Ferguson Ferguson TED20 Engine PARTS
We stock a wide range of high quality replacement tractor engine spare parts to suit Ferguson TED20 tractors. All parts come with an 18 months warranty. Our range includes; cylinder heads, gaskets, valves, engines, blocks, pistons, liners, piston rings, Seals, engine overhaul Kits, fuel pumps, oil pumps, crankshafts, engine bearings, oil filters, fuel filters, fuel pipes, manifolds, silencers and much more.
Cylinder Head Gasket
-
Gasket Figure of Eight (Pair) suitable for Ferguson - Suits Standard Engine 85mm Bore Liner. UK Made.£5.70 Inc VAT £4.75 Exc VATIn stockPart No.5355 -
Head Gasket suitable for Ferguson - 85mm Engine.£21.00 Inc VAT £17.50 Exc VATIn stockPart No.7678 -
Head Gasket Set suitable for Ferguson - 85mm Bore.£28.80 Inc VAT £24.00 Exc VATIn stockPart No.53158
Rocker Cover Gaskets
-
£5.69 Inc VAT £4.74 Exc VATIn stockPart No.7271
Valves Engine
-
Inlet Valve Guide suitable for Ferguson - Both Inlet & Exhaust Guide For TE Models.£3.60 Inc VAT £3.00 Exc VATIn stockPart No.7434 -
Valve Inlet suitable for Ferguson -Tractors after Serial number 225311.Valve Inlet.
Head Diameter: 28.1mm.
Total Length: 108.3mm.
Stem Diameter: 7.9mm.
Standard type with 45 Degree seat angle.
£5.88 Inc VAT £4.90 Exc VATIn stockPart No.7231 -
Exhaust Valve suitable for Ferguson - Valve Exhaust.
Head Diameter: 26.5mm.
Total Length: 108.3mm.
Stem Diameter: 7.9mm.
Standard type with 45 Degree seat angle.£5.88 Inc VAT £4.90 Exc VATIn stockPart No.7433
Valve Kits
-
Valve Train Kit suitable for Ferguson - Kit contains:4 x Valve Inlet.4 x Valve Exhaust.8 x Valve Spring.8 x Valve Guide.8 x Valve Collet (Pair).£62.40 Inc VAT £52.00 Exc VATIn stockPart No.7455
Valve Springs
-
Valve Spring suitable for Ferguson - Inlet & Exhaust Valve. UK Made.£5.40 Inc VAT £4.50 Exc VATIn stockPart No.7230
Valve Collets
-
Valve Collet (Pair) suitable for Ferguson - Price Per Pair. * FE35 DIESEL & PETROL, MF35 PETROL & MF135 PETROL* INLET VALVE COLLETS ONLY * * TE MODELS * INLET & EXHAUST VALVE COLLETS ONLY *£3.60 Inc VAT £3.00 Exc VATIn stockPart No.7365
Studs Cylinder Head
-
Cylinder Head Stud Kit 85mm Only suitable for Ferguson - 85mm TE Petrol Engine Consists of 10 x Cylinder Head Studs Use with 50143 Nut 7/16" UNF-HT. Exclusive To Agriline.£73.14 Inc VAT £60.95 Exc VATOut of stockPart No.A-900 -
Nut Cylinder Stud and Conrod suitable for Ferguson - Nut 7/16" UNF-HTSuitable For 8696 Cylinder Head Stud, A-856 Cylinder Head Stud & 7143 Conrod BoltMF50B Perkins A4.212 Engine - Rocker Arm Screw Nut.£1.08 Inc VAT £0.90 Exc VATIn stockPart No.50143 -
Cylinder Head Stud 142mm Length suitable for Ferguson - 826304M1 Exclusive to Agriline.Ferguson / Standard Engine Cylinder Head Stud From Serial Number S170174E.142mm Long. 5 1/2" Long.End A: 7/16" BSW x 3/4" Long.End B: 7/16" UNF x 3/4" Long.<... Show More£9.00 Inc VAT £7.50 Exc VATOut of stockPart No.8696
Cylinder Block Ancil
-
Engine Block Core Plug Kit suitable for Ferguson - Engine Block Core Plug Kit£5.26 Inc VAT £4.38 Exc VATIn stockPart No.80210
Cyl Block Gaskets
-
£33.60 Inc VAT £28.00 Exc VATOut of stockPart No.53159
Engine Kits
-
Ferguson TED20 Engine Overhaul Kit suitable for Ferguson - 894915M91 501821 1692583M1 TE20 Engine Overhaul Kit 85mm Petrol/TVO Comprises: 4 x Liner 85mm 4 x Piston Ring Set 85mm 4 x Piston 1 x Top Gasket Set 1 x Bottom Gasket Set 1 x Front Crank Seal 1 x Rear Crank Seal 4 x Small End Bush£198.00 Inc VAT £165.00 Exc VATIn stockPart No.7006
Oil Pumps
-
Woodruff Key suitable for Ferguson - Applications:
Fordson Dexta, Super Dexta, Major, Power Major, Super Major - Throttle Lever Woodruff Key
Ferguson TEA20 & TED20- Oil Pump Drive Shaft Woodruff Key.
