John Deere 3010 Series 3310 Engine PARTS
We stock a wide range of high quality replacement tractor engine spare parts to suit John Deere 3310 tractors. All parts come with an 18 months warranty. Our range includes; cylinder heads, gaskets, valves, engines, blocks, pistons, liners, piston rings, Seals, engine overhaul Kits, fuel pumps, oil pumps, crankshafts, engine bearings, oil filters, fuel filters, fuel pipes, manifolds, silencers and much more.
Cylinder Head Gasket
-
Head Gasket Set suitable for John Deere tractor Head Gasket Set£58.80 Inc VAT £49.00 Exc VATIn stockPart No.50370 -
£38.40 Inc VAT £32.00 Exc VATIn stockPart No.74996
Rocker Cover Gaskets
-
Rocker Cover Gasket suitable for John Deere tractor Rocker Cover Gasket£12.00 Inc VAT £10.00 Exc VATIn stockPart No.1605
Valve Springs
-
Valve Spring suitable for John Deere tractor Valve Spring, can be used with both INLET and EXHAUST valve.Overall length - 55cmOverall diameter - 35mm£4.32 Inc VAT £3.60 Exc VATIn stockPart No.1495
Valve Collets
-
Valve Collet (Pair) suitable for John Deere tractor Valve Collet (pair)£1.50 Inc VAT £1.25 Exc VATIn stockPart No.7407
Valve Ancillaries
-
Valve Cap suitable for John Deere tractor Valve CapID: 7.75mmOD: 18mmHeight: 12mm£3.00 Inc VAT £2.50 Exc VATIn stockPart No.1616 -
Valve Tappet suitable for John Deere tractor Valve Tappet£7.20 Inc VAT £6.00 Exc VATIn stockPart No.1502 -
Valve Stem Cap suitable for John Deere tractor Valve Stem CapOD: 13mmID: 9.4mmThickness: 6mm£3.60 Inc VAT £3.00 Exc VATIn stockPart No.1496
Rocker Components
-
Rocker Arm suitable for John Deere tractor Rocker Arm£16.80 Inc VAT £14.00 Exc VATOut of stockPart No.1501
Studs Cylinder Head
-
Cylinder Head Stud (Pack of 9) suitable for John Deere tractor 1/2" UNC, 9 Studs Per Pack.
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4. Rotate bolt a further 60 Degrees£22.80 Inc VAT £19.00 Exc VATIn stockPart No.1464 -
Cylinder Head Stud - 112MM suitable for John Deere tractor 1/2" UNC 112MM
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4.Then Rotate bolt a further 60 Degrees£10.91 Inc VAT £9.09 Exc VATIn stockPart No.1464A
Cyl Block Gaskets
-
Complete Gasket Set suitable for John Deere tractor John Deere. 2630 - Upto Serial Number 325067.£84.00 Inc VAT £70.00 Exc VATIn stockPart No.1640 -
Complete Gasket Set suitable for John Deere tractor Complete Gasket Set£65.99 Inc VAT £54.99 Exc VATIn stockPart No.50371
Oil Cooler
-
Oil Cooler suitable for John Deere tractor 1140 - From Serial Number 704046. 2850 - From Serial Number 795107. 3200 - From Serial Number 189846. 3300 - From Serial Number 189846. 3400 - From Serial Number 189846.£93.60 Inc VAT £78.00 Exc VATIn stockPart No.8089 -
Engine Oil Cooler - 5 Plate - RE560753 suitable for John Deere tractorEngine oil cooler suitable for John DeereDimensions175mm x 107.6mm x 35.8mm5 Plate Cooler£52.80 Inc VAT £44.00 Exc VATIn stockPart No.76549 -
Oil Cooler suitable for John Deere tractor 1040 - Upto Serial Number 704045. 1140 - Upto Serial Number 704045. 2150 - From Serial Number 704045. 2850 - Upto Serial Number 795106.£123.60 Inc VAT £103.00 Exc VATIn stockPart No.8066
Oil Pumps
-
Oil Pump Assembly suitable for John Deere tractor 3 Bolt fixing with modification Pipes to suit Pumps that were originally 4 Bolt£137.28 Inc VAT £114.40 Exc VATIn stockPart No.1505 -
Oil Pump RE504914 suitable for John Deere tractor Oil Pump.Show More£77.82 Inc VAT £64.85 Exc VATIn stockPart No.75570
Balancer Units
-
Balancer Bush - R115299 suitable for John Deere tractor ID: 40.2mm.OD: 43.34mm.Height: 27.7mm.£5.88 Inc VAT £4.90 Exc VATIn stockPart No.76577
Piston Engine
-
Piston, Pin & Clips RE28919 suitable for John Deere tractor Piston Length: 120mm.
