John Deere 3000 Series 3200 Engine PARTS
We stock a wide range of high quality replacement tractor engine spare parts to suit John Deere 3200 tractors. All parts come with an 18 months warranty. Our range includes; cylinder heads, gaskets, valves, engines, blocks, pistons, liners, piston rings, Seals, engine overhaul Kits, fuel pumps, oil pumps, crankshafts, engine bearings, oil filters, fuel filters, fuel pipes, manifolds, silencers and much more.
Cylinder Head Gasket
-
Head Gasket Set suitable for John Deere tractor Head Gasket Set£58.80 Inc VAT £49.00 Exc VATIn stockPart No.50370
Valve Springs
-
Valve Spring suitable for John Deere tractor Valve Spring, can be used with both INLET and EXHAUST valve.Overall length - 55cmOverall diameter - 35mm£4.32 Inc VAT £3.60 Exc VATIn stockPart No.1495
Valve Collets
-
Valve Collet (Pair) suitable for John Deere tractor Valve Collet (pair)£1.50 Inc VAT £1.25 Exc VATIn stockPart No.7407
Valve Ancillaries
-
Valve Cap suitable for John Deere tractor Valve CapID: 7.75mmOD: 18mmHeight: 12mm£3.00 Inc VAT £2.50 Exc VATIn stockPart No.1616 -
Valve Tappet suitable for John Deere tractor Valve Tappet£7.20 Inc VAT £6.00 Exc VATIn stockPart No.1502 -
Valve Stem Cap suitable for John Deere tractor Valve Stem CapOD: 13mmID: 9.4mmThickness: 6mm£3.60 Inc VAT £3.00 Exc VATIn stockPart No.1496
Studs Cylinder Head
-
Cylinder Head Stud (Pack of 9) suitable for John Deere tractor 1/2" UNC, 9 Studs Per Pack.
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4. Rotate bolt a further 60 Degrees£22.80 Inc VAT £19.00 Exc VATIn stockPart No.1464 -
Cylinder Head Stud - 112MM suitable for John Deere tractor 1/2" UNC 112MM
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4.Then Rotate bolt a further 60 Degrees£10.91 Inc VAT £9.09 Exc VATIn stockPart No.1464A
Cyl Block Gaskets
-
Complete Gasket Set suitable for John Deere tractor Complete Gasket Set£65.99 Inc VAT £54.99 Exc VATIn stockPart No.50371
Oil Cooler
-
Oil Cooler suitable for John Deere tractor 1140 - From Serial Number 704046. 2850 - From Serial Number 795107. 3200 - From Serial Number 189846. 3300 - From Serial Number 189846. 3400 - From Serial Number 189846.£93.60 Inc VAT £78.00 Exc VATIn stockPart No.8089 -
Engine Oil Cooler - 5 Plate - RE560753 suitable for John Deere tractorEngine oil cooler suitable for John DeereDimensions175mm x 107.6mm x 35.8mm5 Plate Cooler£52.80 Inc VAT £44.00 Exc VATIn stockPart No.76549 -
Oil Cooler - 9 Plate - RE59298 suitable for John Deere tractor Oil Cooler suitable for John Deere9 Plate Oil Cooler£117.84 Inc VAT £98.20 Exc VATOut of stockPart No.77068
Oil Pumps
-
Oil Pump Assembly suitable for John Deere tractor 3 Bolt fixing with modification Pipes to suit Pumps that were originally 4 Bolt£137.28 Inc VAT £114.40 Exc VATIn stockPart No.1505 -
Oil Pump Assembly suitable for John Deere tractor Later version Oil Pump with 4 Bolt Holes£59.88 Inc VAT £49.90 Exc VATOut of stockPart No.1504 -