Massey Ferguson- 35 Petrol & 135 Petrol- Oil Pump Drive Sha... Show More£0.90 Inc VAT £0.75 Exc VATIn stockPart No.6448 -
Oil Pump Shaft & Rotor suitable for Ferguson - Oil Pump Shaft & Rotor£34.80 Inc VAT £29.00 Exc VATIn stockPart No.7064
Oil Lines
-
Oil Pressure Pipe suitable for Ferguson - Oil Pressure Pipe£18.00 Inc VAT £15.00 Exc VATIn stockPart No.7246
Piston Engine
-
Piston, Ring & Liner Kit suitable for Ferguson - 85mm Engine.£58.80 Inc VAT £49.00 Exc VATIn stockPart No.7503 -
Piston, Pin & Clips suitable for Ferguson -Superseded by Agriline 7453A85mm Bore
* Use Agriline Piston Ring Set No. 7243.
Piston Length: 87.519mm.
Pin: 22.23mm (7/8").
Compression Height: 51.054mm.
To Fit Bore 85mm.
No. of Rings: 5.In stockPart No.7453 -
Piston, Pin and Clips suitable for Ferguson - 200570 Piston. 85mm Bore£17.99 Inc VAT £14.99 Exc VATIn stockPart No.7453A
Piston Rings Engine
-
Piston Ring Set suitable for Ferguson - 836118M91 836821M91 85mm BoreFor use with 7453A Piston£15.00 Inc VAT £12.50 Exc VATIn stockPart No.7243A -
Piston Ring Set - Massey Ferguson 836118M91 suitable for Ferguson -Superseded by Agriline Ref 7243A85mm Bore.
* For use with Agriline Piston No. 7453 only.
Bottom oil scraper ring is not compatible with original piston.Currently unavailablePart No.7243
Liners Engine Cyl
-
Liner - 85mm suitable for Ferguson - Liner - 85mm£30.00 Inc VAT £25.00 Exc VATIn stockPart No.7454
Cylinder Tools
-
Piston Ring Pliers 50-100mm suitable for Ferguson - Piston Ring Pliers Gently supports, then expands rings when removing or fitting to pistons. Helps prevent scratching pistons and greatly reduces the risk or ring breakage. Supplied individually boxed.£18.00 Inc VAT £15.00 Exc VATOut of stockPart No.A-565 -
Piston Ring Groove Cleaner suitable for Ferguson - For fast and reliable removal of Carbon & Glaze Deposits from Piston Ring Grooves. Suits Most Pistons between 51mm & 127mm Diameters. Each of our Exclusive Cleaners comes complete with 3 x 6 bladed cutters, covering most of the popular sizes !! Cutt... Show More£35.96 Inc VAT £29.97 Exc VATIn stockPart No.A-626 -
Piston Ring Compressor suitable for Ferguson - Piston Ring Compressor 150mm Depth with Dual Compression Belts Capacities from 60mm - 150mm£28.21 Inc VAT £23.51 Exc VATIn stockPart No.A-625
Engine Sump
-
Oil Seal - Governor Shaft suitable for Ferguson - Oil Seal - Governor Shaft£26.40 Inc VAT £22.00 Exc VATIn stockPart No.7778
Sump Gaskets
-
Sump Gasket suitable for Ferguson - Sump Gasket£4.50 Inc VAT £3.75 Exc VATIn stockPart No.50146 -
Sump Strainer Gasket suitable for Ferguson - Sump Strainer Gasket£1.80 Inc VAT £1.50 Exc VATIn stockPart No.75502
Crankshafts
-
