Case International B Series B276 Electrical PARTS

Agriline Products Ltd stock a range of electrical tractor spare parts from many high quality manufacturers to suit Case International B276 tractors. In addition to this, Agriline also stock Lucas, MAHLE, Cobo and Lucas TVS parts. This includes Switches, Wiring, Starter Motors, Dynamos, Alternators, Gauges, Sensors, Tachometers, Lights, Bulbs and much more.

Wiring Looms

  1. Wiring Loom suitable for Case International -
    Wiring Loom suitable for Case International - Wiring Loom, UK Made - As Original Quality
    ( Non Cabbed Tractors )
    Doesn't include wiring for rear lights as these were optional extra
    £142.80 Inc VAT £119.00 Exc VAT
    Van In stock
    Part No.
    74697

Starter Motors

  1. Starter Motor suitable for Case International -
    Starter Motor suitable for Case International - Lucas M45 Type.
    12V.
    2.2 kW.
    LH Fit.
    Fitting: 3 Hole.
    Flange RH Opening.
    Teeth: 10.
    £118.80 Inc VAT £99.00 Exc VAT
    Van In stock
    Part No.
    8021
  2. Starter Motor suitable for Case International -  704447R94
    Starter Motor suitable for Case International - 704447R94 Early IHC Lever Type (1958 - 1964)
    Supplied With Rubber Boot Which Sits Over The Top Of The Lever.


    £178.80 Inc VAT £149.00 Exc VAT
    Van Out of stock
    Part No.
    8153

Dynamos

  1. Tractor Dynamo suitable for Case International -  3049871R91  K908882
    Tractor Dynamo suitable for Case International - 3049871R91 K908882

    These 12V dynamo are a direct replacement for the Original Lucas C40 dynamo, with a single spade on the rear and a lug on the side. 

    These dynamos have been redeveloped to be fully weather proof; the positi... Show More

    £66.00 Inc VAT £55.00 Exc VAT
    Van In stock
    Part No.
    5297

Heater Plug

  1. Glow Plug - 710348R1 suitable for Case International -  710348R1
    Glow Plug - 710348R1 suitable for Case International - 710348R1
    Glow Plug

    Dimensions
    Thread: No.18 BS Spark Plug. 18mm x 1.5 Pitch

    Note that these must be wired in series
    £15.00 Inc VAT £12.50 Exc VAT
    Van In stock
    Part No.
    5721

Solenoid

  1. Starter Solenoid suitable for Case International -
    £21.59 Inc VAT £17.99 Exc VAT
    Van In stock
    Part No.
    9029
  2. 5171
    Solenoid suitable for Case International - 12V Solenoid

    Mounting Centers: 40mm
    £11.99 Inc VAT £9.99 Exc VAT
    Van In stock
    Part No.
    5171

Gauges

  1. Water Temp Gauge suitable for Case International -
    Water Temp Gauge suitable for Case International - Water temp gauge

    Dimensions

     - Body OD: 52mm 
     - Bezel OD: 57mm 
     - Wire Length: 190cm 
     - Sender Thread OD: 15.3mm 
    &... Show More
    £18.00 Inc VAT £15.00 Exc VAT
    Van In stock
    Part No.
    5055
  2. Ampmeter suitable for Case International -
    £18.00 Inc VAT £15.00 Exc VAT
    Van In stock
    Part No.
    5056

Tachometer Cables

  1. Tachometer Cable suitable for Case International -  3070503R92  3070503R93
    £7.66 Inc VAT £6.38 Exc VAT
    Van In stock
    Part No.
    6559

Beacons

  1. Rotating Warning Beacon suitable for Case International -
    Rotating Warning Beacon suitable for Case International - For Negative Earth Tractors
    Fixed Pin Fitting.
    Pin Fitting : 24mm.
    Overall Height: 60mm.
    Diameter: 125mm.
    12V H1 Halogen Bulb.
    12V / 55W , 24V / 70W.
    Impact Resistant Lens.
    CE Approved.

    Replacement Bulb - Agriline Ref: 9368<... Show More
    £25.98 Inc VAT £21.65 Exc VAT
    Van In stock
    Part No.
    54028
  2. Beacon Bracket suitable for Case International -
    Beacon Bracket suitable for Case International - Supplied with weather rubber cap for when beacon not in place.
    Anodised plating for weather resistance.
    Pin Height: 100mm.
    Fixing Slots: 11mm x 22mm,
    Fixing Slots Centre to Centre: 80mm.
    £9.35 Inc VAT £7.79 Exc VAT
    Van In stock
    Part No.
    8452
  3. Beacon Bracket suitable for Case International -
    Beacon Bracket suitable for Case International - Supplied with weather rubber cap for when beacon not in place.
    Anodised plating for weather resistance.
    Pin Height: 95mm.
    Fixing Hole : 8mm
    Fixing Holes Centre to Centre: 38mm.
    £9.35 Inc VAT £7.79 Exc VAT
    Van In stock
    Part No.
    8450
  4. Beacon Bracket suitable for Case International -
    Beacon Bracket suitable for Case International - Supplied with weather rubber cap for when beacon not in place.
    Anodised plating for weather resistance.
    Pin Height: 100mm.
    Fixing Slots: 11mm x 22mm,
    Fixing Slots Centre to Centre: 55mm.
    £8.39 Inc VAT £6.99 Exc VAT
    Van In stock
    Part No.
    8451