Oil Pump RE504914 suitable for John Deere tractor Oil Pump.Show More£77.82 Inc VAT £64.85 Exc VATIn stockPart No.75570
£123.38 Inc VAT £102.82 Exc VATOut of stockPart No.75571
Piston Engine
-
Piston, Ring & Liner Kit suitable for John Deere tractor Includes Liner O-Rings.£84.00 Inc VAT £70.00 Exc VATIn stockPart No.4770 -
Piston, Pin & Clips suitable for John Deere tractor Crown diameter: 105.870mm.Skirt diameter: 106.390mm.Compression height: 66.306mm.Overall height: 112.020mm.Chamber diameter: 58.360mm.Chamber depth: 18.800mm.Pi... Show More£42.96 Inc VAT £35.80 Exc VATIn stockPart No.1442
Piston, Pin & Clips suitable for John Deere tractor Al-Fin Ring.Crown diameter: 104.730mm.Skirt diameter: 106.390mm.Compression height: 71.625mm.Overall height: 104.625mm.Chamber diameter: 56.94mm.Chamber depth: 25.45m... Show MoreIn stockPart No.1602Piston Rings Engine
-
Piston Ring Set - DD11831 suitable for John Deere tractor No. of Rings = 3 (2.97 x 2.36 x 3.45)Please note - These are Agriline brand for the Federal Mogul equivalent please order part number 1443FM.£18.00 Inc VAT £15.00 Exc VATIn stockPart No.1443 -
Piston Ring Set, Federal Mogul Brand - DD11831 suitable for John Deere tractor No. of Rings: 3 (2.97 x 2.36 x 3.45)Please note: These are Federal Mogul brand; for the Agriline equivalent please order part number 1443.£25.68 Inc VAT £21.40 Exc VATIn stockPart No.1443FM
Liners Engine Cyl
-
Liner C/W Seals suitable for John Deere tractor Finished Liner. Basic Specifications: Bore Dia 106.508 mm Height 196.930 mm. Comes with Sealing Rings. Wet Liner£33.60 Inc VAT £28.00 Exc VATIn stockPart No.1444
Liner Shims & ORings
-
Liner Seal Kit suitable for John Deere tractor Contains 3 Seals to Suit Liners 1444 & 1604£3.20 Inc VAT £2.67 Exc VATIn stockPart No.1450
Sump Gaskets
-
Sump Gasket Paper suitable for John Deere tractor Paper Alternative to 1481 (Cork)£7.20 Inc VAT £6.00 Exc VATIn stockPart No.1483 -
Sump Gasket Cork suitable for John Deere tractor Cork Alternative to 1483 (Paper)£8.40 Inc VAT £7.00 Exc VATIn stockPart No.1481 -
Sump Gasket suitable for John Deere tractor Sump Gasket£7.80 Inc VAT £6.50 Exc VATIn stockPart No.1610
Crankshafts
-
Crankshaft (Genmot) suitable for John Deere tractor Crankshaft (Genmot)Currently unavailablePart No.72279 -
Crankshaft - RE50618 suitable for John Deere tractor Genmot Crank Shaft suitable for John Deere *NOTE - Crankshaft will require cleaning to remove any rust preventative prior to fitting*DimensionsConrod Bearings
-
Conrod Bearing Pair suitable for John Deere tractor Product is 1 Pair of Shells, + 0.030" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£4.20 Inc VAT £3.50 Exc VATIn stockPart No.1488C -
Conrod Bearing Pair suitable for John Deere tractor Product is 1 Pair of Shells, + 0.010" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£4.20 Inc VAT £3.50 Exc VATIn stockPart No.1488A -
Conrod Bearing Pair suitable for John Deere tractor Product is 1 Pair of Shells, STANDARD For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£5.40 Inc VAT £4.50 Exc VATIn stockPart No.1488 -
