tractorSuitable For Use With Tyre Size:- 6.00 X 16Agriline Recommend Using Their Tyre Reference T-002 Which Is A 6.00 X 16 Tyre, With This Rim.Agriline wheels are manufactured to a high degree of accur... Show More£34.80 Inc VAT £29.00 Exc VATIn stockPart No.2162Tyres
-
Tyre 6.00 - 16 (3 Rib) suitable for John Deere tractorT-002 is an 8 ply, 3 rib pattern front tyre; widely found on many vintage and classic 2WD farm tractors such as John Deere, David Brown, Ferguson, Fordson, Massey Ferguson, Ford, and Case International.Fits rim size 4.50... Show More£57.00 Inc VAT £47.50 Exc VATIn stockPart No.T-002
Tyre 7.50 - 16 (3 Rib) suitable for John Deere tractor Front 2WD tyre. Brand: ATF. 8 Ply.
Use With 2240 Rim And T-007 Inner Tube£71.99 Inc VAT £59.99 Exc VATOut of stockPart No.T-003Inner Tubes
-
Inner Tube- Front 6.00 x 16 suitable for John Deere tractor Use with T-002 Tyre.
Use With 2162 Rim And T-006 Tyre
£11.99 Inc VAT £9.99 Exc VATIn stockPart No.T-006 -
Inner Tube- Front 7.50 x 16 suitable for John Deere tractor Use with T-003 Tyre.£15.00 Inc VAT £12.50 Exc VATIn stockPart No.T-007
Wheel & Tyre Assemblies
-
Wheel & Tyre Assembly 5.50 x 16 (7.50 x 16 Goodyear Tyre) suitable for John Deere tractor Contains: Wheel Rim (5.50 x 16) x 1 Tyre - Front Goodyear (7.50 x 16) x 1 Inner Tube (7.50 x16) x 1 Supplied fully assembled - finished in undercoat£210.00 Inc VAT £175.00 Exc VATOut of stockPart No.22010 -
Wheel Rim 5.50 x 16 suitable for John Deere tractorSuitable For Use With Tyre Size:- 7.50 X 16Agriline Recommend Using Their Tyre Reference T-003 Which Is A 7.50 X 16 Tyre, With This Rim.Agriline wheels are manufactured to a high degree of... Show More£34.80 Inc VAT £29.00 Exc VATIn stockPart No.2240
Wheel & Tyre Assembly 5.50 x 16 (7.50 x 16 Tyre) suitable for John Deere tractorAgriline will handle the hard work for you, saving you the time and effort of assembling your own wheels, or the expense and inconvenience of hiring a fitter. Our team of expert fitters build Agriline wheel assemblies in-house.Show More £106.80 Inc VAT £89.00 Exc VATOut of stockPart No.22002Track & Drag Ends
-
Track Rod End suitable for John Deere tractor Suitable for 2WD applications. Low Clearance, Narrow Swept Axle- 1040, 1140, 1750.£32.40 Inc VAT £27.00 Exc VATIn stockPart No.50514 -
Track Rod End suitable for John Deere tractorTrack Rod End- Lock Nut Thread Length (A): 26.6mm- Taper Diameter (B - C): From 16.2mm – 18.7mm- Outer Diameter (D): 36mm- Effective length (E): 148mm- Internal Thread Size ... Show More£42.00 Inc VAT £35.00 Exc VATIn stockPart No.50509
Track Rod End suitable for John Deere tractorTrack Rod End- Lock Nut Thread Length (A): 26.6mm- Taper Diameter (B - C): From 16.2mm – 18.7mm- Outer Thread Diameter (D): 20mm- Effective length (E): 370mmSupplied wit... Show More£34.80 Inc VAT £29.00 Exc VATIn stockPart No.50508
Track Rod End suitable for John Deere tractor Suitable for 2WD applications. Standard Swept Axle.£33.24 Inc VAT £27.70 Exc VATIn stockPart No.50511Track Rods
-
Track Rod Assembly suitable for John Deere tractor Suitable for 2WD applications. Low Clearance, Narrow Swept Axle- 1040, 1140, 1750.£96.95 Inc VAT £80.79 Exc VATIn stockPart No.50513 -
Track Rod Assembly suitable for John Deere tractor Suitable for 2WD applications. Standard Swept Axle- 1040, 1140, 1750.£103.20 Inc VAT £86.00 Exc VATIn stockPart No.50510 -
Track Rod Assembly suitable for John Deere tractorTrack Rod Assembly- Lock Nut Thread Length (A): 18.5mm- Taper Diameter (B - C): From 16.2mm – 18.7mm- Effective Length (D): 407mm- Outer Diameter (E): 28mmSupplied with Nut(s)... Show More£92.40 Inc VAT £77.00 Exc VATIn stockPart No.50507Axle Pivot Pins