TEA Petrol Crankshaft suitable for Ferguson - Crankshaft3/8 UNF Flywheel bolts x 4, 2 Dowl HolesNose Diameter: 28.5mmNose Narrow Length: 69.7mmMains: 2.479"/2.795"Conrods: 2.0861... Show More£293.52 Inc VAT £244.60 Exc VATOut of stockPart No.92402
Conrod Bearings
-
Conrod Bearing Set suitable for Ferguson - + 0.020"Suitable for Standard Motor Company 80mm, 85mm & 87mm Engines.£10.94 Inc VAT £9.12 Exc VATOut of stockPart No.7172B -
Conrod Bearing Set suitable for Ferguson - + 0.010"Suitable for Standard Motor Company 80mm, 85mm & 87mm Engines.£10.70 Inc VAT £8.92 Exc VATIn stockPart No.7172A -
Conrod Bearing Set suitable for Ferguson - + 0.030"Suitable For Standard Motor Company 80mm, 85mm & 87mm Engines.£11.18 Inc VAT £9.32 Exc VATIn stockPart No.7172C -
Conrod Bearing Set suitable for Ferguson - + 0.040"Suitable For Standard Motor Company 80mm, 85mm & 87mm Engines.£11.44 Inc VAT £9.53 Exc VATIn stockPart No.7172D -
Conrod Bearing Set suitable for Ferguson - Standard Size. (STD)Suitable For Standard Motor Company 80mm, 85mm & 87mm Engines.£23.99 Inc VAT £19.99 Exc VATIn stockPart No.7172
Main Bearings
-
Main Bearing Set suitable for Ferguson - Standard. Standard Motor Company 80mm, 85mm & 87mm Engine.£23.40 Inc VAT £19.50 Exc VATIn stockPart No.7173 -
Main Bearing Set suitable for Ferguson - + 0.010". Standard Motor Company 80mm, 85mm & 87mm Engine.£23.40 Inc VAT £19.50 Exc VATIn stockPart No.7173A -
Main Bearing Set suitable for Ferguson - + 0.020". Standard Motor Company 80mm, 85mm & 87mm Engine.£23.40 Inc VAT £19.50 Exc VATIn stockPart No.7173B
Conrod Bushes
-
Conrod Bush suitable for Ferguson - Semi Finished. Standard Motor Company 80mm, 85mm & 87mm Engine.£4.79 Inc VAT £3.99 Exc VATIn stockPart No.7304
Conrod Bolts & Nuts
-
Conrod Tab Washer suitable for Ferguson - Tab Washer - Conrod£1.80 Inc VAT £1.50 Exc VATIn stockPart No.7447 -
Nut Cylinder Stud and Conrod suitable for Ferguson - Nut 7/16" UNF-HTSuitable For 8696 Cylinder Head Stud, A-856 Cylinder Head Stud & 7143 Conrod BoltMF50B Perkins A4.212 Engine - Rocker Arm Screw Nut.£1.08 Inc VAT £0.90 Exc VATIn stockPart No.50143
Thrust Washers Crank
-
Thrust Washer suitable for Ferguson - Standard.£15.00 Inc VAT £12.50 Exc VATIn stockPart No.7232
Gears Crank
-
Cup and Shaft Assembly suitable for Ferguson - Cup and Shaft Assembly£15.60 Inc VAT £13.00 Exc VATIn stockPart No.7305 -
Flywheel Locking Tab suitable for Ferguson - Flywheel Locking Tab£3.60 Inc VAT £3.00 Exc VATIn stockPart No.7122 -
Flywheel Ring Gear - 12V suitable for Ferguson - Flywheel Ring Gear TE20 - 12 volt systems only - 145 Teeth, 340mmRing gear requires being heated up to expand then pres... Show More£41.99 Inc VAT £34.99 Exc VATOut of stockPart No.7247
£51.60 Inc VAT £43.00 Exc VATIn stockPart No.7322
Crankshaft Seals
-
Crankshaft Seal Rear suitable for Ferguson - Crankshaft Seal Rear£6.00 Inc VAT £5.00 Exc VATIn stockPart No.7028 -
