Case International 75 Series 475 Engine PARTS

We stock a wide range of high quality replacement tractor engine spare parts to suit Case International 475 tractors. All parts come with an 18 months warranty. Our range includes; cylinder heads, gaskets, valves, engines, blocks, pistons, liners, piston rings, Seals, engine overhaul Kits, fuel pumps, oil pumps, crankshafts, engine bearings, oil filters, fuel filters, fuel pipes, manifolds, silencers and much more.

Cylinder Head

  1. Cylinder Head suitable for Case International -  3118175R91
    Cylinder Head suitable for Case International - 3118175R91 Perkins Engines A4.212, A4.236, A4.248
    Includes Valves.

    This head is suitable for engines with electrical sender units
    *NOTE - Cylinder head will require cleaning to remove any rust preventative prior to fitting*
    £358.80 Inc VAT £299.00 Exc VAT
    Van In stock
    Part No.
    7339

Cylinder Head Gasket

  1. 53167
    Head Gasket Set suitable for Case International - 104mm Bore.
    For use with 'Flame Ring Liners'.
    Perkins Engines A4.212, A4.236, A4.248
    £23.99 Inc VAT £19.99 Exc VAT
    Van In stock
    Part No.
    53167

Rocker Cover Gaskets

Valves Engine

Valve Kits

  1. Valve Train Kit suitable for Case International -
    Valve Train Kit suitable for Case International - Valve Train Kit - Perkins A4.212, A4.248, A4.236; Comprises: 4 x Inlet Valve, 4 x Exhaust Valve, 8 x Valve Springs, 8 x Valve Springs, 8 x Valve Seals, 16 x Collet 4 x Inlet Guide 4 x Exhaust Guides
    £69.56 Inc VAT £57.97 Exc VAT
    Van In stock
    Part No.
    7336

Valve Guides

  1. Valve Guide (Inlet) suitable for Case International -
    Valve Guide (Inlet) suitable for Case International - Perkins Engines A4.212, A4.236, A4.248, A6.354, A6.354.4, AT6.354.4, T6.354.4,A4.41
    £3.48 Inc VAT £2.90 Exc VAT
    Van In stock
    Part No.
    8186

Valve Springs

Valve Collets

Valve Ancillaries

Rocker Components

Studs Cylinder Head

Engine Kits

  1. Engine Overhaul Kit suitable for Case International -
    Engine Overhaul Kit suitable for Case International - Engine Overhaul Kit - (Finished Liner) Complete with Valve Train Kit (Cast - 3 Ring) Consists of; 1 x Crankshaft Rope Seal 1 x Rear Crank Lip Seal 4 x Conrod Bush 8 x Conrod Nut & Bolt 4 x Piston Ring Set 4 x Liner 1 x Head Gasket Set 1 x ... Show More
    £264.85 Inc VAT £220.71 Exc VAT
    Van In stock
    Part No.
    7352
  2. Engine Overhaul Kit suitable for Case International -
    Engine Overhaul Kit suitable for Case International - Engine Overhaul Kit - (Finished Liner) Less Valve Train Kit (Cast - 3 Ring) Consists of: 1 x Crankshaft Rope Seal 1 x Rear Crank Lip Seal 4 x Conrod Bush 8 x Conrod Nut & Bolt 4 x Piston Ring Set 4 x Liner 1 x Head Gasket Set 1 x Lower Gaske... Show More
    £216.00 Inc VAT £180.00 Exc VAT
    Van In stock
    Part No.
    7352A
  3. Engine Overhaul Kit suitable for Case International -
    Engine Overhaul Kit suitable for Case International - Perkins Engine A4.212 Consists Of: 4 x Conrod Bush 8 x Conrod Nut & Bolt 4 x Piston Ring Set 4 x Liner 1 x Head Gasket Set 1 x Lower Gasket Set 4 x Piston, Pin & Clips 1 x Front Crankshaft Seal 1 x Rear Crank Rope Seal
    £234.00 Inc VAT £195.00 Exc VAT
    Van In stock
    Part No.
    7351A
  4. Engine Overhaul Kit suitable for Case International -
    Engine Overhaul Kit suitable for Case International - Perkins Engine A4.212 Consists of; 4 x Conrod Bush 8 x Conrod Nut & Bolt 4 x Piston Ring Set 4 x Liner 1 x Head Gasket Set 1 x Valve Train Kit 1 x Lower Gasket Set 4 x Piston, Pin & Clips 1 x Front Crankshaft Seal 1 x Rear Crank Rope... Show More
    £280.04 Inc VAT £233.37 Exc VAT
    Van In stock
    Part No.
    7351

Oil Pumps

  1. Oil Pump suitable for Case International -
    Oil Pump suitable for Case International - Engine Mounted Oil Pump Perkins A4.212, A4.248, A4.236 Not for Tractors Fitted With Balancer Unit
    £58.80 Inc VAT £49.00 Exc VAT
    Van In stock
    Part No.
    7335

Oil Lines

  1. Oil pressure Switch suitable for Case International -  3055238R92  3129031R91  3132673R2
    Oil pressure Switch suitable for Case International - 3055238R92 3129031R91 3132673R2 Thread: 3/8" UNF.
    Operating pressure: 20-50 PSI.
    Max Pressure: 1450 PSI.