-
Axle Pin suitable for John Deere tractor 40mm x 94mm£27.00 Inc VAT £22.50 Exc VATOut of stockPart No.74317
Axle Pivot Bush
-
Front Axle Bush suitable for John Deere tractor OD: 45mmID: 40mmWidth: 38mmHole: 6.15mm£15.00 Inc VAT £12.50 Exc VATIn stockPart No.74998
Axle Pin Subcom
-
Split Cotter Pin (20 Pack) suitable for John Deere tractor OD - 4mmWorking Length - 40mm£2.28 Inc VAT £1.90 Exc VATIn stockPart No.5716
Spindles
-
Woodruff Key suitable for John Deere tractor 1/4 x 1. 1/4"£1.68 Inc VAT £1.40 Exc VATIn stockPart No.54027
Spindle Repair Kits
-
Spindle Repair Kit suitable for John Deere tractor
For 35mm Spindles
John Deere£23.99 Inc VAT £19.99 Exc VATOut of stockPart No.74226 -
Spindle Repair Kit suitable for John Deere tractor
For 38mm Spindles
£23.94 Inc VAT £19.95 Exc VATIn stockPart No.74225
Spindle Components
-
Spindle Bearing - 441242C1 suitable for John Deere tractorSpindle bearing.ID: 35.30mm.OD: 58.50mm.Width: 16mm.£7.80 Inc VAT £6.50 Exc VATIn stockPart No.76280 -
Spindle Bearing - 483253C92 suitable for John Deere tractor ID: 38mm.OD: 66mm.Width: 19.50mm.£13.20 Inc VAT £11.00 Exc VATIn stockPart No.76281 -
Hexagonal Nut - M12 - 14M7154 suitable for John Deere tractor Hexagonal Nut.Thread: 12mm (M12).Width: 19mm.Thread Pitch: 1.75mm.Thickness: 7mm.£1.44 Inc VAT £1.20 Exc VATOut of stockPart No.001-147154 -
Cotter Pin - 11M7030 suitable for John Deere tractor Cotter PinDimensionsDiameter: 5mmLength: 40mm£0.24 Inc VAT £0.20 Exc VATOut of stockPart No.001-117030
Steering Arm Components
-
Steering Arm Bush suitable for John Deere tractor 32mm x 37mm x 38mm
£3.65 Inc VAT £3.04 Exc VATIn stockPart No.74868
Wheel Hubs
-
Wheel Hub with Studs suitable for John Deere tractor Wheel Bearing Hole Diameter, Axle End: 65mm.
Wheel Bearing Hole Diameter, Hub Cap End: 49.5mm.£59.99 Inc VAT £49.99 Exc VATIn stockPart No.1550A -
Wheel Hub with Studs suitable for John Deere tractor Requires Wheel Bearing Kit, Agriline Ref. 1540.
Wheel Bearing Hole Diameter, Axle End: 90mm.
Wheel Bearing Hole Diameter, Hub Cap End: 68mm.£56.40 Inc VAT £47.00 Exc VATIn stockPart No.1551A -
£178.80 Inc VAT £149.00 Exc VATIn stockPart No.74316 -
Axle Hub Housing LH suitable for John Deere tractor Axle Hub Housing LHDimensions- Overall Height: 220mm- ID: 115mm- Upper / Lower Thread ID: 48.7mm- Track rod taper ... Show More£178.80 Inc VAT £149.00 Exc VATIn stockPart No.74315
Wheel Bearings
-
Outer Wheel Bearing suitable for John Deere tractor 2WD Axle. 33.20mm x 68.20mm£11.88 Inc VAT £9.90 Exc VATIn stockPart No.9307 -
Wheel Bearing Kit suitable for John Deere tractor
For Hubs With Bolt On Hub Cap
£23.99 Inc VAT £19.99 Exc VATOut of stockPart No.1540 -
Tapered Roller Bearing- 21.43 x 50 x 18.29mm suitable for John Deere tractor Bearing - I/D 21.43mm, O/D 50.00mm, Depth 18.29mm£8.27 Inc VAT £6.89 Exc VATIn stockPart No.55102 -
Wheel Bearing Kit suitable for John Deere tractor Kit Contains:
55102 - Tapered Roller Bearing: 21.43 x 50 x 18.29mm
5521 - Tapered Roller Bearing: 34.92 x 65.09 x 18.29mm
1538 - Oil Seal: 45 x 65 x 8mm£26.40 Inc VAT £22.00 Exc VATIn stockPart No.74170 -
Taper Roller Bearing - JD7445 suitable for John Deere tractor Taper roller BearingDimensionsID: 45.618mmOD: 83.058mmWidth: 25.4mm£19.20 Inc VAT £16.00 Exc VATIn stockPart No.76302 -
Taper Roller Bearing - JD10137 suitable for John Deere tractor Taper roller bearing.DimensionsID: 35mmOD: 62mmWidth: 18mm£10.80 Inc VAT £9.00 Exc VATIn stockPart No.76304
Front Wheel Studs
-
Wheel Stud suitable for John Deere tractor Thread: 9/16" UNF.