Chamber Depth: 21.1mm.
Pin: 41.27mm.£40.80 Inc VAT £34.00 Exc VATIn stockPart No.1634 -
Piston, Pin & Clips RE505101 suitable for John Deere tractor Piston has a 2.5mm radius groove for the top piston ring.Piston Diameter: 106.39mm.Compression Height: 71.65mm.Piston Length: 100.6mm.Pin Diameter: 34.925mm.To suit Bore: 106... Show MoreIn stockPart No.1600Piston Rings Engine
-
Piston Ring Set - DD11831 suitable for John Deere tractor No. of Rings = 3 (2.97 x 2.36 x 3.45)Please note - These are Agriline brand for the Federal Mogul equivalent please order part number 1443FM.£18.00 Inc VAT £15.00 Exc VATIn stockPart No.1443 -
Piston Ring Set - RE66271 suitable for John Deere tractor For use with Piston 1600.Please note - These are Agriline brand for the Federal Mogul equivalent please order part number 1601FM.£16.80 Inc VAT £14.00 Exc VATIn stockPart No.1601 -
Piston Ring Set, Federal Mogul Brand - DD11831 suitable for John Deere tractor No. of Rings: 3 (2.97 x 2.36 x 3.45)Please note: These are Federal Mogul brand; for the Agriline equivalent please order part number 1443.£25.68 Inc VAT £21.40 Exc VATIn stockPart No.1443FM -
Piston Ring Set, Federal Mogul Brand - RE66271 suitable for John Deere tractor For use with Piston Agriline Part No. 1600.Please note: These are Federal Mogul brand; for the Agriline equivalent please order part number 1601.£26.10 Inc VAT £21.75 Exc VATIn stockPart No.1601FM
Liners Engine Cyl
-
Liner C/W Seals - R116397 suitable for John Deere tractor Liner which comes with sealing rings.Dimensions as follows -Bore diameter - 106.27mmFlange diameter - 125.80mmOverall height - 218.86mmFlange width - 9.75mmO... Show More£29.98 Inc VAT £24.98 Exc VATIn stockPart No.1604
Liner Shims & ORings
-
Liner Seal Kit suitable for John Deere tractor Contains 3 Seals to Suit Liners 1444 & 1604£3.20 Inc VAT £2.67 Exc VATIn stockPart No.1450
Sump Gaskets
-
Sump Gasket Paper suitable for John Deere tractor Paper Alternative to 1481 (Cork)£7.20 Inc VAT £6.00 Exc VATIn stockPart No.1483 -
Sump Gasket Cork suitable for John Deere tractor Cork Alternative to 1483 (Paper)£8.40 Inc VAT £7.00 Exc VATIn stockPart No.1481 -
Sump Gasket suitable for John Deere tractor Sump Gasket£7.80 Inc VAT £6.50 Exc VATIn stockPart No.1610
Crankshafts
-
Crankshaft - RE50618 suitable for John Deere tractor Genmot Crank Shaft suitable for John Deere *NOTE - Crankshaft will require cleaning to remove any rust preventative prior to fitting*DimensionsMain journal: 80mmConrod journal: 78mmNose length... Show More£570.00 Inc VAT £475.00 Exc VATOut of stockPart No.1621Main Bearings
-
Main Bearing Pair suitable for John Deere tractor Flanged Bearing With Intergrated Thrust - STD.£20.92 Inc VAT £17.43 Exc VATIn stockPart No.1486
Conrod Bushes
-
Small End Bush suitable for John Deere tractor Small End Bush£4.80 Inc VAT £4.00 Exc VATIn stockPart No.1462
Conrod Bolts & Nuts
-
CONROD BOLT - R501124 suitable for John Deere tractor Conrod Bolt.Length: 61mm.Thread: M12 x 1.25.£3.34 Inc VAT £2.78 Exc VATIn stockPart No.76395
Gears Crank
-
£33.60 Inc VAT £28.00 Exc VATOut of stockPart No.1574
Crankshaft Seals
-
Front Crank Seal suitable for John Deere tractor Front Crank Seal£9.00 Inc VAT £7.50 Exc VATIn stockPart No.1460 -
Rear Crank Seal suitable for John Deere tractor Rear Crank Seal£21.60 Inc VAT £18.00 Exc VATIn stockPart No.1461
Fly Wheel
-
Fly Wheel Ring Gear suitable for John Deere tractor Fly Wheel Ring Gear£46.80 Inc VAT £39.00 Exc VATIn stockPart No.72514
Camshaft
-
£134.40 Inc VAT £112.00 Exc VATOut of stockPart No.7586
Camshaft Followers
-
Push Rod suitable for John Deere tractor Push RodDimensions- Overall Length: 230mm- Diameter: 8.50mm£9.00 Inc VAT £7.50 Exc VATIn stockPart No.1503
Sump Engine
-
Sump Plug Washer suitable for John Deere tractor Price is Each (Per Washer)£2.99 Inc VAT £2.49 Exc VATOut of stockPart No.1506
Bottom Gasket Sets
-
£90.00 Inc VAT £75.00 Exc VATIn stockPart No.2552
Air Filters
-
Air Filter- Inner suitable for John Deere tractor Length: 355mm.