    For guidance only, outside diameter of thread 9mm (+-0.5mm)
    For 1/8 Fitting Use Ref 9063
    £12.00 Inc VAT £10.00 Exc VAT
    Van In stock
    Part No.
    7058A

Piston Engine

  1. Piston, Pin & Clips suitable for Case International -  3118170R91
    Piston, Pin & Clips suitable for Case International - 3118170R91
    Perkins A4.212 Engine.

    Plain Bowl Piston. 
    Piston Length: 116.15mm. 
    Chamber Depth: 19.81mm. 
    Chamber Diameter: 53.85mm. 
    Gudgeon Pin Diameter: 34.93mm. 
    Comp... Show More
    £23.40 Inc VAT £19.50 Exc VAT
    Van In stock
    Part No.
    7363
  2. Piston, Pin & Clips suitable for Case International -
    Piston, Pin & Clips suitable for Case International - Perkins Early A4.212 Engine fitted to CASE 475 Tractors early Models.
    Plain Bowl. 5 Ring.
    *Note* Please check all dimensions before ordering.
    Overall Height: 127.40mm.
    Compression Height: 76.60mm.
    Engine Bore: 98.48mm.
    Gudgeo... Show More
    £25.85 Inc VAT £21.54 Exc VAT
    Van In stock
    Part No.
    7303
  3. Piston, Pin & Clips suitable for Case International -
    Piston, Pin & Clips suitable for Case International - Perkins A4.212 & A4.236 Engine.

    Plain Bowl Piston.
    Piston Length: 127.90mm. 
    Chamber Depth: 19.22mm. 
    Chamber Diameter: 59.64mm. 
    Gudgeon Pin Diameter: 34.93mm. 
    Compres... Show More
    £27.60 Inc VAT £23.00 Exc VAT
    Van In stock
    Part No.
    7362

Piston Rings Engine

  1. Piston Ring Set suitable for Case International -
    Piston Ring Set suitable for Case International -
    Perkins A4.212 Engine.
    4 Rings.
    Suitable For Use With 4 Ring Piston, 7362
    £11.70 Inc VAT £9.75 Exc VAT
    Van In stock
    Part No.
    7479
  2. Piston Ring Set suitable for Case International -  3118131R91
    Piston Ring Set suitable for Case International - 3118131R91
    Perkins A4.212 Engine.
    3 Rings.
    Suitable For Use With 3 Ring Piston, 7363. 
    £10.80 Inc VAT £9.00 Exc VAT
    Van In stock
    Part No.
    7758

Liners Engine Cyl

  1. Liner Finished suitable for Case International -
    Liner Finished suitable for Case International - Liner, Perkins Engines A4.212, A4.236, AT4.236, A6.354, A6.354.4, AT6.354.4, T6.354.

    Bore diameter: 98.460mm
    Flange diameter: 106.400mm
    Overall height: 227.570mm
    Flange width : 3.810mm
    Outside diameter :103.220mm
    £22.80 Inc VAT £19.00 Exc VAT
    Van In stock
    Part No.
    7475

Engine Sump

Crankshafts

  1. Crankshaft Lip Seal suitable for Case International -  393596A1
    Crankshaft Lip Seal suitable for Case International - 393596A1 Crankshaft

    Perkins Engine 4.212, 4.236, 4.248, 4.248.2, 1000 Phaser Engine

    3 Hole Pulley

    68.82mm Nose.

    47.70mm Diameter Nose.

    Mains: 2.9995"/3.000"
    Show More
    £330.00 Inc VAT £275.00 Exc VAT
    Van In stock
    Part No.
    8492
  2. Crankshaft suitable for Case International -
    Crankshaft suitable for Case International - Crankshaft 

    Perkins 4.212 Rope Seal

    Flywheel Bolt Threads 1/2 UNF

    6 Threaded Holes and 1 Flywheel Dowl Hole

    Nose Diameter: 47.5mm

    No... Show More
    £330.00 Inc VAT £275.00 Exc VAT
    Van In stock
    Part No.
    7566
  3. Crankshaft suitable for Case International -
    Crankshaft suitable for Case International - Crankshaft

    Perkins 4.212.

