Case International MXM Series MXM140 Electrical PARTS
Agriline Products Ltd stock a range of electrical tractor spare parts from many high quality manufacturers to suit Case International MXM140 tractors. In addition to this, Agriline also stock Lucas, MAHLE, Cobo and Lucas TVS parts. This includes Switches, Wiring, Starter Motors, Dynamos, Alternators, Gauges, Sensors, Tachometers, Lights, Bulbs and much more.
Ignition Switches
-
Ignition & Heater Switch suitable for Case International - Ignition & Heater Switch£65.99 Inc VAT £54.99 Exc VATIn stockPart No.2098
Starter Motors
-
Gear Reduction Starter Motor 12V, 3.2Kw (Mahle) suitable for Case International - Teeth: 10
Tooth Pitch: 12.29mm
Flange Ø: 82.5mm
Mounting Angle: -45°
Number Of Mounting Bores: 2
Mounting Points Diameter: 105mm
Bore Ø 1: 10.5mm
Rotation Direction: Clockwise
For Flywheel Depth: 38mm
£330.00 Inc VAT £275.00 Exc VATIn stockPart No.81133 -
Starter Motor 12V, 3.2KW suitable for Case International - Case IH MXM Series.In stockPart No.50132 -
Gear Reduction Starter Motor 12V, 4.2Kw (Mahle) suitable for Case International - Total Length: 381mm
Length from Front Mounting Face to Rear: 280mm
Teeth: 10
Tooth Pitch: 15.42mm
Flange Ø: 92mm
Mounting Angle: 52°
Number Of Mounting Bores: 3
Mounting Points Diameter: 146mm
Bore Ø 1: 10.9mm
Rotati... Show More£263.99 Inc VAT £219.99 Exc VATIn stockPart No.81086 -
Gear Reduction Starter Motor 12V, 3Kw (Mahle) suitable for Case International - Teeth: 10
Tooth Pitch: 15.42mm
Flange Ø: 92mm
Number Of Mounting Bores: 3
Mounting Points Diameter: 146mm
Bore Ø 1: 10.9mm
Rotation Direction: Clockwise
For Flywheel Depth: 24mm
£298.36 Inc VAT £248.63 Exc VATIn stockPart No.81081
Alternator
-
Alternator 14V, 120 Amps (Mahle) suitable for Case International - 87652089 Mounting Angle: 60°.
Belt Pulley Ø: 67mm.
Number Of Belts: 8.
Rotation Direction: Clockwise.
Bore Ø: 8.2mm.
Mounting Bores Distance: 82mm.
Mounting Points Diameter: 86mm.
Distance From Pulley To Alternator: 32.7mm.
£286.88 Inc VAT £239.07 Exc VATIn stockPart No.97077 -
Alternator 14V, 120 Amps (Mahle) suitable for Case International - Mounting Angle: 60°
Belt Pulley Ø: 67mm
Number Of Belts: 8
Rotation Direction: Clockwise
Bore Ø: 8.2mm
Mounting Bores Distance: 81mm
Mounting Points Diameter: 86mm
Distance From Pulley To Alternator: 32.7mm
£234.00 Inc VAT £195.00 Exc VATIn stockPart No.81070
Sensors
-
Fuel Rail Pressure Sensor - 504333094 suitable for Case International - 2854542 504333094 Bosch Fuel Rail Pressure Sensor Suitable for Case and New Holland Tractors.3 Terminals.£51.00 Inc VAT £42.50 Exc VATOut of stockPart No.75664 -
Rail Pressure Sensor BOSCH - 504053982 suitable for Case International - 42567283 504053982 2831362Case IHC MXM MXU SeriesFord New Holland TSA and Industrial Ford New Holland Loader FL SeriesCurrently unavailablePart No.75915
Indicator Switches
-
Indicator and Light Switch suitable for Case International - 82015276 New Holland TM / TS SeriesCase MXM Series£118.80 Inc VAT £99.00 Exc VATIn stockPart No.75089
Number Plate Lamps
-
Number Plate Lamp suitable for Case International - 3053400R92 Number Plate Lamp£8.96 Inc VAT £7.47 Exc VATIn stockPart No.8220
Light Switches
-
Stop Lamp Switch suitable for Case International - Stop Lamp Switch£6.00 Inc VAT £5.00 Exc VATIn stockPart No.50130
Headlights
-
Front Combination Lamp LH suitable for Case International - Front Combination Lamp LH£44.45 Inc VAT £37.04 Exc VATIn stockPart No.54041 -
Front Combination Lamp RH suitable for Case International - Front Combination Lamp RH£47.99 Inc VAT £39.99 Exc VATIn stockPart No.54040
Rear Lights
-
Ford New Holland Case MXM Rear Combination Light LH/RH suitable for Case International - Later models only when used on 40 series New Holland
Bulbs Supplied. E Approved: Yes. Volts: 12. Function: 3. Fitting: RH/LH. Length: 240mm. Height: 70mm. Width: 65mm.