Thread Length: 1. 1/2".
Overall Length: 2".
£2.70 Inc VAT £2.25 Exc VATIn stockPart No.80195
Hub Caps
-
Hub Cap suitable for John Deere tractor Hub CapDimensions- 3 Bolt Fixing- Bolt Hole: 8.20mm- Distance between centres: 80mm- Grease nipple thread: 3/8UNF£17.99 Inc VAT £14.99 Exc VATIn stockPart No.74319 -
Hub Cap suitable for John Deere tractor Hub Cap suitable for John DeereFitting Diameter = 50mm£5.40 Inc VAT £4.50 Exc VATIn stockPart No.73251
Hub Components
-
Oil Seal- 45 x 65 x 8mm D/Lip suitable for John Deere tractor Oil Seal -Type 2. DIN 3760. Size: I/D: 45mm x O/D: 65mm x Depth: 8mm. Double Lip.£2.40 Inc VAT £2.00 Exc VATIn stockPart No.1538 -
Hub Oil Seal suitable for John Deere tractor OD: 89.6mm.
ID: 60.16mm.
Width: 6mm.£4.20 Inc VAT £3.50 Exc VATOut of stockPart No.74562 -
Wheel Hub Gasket suitable for John Deere tractor
3 Bolt Fixing
£2.88 Inc VAT £2.40 Exc VATOut of stockPart No.74250 -
Wheel Hub Retainer suitable for John Deere tractor
OD - 90mm
ID - 80.8mm
£5.10 Inc VAT £4.25 Exc VATIn stockPart No.74249 -
Bearing- 34.92 x 65.09 x 18.29mm suitable for John Deere tractor Bearing Inner Hub From serial number 368615 Tapered Roller Bearing - Timken Type - I/D = 34.92mm. O/D = 65.09mm. Depth = 18.29mm Bearing Outer Hub IH354,374,384,444,B275,B414£11.40 Inc VAT £9.50 Exc VATIn stockPart No.5521 -
Annular Gear - L35599 suitable for John Deere tractor Annular gear.DimensionsOD - 188mmID - 161/170mmHeight - 46mmTeeth - 72£87.60 Inc VAT £73.00 Exc VATOut of stockPart No.76392
Steering Wheel Acc
-
Steering Wheel Woodruff Key suitable for John Deere tractor Steering Wheel Woodruff Key£1.20 Inc VAT £1.00 Exc VATIn stockPart No.5800
Power Steering Kits
-
Power Steering Cylinder suitable for John Deere tractor 2WD Models Without Cab.
The Brake system must be fully flushed with new clean fluid to remove any residual contaminants that may be left in the system.
Warranty shall not be accepted for damaged seals due to contamination.£714.00 Inc VAT £595.00 Exc VATIn stockPart No.6377
Power Steering Ram
-
Power Steering Cylinder suitable for John Deere tractor 2WD Models Without Cab.
The Brake system must be fully flushed with new clean fluid to remove any residual contaminants that may be left in the system.
Warranty shall not be accepted for damaged seals due to contamination.£714.00 Inc VAT £595.00 Exc VATIn stockPart No.6377
Power Steering Ram Repair Kits
-
£41.99 Inc VAT £34.99 Exc VATIn stockPart No.74220
Hub
-
King Pin suitable for John Deere tractor King PinThread OD: 50mmStub Length: 30mmHex Size: 30mmOverall Length: 51.5mmSupplied with grease nippleShow More£34.80 Inc VAT £29.00 Exc VATIn stockPart No.72207
4WD Axle
-
Internal Snap Ring - 40M7115 suitable for John Deere tractorGenuine John Deere Snap RingDimensionsOD: 85.50mmID: 80mmWidth: 2.50mm£1.50 Inc VAT £1.25 Exc VATOut of stockPart No.001-407115
-
Hexagonal Nut - M16 - 14M7260 suitable for John Deere tractor Hexagonal Nut, M16 suitable for John Deere ApplicationsDimensionsThread Pitch: 2mmThickness: 8mmThread Size: 16mm£0.46 Inc VAT £0.38 Exc VATOut of stockPart No.001-107260
-
-