    From serial number UA187117l

    Mains: 2.9995"/3.000"

    Conrods: 2.49995"/2.500"

    Stroke: 4.500"

    Lip SealShow More
    £285.46 Inc VAT £237.88 Exc VAT
    Van In stock
    Part No.
    7504

Conrod Bearings

Main Bearings

  1. Main Bearing Set suitable for Case International -  3118152R1
    Main Bearing Set suitable for Case International - 3118152R1 0.020". Perkins Engine A4.212, A4.236, A4.248, AT4.236, 1004.4 & 1004.4T
    £28.78 Inc VAT £23.98 Exc VAT
    Van In stock
    Part No.
    7757B
  2. Main Bearing Set suitable for Case International -  3118150R1
    Main Bearing Set suitable for Case International - 3118150R1 Standard. Perkins Engine A4.212, A4.236, A4.248, AT4.236, 1004.4 & 1004.4T
    £22.80 Inc VAT £19.00 Exc VAT
    Van In stock
    Part No.
    7757
  3. Main Bearing Set suitable for Case International -  3118151R1
    Main Bearing Set suitable for Case International - 3118151R1 0.010" Perkins Engine A4.212, A4.236, A4.248, AT4.236, 1004.4 & 1004.4T
    £22.80 Inc VAT £19.00 Exc VAT
    Van In stock
    Part No.
    7757A
  4. Main Bearing Set suitable for Case International -
    Main Bearing Set suitable for Case International - + 0.040". Perkins Engine A4.212, A4.236, A4.248, AT4.236, 1004.4 & 1004.4T
    £17.40 Inc VAT £14.50 Exc VAT
    Van In stock
    Part No.
    7757D

Conrods

  1. Conrod suitable for Case International -
    Conrod suitable for Case International - Perkins Engines A4.212, A4.236, A4.248, A6.354, A6.354.1, A6.354.2, A6.354.4, A6.372, A6.372.4, C6.354.2, 1006.6

    Pin size - 35mm
    £23.99 Inc VAT £19.99 Exc VAT
    Van In stock
    Part No.
    7344

Ancillaries Crank

Gears Crank

  1. Fly Wheel Ring Gear suitable for Case International -  130300020708  3118310R1
    Fly Wheel Ring Gear suitable for Case International - 130300020708 3118310R1 Fly Wheel Ring Gear, Perkins Engines A3.144, A3.152, AD3.152, AT3.152, T3.152, A4.192, A4.203, AD4.203, A4.212, A4.236, A4.248, AT4.236, G4.236, T4.236
    £34.80 Inc VAT £29.00 Exc VAT
    Van Out of stock
    Part No.
    7234

Crankshaft Gaskets

Crankshaft Seals

Timing Chains

Air Filters

Oil Filter Housings

Oil Filters

Fuel Filters

  1. Fleetguard FF167A CAV Fuel Filter suitable for Case International -
    Fleetguard FF167A CAV Fuel Filter suitable for Case International -
    Sold singularly. 

    Replaces:
    CAV 7111-296.
    Fleetguard FF167A.
    Coopers Filters AZF015.
    Donaldson Filters CR522.
    Mann Filters P917X.
    Baldwin BF825.

    Show More
    £4.37 Inc VAT £3.64 Exc VAT
    Van In stock
    Part No.
    5429

Fuel Lift Pumps

Fuel Injection Pumps

  1. Injection Pump Gasket suitable for Case International -
    Injection Pump Gasket suitable for Case International - Please note, all new Agriline Injection Pumps are supplied with their own new gasket.
    £2.10 Inc VAT £1.75 Exc VAT
    Van In stock
    Part No.
    80145

Fuel Injection Pipes

Fuel Injectors

Fuel Injector Nozzle

Fuel Tanks

Fuel Ancillaries

Stop Cables

Throttle Ancillaries

Exhaust Manifold

Exhaust Elbow

Exhaust Nuts & Bolts

  1. Manifold to Head Stud suitable for Case International -
    Manifold to Head Stud suitable for Case International - 5/16" x 1 11/16 UNF

    MF 35, 135, 140, 145, 234, 235, 240, 245, 250, Fordson Dexta And Super Dexta - Manifold Head Stud

    For All Other Models This Is The Injector Stud
    £2.10 Inc VAT £1.75 Exc VAT
    Van In stock
    Part No.
    4796

Silencer Pipe