Conrod Bearing Pair suitable for John Deere tractor Product is 1 Pair of Shells, + 0.020" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 Pairs£4.20 Inc VAT £3.50 Exc VATIn stockPart No.1488B
Conrods
-
Conrod suitable for John Deere tractor *Serial Number Break Applies Please View Details*. John Deere. 2040S - From Serial Number 430000. 2650 - Suitable For Collar Shift Transmission Only. 3350 - Upto Serial Number For Spanish Built Models.Small End/Pin size ID: 34mm... Show More£66.00 Inc VAT £55.00 Exc VATIn stockPart No.1489Conrod Bushes
-
Small End Bush suitable for John Deere tractor Semi Finished. 41mm Piston Pin. Size when reamed Min/Max 41.300 - 41.330 mm£4.20 Inc VAT £3.50 Exc VATIn stockPart No.1463 -
Small End Bush suitable for John Deere tractor Small End Bush£4.80 Inc VAT £4.00 Exc VATIn stockPart No.1462
Conrod Bolts & Nuts
-
Connecting Rod Bolt suitable for John Deere tractor 59mm Long. Note, some John Deere Connecting Rod Bolts were set at 54mm£4.20 Inc VAT £3.50 Exc VATOut of stockPart No.1491
Crankshaft Seals
-
Front Crank Seal suitable for John Deere tractor Front Crank Seal£9.00 Inc VAT £7.50 Exc VATIn stockPart No.1460 -
Rear Crank Seal suitable for John Deere tractor Rear Crank Seal£21.60 Inc VAT £18.00 Exc VATIn stockPart No.1461
Camshaft
-
Camshaft Bush R119874 suitable for John Deere tractor John Deere 4039T, 6359DOD: 60mmID: 56mmLength: 38.8mm£8.28 Inc VAT £6.90 Exc VATIn stockPart No.75573
Camshaft Followers
-
Push Rod suitable for John Deere tractor Push RodDimensions- Overall Length: 230mm- Diameter: 8.50mm£9.00 Inc VAT £7.50 Exc VATIn stockPart No.1503
Bottom Gasket Sets
-
£90.00 Inc VAT £75.00 Exc VATIn stockPart No.2552
Air Filters
-
Air Filter- Inner suitable for John Deere tractor Length: 355mm.
I.D: 81mm.
O.D: 98.4mm.
Currently unavailablePart No.1593 -
Fleetguard AF25558 Inner Air Filter suitable for John Deere tractor Inner Air Filter£27.70 Inc VAT £23.08 Exc VATOut of stockPart No.AF25558 -
Fleetguard AF25555 Outer Air Filter suitable for John Deere tractor Outer Air Filter£25.76 Inc VAT £21.47 Exc VATIn stockPart No.AF25557 -
Fleetguard AF26393 Air Filter Outer suitable for John Deere tractor *Serial Number Break Applies Please View Details*. OD: 6 3/8" / 161.9mm. ID:3 3/4" / 95.3mm. Length: 14 3/4" / 374.7mm. Massey Ferguson. 4225 - Build Number Prefix LM Build Number Prefix AJ Use With 383mm Long Air Cleaner Box. 4235 - Build N... Show More£44.72 Inc VAT £37.27 Exc VATIn stockPart No.AF26393 -
Fleetguard AF26394 Air Filter Inner suitable for John Deere tractor *Serial Number Break Applies Please View Details*. OD: 3 17/32" / 88.7mm. ID: 3 13/32" / 86.5mm One End. Length: 14 7/32" / 361.2mm. Massey Ferguson. 4225 - Build Number Prefix LM Build Number Prefix AJ Use With 383mm Long Air Cleaner Box. ... Show More£38.99 Inc VAT £32.49 Exc VATOut of stockPart No.AF26394
Oil Filters
-