Flywheel Locking Tab suitable for Ferguson - Flywheel Locking Tab£3.60 Inc VAT £3.00 Exc VATIn stockPart No.7122
-
Seal Crank Shaft suitable for Ferguson - Seal Crank Shaft£6.56 Inc VAT £5.47 Exc VATIn stockPart No.7027 -
Flywheel Ring Gear - 12V suitable for Ferguson - Flywheel Ring Gear TE20 - 12 volt systems only - 145 Teeth, 340mmRing gear requires being heated up to expand then pres... Show More£41.99 Inc VAT £34.99 Exc VATOut of stockPart No.7247
Govenor
-
Govenor Weight Assembly suitable for Ferguson - Govenor Weight Assembly£33.60 Inc VAT £28.00 Exc VATIn stockPart No.6789
Timing Chains
-
£28.60 Inc VAT £23.83 Exc VATIn stockPart No.7080 -
Timing Cover Gasket suitable for Ferguson - Timing Cover Gasket£3.60 Inc VAT £3.00 Exc VATIn stockPart No.5333
Gears Camshaft
-
Camshaft Gear suitable for Ferguson - Teeth: 42.£45.60 Inc VAT £38.00 Exc VATIn stockPart No.6553
Sump Engine
-
Sump Plug suitable for Ferguson - Supplied with copper washer.£4.20 Inc VAT £3.50 Exc VATIn stockPart No.7169
Bottom Gasket Sets
-
Bottom Gasket Set suitable for Ferguson - Lower Gasket Set£11.88 Inc VAT £9.90 Exc VATIn stockPart No.53155
Air Intake
-
Metal Air Pipe suitable for Ferguson - 7101 High quality UK manufactured.
Mandrel bent , smooth corners.
Supplied self colour to match your tractor.
Uses Air Hoses 5313 & 5314.£37.62 Inc VAT £31.35 Exc VATIn stockPart No.5501 -
Air Hose - Oil Bath to Metal Pipe suitable for Ferguson - TE20 - Air Hose Oil Bath to Pipe MF - Bypass Hose
Requires Hose Clips: 2 x A-725
£10.20 Inc VAT £8.50 Exc VATIn stockPart No.5313 -
Air Hose suitable for Ferguson - Air Hose
Requires Hose Clips: 1 x A-724
£15.00 Inc VAT £12.50 Exc VATIn stockPart No.5131 -
Air Breather Hose suitable for Ferguson - Air Breather Hose
Requires Hose Clips: 2 x A-722
£5.94 Inc VAT £4.95 Exc VATIn stockPart No.6252 -
Air Intake Pipe Kit suitable for Ferguson - Kit Contains: 1 x Oil Bath To Metal Air Pipe Hose. 1 x Metal Air Pipe To Carb Hose. 1 x Metal Air Pipe. 4 x Hose Clips.£45.00 Inc VAT £37.50 Exc VATIn stockPart No.4662 -
Air Hose, UK Made suitable for Ferguson - Air Hose, Dash to Oil Bath
UK Made
Requires Hose Clips: 1 x A-724
£21.60 Inc VAT £18.00 Exc VATIn stockPart No.5131A -
Air Hose - Metal Pipe to Carburettor suitable for Ferguson - Requires Hose Clips: 2 x A-725
£10.20 Inc VAT £8.50 Exc VATIn stockPart No.5314
Air Cleaners
-
Oil Bath Air Cleaner Petrol suitable for Ferguson - Replaces AC Type with screw clamp, not clips. Exclusive To Agriline.Currently unavailablePart No.55001 -
Oil Bath Bowl suitable for Ferguson - Exclusive To Agriline.Currently unavailablePart No.55026
Oil Filters
-
Oil Filter suitable for Ferguson - Length: 151mm.
O.D: 70.8mm.
£5.76 Inc VAT £4.80 Exc VATIn stockPart No.5116 -
Oil Filter suitable for Ferguson - Length: 114.4mm.