I.D: 81mm.
O.D: 98.4mm.
Currently unavailablePart No.1593 -
Air Filter - Outer - 87682993 suitable for John Deere tractor Outer Air FilterDimensionsLength: 356.4mm
Inner diameter: 90.5mm
Outer diameter: 165.1mmCurrently unavailablePart No.1592
Oil Filters
-
Oil Filter Spin On suitable for John Deere tractor Length: 136.7mm.Diameter: 94.1mm.£7.10 Inc VAT £5.92 Exc VATIn stockPart No.8493
Fuel Filters
-
Fuel Filter 5 Micron Final Filter suitable for John Deere tractor Secondary Fuel/Water Coalescer Element with Drain.Currently unavailablePart No.1585 -
Fleetguard FS19831 Fuel Filter suitable for John Deere tractor Overall height: 135mm, OD: 84mm, Inside Ø - End 1: 17mm, Inside Ø - End 2: mm.£26.40 Inc VAT £22.00 Exc VATIn stockPart No.FS19831 -
Fleetguard FS19838 Fuel Filter suitable for John Deere tractor Overall height: 116mm, OD: 84mm, Inside Ø - End 1: 17mm, Inside Ø - End 2: mm.£23.12 Inc VAT £19.27 Exc VATIn stockPart No.FS19838 -
Secondary Fuel Filter suitable for John Deere tractorFuel Filter for John DeereProduct Info:- Filter Type: Spin-On- Length : 71.12 mm- Diameter: 83.058 mm- Micron Rating: 5Show More £34.80 Inc VAT £29.00 Exc VATOut of stockPart No.001-60021 -
Fuel Filter suitable for John Deere tractor Fuel FilterProduct Info:- Overall Height: 116mm- Outer Diameter: 84mm£16.80 Inc VAT £14.00 Exc VATOut of stockPart No.77388
Fuel Lift Pumps
-
Fuel Lift Pump w/ Glass Bowl suitable for John Deere tractor Fuel Lift Pump w/ Glass BowlGasket Included£23.99 Inc VAT £19.99 Exc VATIn stockPart No.55008 -
Fuel Lift Pump suitable for John Deere tractor Replacement for original Sofabex or Corona style Lift Pumps.Gasket Included£25.80 Inc VAT £21.50 Exc VATIn stockPart No.55016
Fuel Pipes
-
Tee Fitting - R71963 suitable for John Deere tractor Tee fitting for Injectors suitable for John Deere.Thread: M14.£10.80 Inc VAT £9.00 Exc VATIn stockPart No.76562
Fuel Injectors
-
Injector Line Seal suitable for John Deere tractor I/D Ø : 6.2mm
O/D Ø : 10.5mm
Height : 5.8mm£0.24 Inc VAT £0.20 Exc VATIn stockPart No.1512 -
Fuel Injector suitable for John Deere tractor Fuel InjectorInjector Nozzle marked with - 28485£58.80 Inc VAT £49.00 Exc VATIn stockPart No.9487A -
Fuel Injector RE60062 suitable for John Deere tractor Fuel Injector.Tee Connector Not Included.Suitable For Replacing Injectors With Injector Nozzle Number:- 28478 / 32262£42.00 Inc VAT £35.00 Exc VATIn stockPart No.1612 -
Injector Seal - R79605 suitable for John Deere tractor Tee Fitting Washer.Seals the top of the fuel injector to the T fitting,One Required per injector, supplied as singles- OD: 13mm- ID: 9mm&n... Show More£1.08 Inc VAT £0.90 Exc VATIn stockPart No.1513Fuel Ancillaries
-
Fuel Shut Off Solenoid - RE22744 suitable for John Deere tractor Fuel Shut Off SolenoidFuel Thread OD: 13.7mm£21.60 Inc VAT £18.00 Exc VATOut of stockPart No.2074 -
Fuel Shut Off Solenoid suitable for John Deere tractor Fuel Shut Off Solenoid£21.00 Inc VAT £17.50 Exc VATOut of stockPart No.2073
Fuel Filter Housings
-
Final Fuel Filter Head - RE500160 suitable for John Deere tractor Final fuel filter headDimensionsWidth: 4"Length: 4.25"£40.80 Inc VAT £34.00 Exc VATIn stockPart No.76552
-
-
-