Fleetguard LF3703 Oil Filter suitable for John Deere tractor Overall height: 146mm, OD: 94mm, Thread size: 11/2 - 16 UN-2B UN-2B,£22.45 Inc VAT £18.71 Exc VATOut of stockPart No.LF3703 -
Fleetguard LF678 Oil Filter suitable for John Deere tractor Overall height: 138mm, OD: 93mm, Thread size: 13/16 - 16 UNS-2B ,£10.24 Inc VAT £8.53 Exc VATOut of stockPart No.LF678 -
Oil Filter suitable for John Deere tractor Engine oil filterProduct Info:- Height: 138mm- OD: 93mm- Thread Size: 13/16 - 16UNS - 2B£10.24 Inc VAT £8.53 Exc VATOut of stockPart No.77336
Fuel Filters
-
Fleetguard FS19831 Fuel Filter suitable for John Deere tractor Overall height: 135mm, OD: 84mm, Inside Ø - End 1: 17mm, Inside Ø - End 2: mm.£26.40 Inc VAT £22.00 Exc VATIn stockPart No.FS19831 -
Fleetguard FS19861 Fuel Filter suitable for John Deere tractor Overall height: 155mm, OD: 84mm, Thread size: -,£23.22 Inc VAT £19.35 Exc VATOut of stockPart No.FS19861
Fuel Lift Pumps
-
Fuel Lift Pump suitable for John Deere tractor Replacement for original Sofabex or Corona style Lift Pumps.Gasket Included£25.80 Inc VAT £21.50 Exc VATIn stockPart No.55016 -
Fuel Lift Pump suitable for John Deere tractor Fuel Lift PumpGasket Included£35.88 Inc VAT £29.90 Exc VATOut of stockPart No.7644
Fuel Pipes
-
Tee Fitting - R71963 suitable for John Deere tractor Tee fitting for Injectors suitable for John Deere.Thread: M14.£10.80 Inc VAT £9.00 Exc VATIn stockPart No.76562
Fuel Injectors
-
Injector Line Seal suitable for John Deere tractor I/D Ø : 6.2mm
O/D Ø : 10.5mm
Height : 5.8mm£0.24 Inc VAT £0.20 Exc VATIn stockPart No.1512 -
Fuel Injector RE36935 suitable for John Deere tractor Fuel InjectorInjector Nozzle marked with - 28480£58.80 Inc VAT £49.00 Exc VATIn stockPart No.9478A -
Injector Seal - R79605 suitable for John Deere tractor Tee Fitting Washer.Seals the top of the fuel injector to the T fitting,One Required per injector, supplied as singles- OD: 13mm- ID: 9mm&n... Show More£1.08 Inc VAT £0.90 Exc VATIn stockPart No.1513Fuel Ancillaries
-
Fuel Shut Off Solenoid - RE22744 suitable for John Deere tractor Fuel Shut Off SolenoidFuel Thread OD: 13.7mm£21.60 Inc VAT £18.00 Exc VATOut of stockPart No.2074 -
Fuel Shut Off Solenoid suitable for John Deere tractor Fuel Shut Off Solenoid£21.00 Inc VAT £17.50 Exc VATOut of stockPart No.2073
Fuel Filter Housings
-
Fuel Filter Sediment Bowl - RE51650 suitable for John Deere tractor Fuel filter sediment bowl suitable for John DeereThread Size: M10 x 1.5OD: 80mm£34.80 Inc VAT £29.00 Exc VATIn stockPart No.76551 -
Final Fuel Filter Head - RE500160 suitable for John Deere tractor Final fuel filter headDimensionsWidth: 4"Length: 4.25"£40.80 Inc VAT £34.00 Exc VATIn stockPart No.76552
Filler Caps Oil
-
Engine Oil Cap suitable for John Deere tractor Engine Oil Cap£5.70 Inc VAT £4.75 Exc VATIn stockPart No.74959
Exhaust Manifold
-
Exhaust Manifold 4 Cylinder suitable for John Deere tractor Exhaust Manifold 4 Cylinder,75.20mm Cylinder Head Stud hole centresUse Agriline Ref: 1507 for exhaust gasket.£180.00 Inc VAT £150.00 Exc VATIn stockPart No.92092
-
-
-