Diameter: 69.7mm.£4.79 Inc VAT £3.99 Exc VATIn stockPart No.5119 -
Fleetguard LF594 Oil Filter suitable for Ferguson - Overall height: 155mm, OD: 68mm, Inside Ø - End 1: 33mm, Inside Ø - End 2: 33mm.£9.46 Inc VAT £7.88 Exc VATIn stockPart No.LF594
Fuel Taps
-
Ferguson TE20 Fuel Tap Gasket suitable for Ferguson - Ferguson TE20 Fuel Tap Gasket£1.79 Inc VAT £1.49 Exc VATIn stockPart No.81138 -
Fuel Tap & Bowl suitable for Ferguson - Exclusive To Agriline.Out of stockPart No.6132 -
Fuel Tap Bolt and Filter suitable for Ferguson - Fuel Tap Bolt and FilterThread OD: 15.60mm£6.60 Inc VAT £5.50 Exc VATIn stockPart No.5256 -
Fuel Tap & Bowl Clip suitable for Ferguson - Clip Assembly ONLY.£22.20 Inc VAT £18.50 Exc VATOut of stockPart No.6134
Fuel Pipes
-
Fuel Pipe- Tap to Carb (Petrol TVO) suitable for Ferguson - Fuel Pipe- Tap to Carb (Petrol TVO)£18.00 Inc VAT £15.00 Exc VATIn stockPart No.7207
Fuel Tanks
-
Ferguson TE20 Brass Fuel Tank Cap suitable for Ferguson - Ferguson TE20 Brass Fuel Tank Cap
Complete with retaining chain£23.99 Inc VAT £19.99 Exc VATIn stockPart No.5255 -
Petrol/TVO Tank suitable for Ferguson - 9642 Superb Quality. Exclusive To Agriline.Out of stockPart No.21381
Fuel Ancillaries
-
Fuel Bowl Rubber Washer suitable for Ferguson - Fuel Bowl Rubber Washer for 5410 Lift Pump38mm x 54mm x 2mm£3.60 Inc VAT £3.00 Exc VATIn stockPart No.7146 -
Engine Dipstick suitable for Ferguson - 825738M91 Exclusive To Agriline.£10.80 Inc VAT £9.00 Exc VATIn stockPart No.7639 -
Glass Bowl- Fuel Tap suitable for Ferguson - 1004498M1 1004498V1 0995260 For use with 6132£4.79 Inc VAT £3.99 Exc VATIn stockPart No.6135 -
Fuel Bowl Cork Washer Kit suitable for Ferguson - Fuel Bowl Cork Washer Kit£7.80 Inc VAT £6.50 Exc VATIn stockPart No.6241
Throttle Levers
-
Woodruff Key suitable for Ferguson - Applications:
Fordson Dexta, Super Dexta, Major, Power Major, Super Major - Throttle Lever Woodruff Key
Ferguson TEA20 & TED20- Oil Pump Drive Shaft Woodruff Key.
Massey Ferguson- 35 Petrol & 135 Petrol- Oil Pump Drive Sha... Show More£0.90 Inc VAT £0.75 Exc VATIn stockPart No.6448 -
Throttle Lever suitable for Ferguson - Chrome. Early models where lever connects to a rod with ball joints, and then to the circular disc. Up to serial number 200,000.£18.00 Inc VAT £15.00 Exc VATIn stockPart No.5630A -
Throttle Lever suitable for Ferguson - 825074M1 825072M91 Chrome. Later models where lower part connects to a flat bar, then to the circular disc from serial number 200,001.£18.00 Inc VAT £15.00 Exc VATIn stockPart No.5630 -
Throttle Lever (P3 Conversion) suitable for Ferguson - 7266 Throttle Lever suitable to TE20 Models with P3 conversions.Shaft Length: 230mmHandle Length: 195mm£18.00 Inc VAT £15.00 Exc VATIn stockPart No.75088
Carburettors
-
Carburettor suitable for Ferguson - 825448M91 24T2 Genuine Zenith.