£38.40 Inc VAT £32.00 Exc VATIn stockPart No.54088 -
Rear Combination Light LH/RH suitable for Case International - With External Electronic Draft Control Switch - Not Included With Light, Order 54089 For Switch. Bulbs Supplied. E Approved: Yes. Volts: 12. Function: 3. Fitting: RH/LH. Length: 240mm. Height: 70mm. Width: 65mm.
Later Tractors After 1995 <... Show More£58.80 Inc VAT £49.00 Exc VATIn stockPart No.54089
Working Lights
-
Work Light - LED 82031075 suitable for Case International - 82031078 - Power: 8x5W CREE LED - Lumens: 3,200LM - Voltage: 9 - 32V - Waterproof & Dustproof: IP68 - 50,000 hours lifespan - Die-cast aluminium housing - Durable polycarbonate lens£62.40 Inc VAT £52.00 Exc VATIn stockPart No.74817
LED Lights
-
Work Light and Indicator Assembly - 279220A1 suitable for Case International - 279220A1 LED corner work light and indicator assemblyFitted with resistor to ensure seamless comparability with the tractors original flasher unit.Supplied as a LH / RH Pair.Out of stockPart No.LED-032
Beacons
-
Rotating Warning Beacon suitable for Case International - For Negative Earth Tractors
Fixed Pin Fitting.
Pin Fitting : 24mm.
Overall Height: 60mm.
Diameter: 125mm.
12V H1 Halogen Bulb.12V / 55W , 24V / 70W.
Impact Resistant Lens.
CE Approved.
Replacement Bulb - Agriline Ref: 9368<... Show More£25.98 Inc VAT £21.65 Exc VATIn stockPart No.54028
Beacon Bracket suitable for Case International - Supplied with weather rubber cap for when beacon not in place.
Anodised plating for weather resistance.
Pin Height: 100mm.
Fixing Slots: 11mm x 22mm,
Fixing Slots Centre to Centre: 80mm.
£9.35 Inc VAT £7.79 Exc VATIn stockPart No.8452
Beacon Bracket suitable for Case International - Supplied with weather rubber cap for when beacon not in place.
Anodised plating for weather resistance.
Pin Height: 95mm.
Fixing Hole : 8mm
Fixing Holes Centre to Centre: 38mm.£9.35 Inc VAT £7.79 Exc VATIn stockPart No.8450
Rotating Warning Beacon suitable for Case International - Flexible Stem.
Pin Fitting : 24mm.
Overall Height: 315mm.
Diameter: 127mm.
12V H1 Halogen Bulb.
Impact Resistant Lens.
Operating Temperature -30° to 50°.
E Approved.
Replacement Bulb - Agriline Ref: 9368Currently unavailablePart No.A-186
Beacon Bracket suitable for Case International - Supplied with weather rubber cap for when beacon not in place.
Anodised plating for weather resistance.
Pin Height: 100mm.
Fixing Slots: 11mm x 22mm,
Fixing Slots Centre to Centre: 55mm.
£8.39 Inc VAT £6.99 Exc VATIn stockPart No.8451
Beacon Bracket suitable for Case International - 87520385 82028975 Fits either LH or RH side of the Tractor£33.60 Inc VAT £28.00 Exc VATIn stockPart No.74893
PTO Switches
-
£53.99 Inc VAT £44.99 Exc VATIn stockPart No.6894
Transmission Switches
-
Transmission Pressure Switch suitable for Case International - 5115055 5157074 82031395 Thread M12 x 1.5mm.£17.98 Inc VAT £14.98 Exc VATIn stockPart No.80720
Brake Light Switches
-
£29.99 Inc VAT £24.99 Exc VATOut of stockPart No.72601
Relays
-
Micro Relay 12V - 30/20A suitable for Case International - 84543528Headlamp RelayTerminals: 5.
Show More£5.40 Inc VAT £4.50 Exc VATIn stockPart No.75362