Carburettor 24T2.£294.00 Inc VAT £245.00 Exc VATIn stockPart No.6255 -
Carburettor Float suitable for Ferguson - Carburettor Float£14.40 Inc VAT £12.00 Exc VATIn stockPart No.7251
Carburettor Repair
-
Carburettor Gaskets suitable for Ferguson - 825959M1 58532 Suitable for Marvel, Zenith 28G & 24T2 Carburettors.£1.80 Inc VAT £1.50 Exc VATIn stockPart No.75585 -
Carburettor Gaskets suitable for Ferguson - 58532 Zenith 24T2 Carburettor£2.38 Inc VAT £1.98 Exc VATIn stockPart No.74160 -
Carburettor Adjustable Needle Kit suitable for Ferguson - Genuine Zenith.
Compatible with Agriline Part No. 6255.£28.15 Inc VAT £23.46 Exc VATIn stockPart No.74739 -
Carburettor Repair Kit suitable for Ferguson - Zenith 24T2 Carburettor£23.99 Inc VAT £19.99 Exc VATIn stockPart No.7174
Gaskets Manifold
-
Manifold Gasket suitable for Ferguson - Manifold Gasket£6.00 Inc VAT £5.00 Exc VATIn stockPart No.50157
Exhaust Elbow
-
Elbow Exhaust suitable for Ferguson -Elbow ExhaustDimensions- Bolt Hole Centres: 67mm- Outlet OD: 50.40mmRequires 1 x 5003 Gasket.£21.60 Inc VAT £18.00 Exc VATIn stockPart No.4102
Gasket Exhaust Elbow
-
Gasket Elbow suitable for Ferguson - Use With 4102 & 4103 Exhaust Elbow. UK Made.£2.28 Inc VAT £1.90 Exc VATIn stockPart No.5003
Exhaust Nuts & Bolts
-
Manifold/Elbow Stud suitable for Ferguson - 3/8 UNC
Major - Exhaust Manifold to Head Stud
FE35 - Manifold to Head and Manifold to Elbow
TE20 Series - Elbow to Manifold
Case IH - Manifold to Elbow£2.16 Inc VAT £1.80 Exc VATIn stockPart No.50339 -
Manifold/Elbow Nut suitable for Ferguson - 3/8 UNC
Major - Nut For Exhaust Manifold to Head Stud
FE35 - Manifold to Head and Manifold to Elbow
TE20 Series will also suit Elbow to Manifold.£1.08 Inc VAT £0.90 Exc VATIn stockPart No.50337
Exhaust Clamp
-
Exhaust Clamp suitable for Ferguson - Exhaust Clamp£5.40 Inc VAT £4.50 Exc VATIn stockPart No.4100 -
Exhaust Clamp Horizontal suitable for Ferguson - Exhaust Clamp Horizontal£5.40 Inc VAT £4.50 Exc VATIn stockPart No.3208
Exhaust Pipe
-
Heat Shield TED20 suitable for Ferguson - Heat Shield TED20£114.00 Inc VAT £95.00 Exc VATIn stockPart No.2411
Silencer Pipe
-
Silencer suitable for Ferguson - Sand textured finish.
Use 5004 Weather Cap
£41.99 Inc VAT £34.99 Exc VATIn stockPart No.3183 -
Silencer suitable for Ferguson - For Horizontal Applications, for straight up systems (Vertical) use ref 3184.Dimensions- Overall Length: 875mm- Fitting ID: 38.5mm- Body ... Show More£26.40 Inc VAT £22.00 Exc VATIn stockPart No.3200
Exhaust Down Pipe suitable for Ferguson - Exhaust Down Pipe£17.99 Inc VAT £14.99 Exc VATIn stockPart No.3199
Silencer suitable for Ferguson -Replacement part for Masse... Show More
£35.99 Inc VAT £29.99 Exc VATIn stockPart No.3189
Silencer suitable for Ferguson - Silver.
Use 5004 Weather Cap
£23.99 Inc VAT £19.99 Exc VATIn stockPart No.3184
Silencer Kit suitable for Ferguson - Kit Contains: 1 x Horizontal Silencer. 1 x Down Swept Pipe. 1 x Gasket. 1 x Pipe to Silencer Clamp. 1 x Horizontal Silencer Bracket.£41.99 Inc VAT £34.99 Exc VATIn stockPart No.3210
Exhaust Weather Cap
-
1.5" Weather Cap suitable for Ferguson - 1.5" Weather Cap£7.80 Inc VAT £6.50 Exc VATIn stockPart No.5004