Case International 74 Series 374 Engine PARTS

We stock a wide range of high quality replacement tractor engine spare parts to suit Case International 374 tractors. All parts come with an 18 months warranty. Our range includes; cylinder heads, gaskets, valves, engines, blocks, pistons, liners, piston rings, Seals, engine overhaul Kits, fuel pumps, oil pumps, crankshafts, engine bearings, oil filters, fuel filters, fuel pipes, manifolds, silencers and much more.

Cylinder Head

  1. Cylinder Head suitable for Case International -  38002984  3043824R1  3044489R91
    Cylinder Head suitable for Case International - 38002984 3043824R1 3044489R91 Cylinder Head.
    Includes Valves.

    *NOTE - Cylinder head will require cleaning to remove any rust preventative prior to fitting*
    £264.00 Inc VAT £220.00 Exc VAT
    Van Out of stock
    Part No.
    7474
  2. Pre-Combustion Chamber IH BD154 suitable for Case International -  3045523R1
    Pre-Combustion Chamber IH BD154 suitable for Case International - 3045523R1 Pre-Combustion Chamber IH BD154, supplied with sealing rings. 

    52MM Overall Length. 

    30.8MM OD

    34.9MM Lip OD

    3MM Lip Thickness
    £17.40 Inc VAT £14.50 Exc VAT
    Van In stock
    Part No.
    8151

Cylinder Head Gasket

Rocker Cover Gaskets

Valves Engine

  1. Inlet Valve suitable for Case International -  3040361R1
    Inlet Valve suitable for Case International - 3040361R1 Inlet Valve.

    Up to Serial Number 144/27051A.
    Head Diameter: 37.2mm.
    Show More
    £6.00 Inc VAT £5.00 Exc VAT
    Van In stock
    Part No.
    8715

Valve Kits

Valve Guides

Valve Springs

Studs Cylinder Head

Cylinder Block Ancil

  1. Core Plug Assortment- Imperial, Cup & Dish Type (52 Pcs) suitable for Case International -
    Core Plug Assortment- Imperial, Cup & Dish Type (52 Pcs) suitable for Case International - Includes:
    1. 1/4" Cup Type, Mild Steel x 6.
    1. 3/8" Cup Type, Mid Steel x 4.
    1. 1/2" Cup Type, Mild Steel x 4.
    1. 5/8" Cup Type, Stainless Steel x 6.
    1. 3/4" Cup Type, Mild Steel x 4.
    1. 3/4" Cup Type, Stainless Steel x 4.
    1. 1... Show More
    £70.92 Inc VAT £59.10 Exc VAT
    Van In stock
    Part No.
    50230

Engine Kits

  1. Engine Overhaul Kit suitable for Case International -
    Engine Overhaul Kit suitable for Case International - Consists of; 4 x Piston, Pin & Clips. 4 x Liner and Seal. 1 x Head Gasket Set. 1 x Bottom Gasket Set. 4 x Ring Set. 4 x Small End Bush (29.60 x 27.60 x 31mm) Unfinished. 1 x Rear Crankshaft Seal (3.63" x 4.38" x 0.74"). 1 x Front C... Show More
    £210.00 Inc VAT £175.00 Exc VAT
    Van In stock
    Part No.
    8069

Oil Pumps

  1. Oil Pump 1121034R91 suitable for Case International -  1121034R91  1127750R91  3064060R91
    Oil Pump 1121034R91 suitable for Case International - 1121034R91 1127750R91 3064060R91 Later 16" pump * May be used to replace early 15" pump but will require a 7" sump to be fitted as well as slight modifications to the steering
    £89.96 Inc VAT £74.97 Exc VAT
    Van In stock
    Part No.
    8048

Piston Engine

  1. Piston, Pin & Clips suitable for Case International -  3044486R2
    Piston, Pin & Clips suitable for Case International - 3044486R2 Piston Length: 99.03mm.
    Pin diameter: 28.07mm.
    Compression Height: 50.91mm.
    To Fit Bore: 88.90mm.
    No. of Rings: 5.
    £21.79 Inc VAT £18.16 Exc VAT
    Van In stock
    Part No.
    7472

Piston Rings Engine

Liners Engine Cyl

Liner Shims & ORings

Cylinder Tools

  1. Piston Ring Groove Cleaner suitable for Case International -
    Piston Ring Groove Cleaner suitable for Case International - For fast and reliable removal of Carbon & Glaze Deposits from Piston Ring Grooves. Suits Most Pistons between 51mm & 127mm Diameters. Each of our Exclusive Cleaners comes complete with 3 x 6 bladed cutters, covering most of the popular sizes !! Cutt... Show More
    £35.96 Inc VAT £29.97 Exc VAT
    Van In stock
    Part No.
    A-626
  2. Piston Ring Compressor suitable for Case International -
    Piston Ring Compressor suitable for Case International - Piston Ring Compressor 150mm Depth with Dual Compression Belts Capacities from 60mm - 150mm
    £28.21 Inc VAT £23.51 Exc VAT
    Van In stock
    Part No.
    A-625

Sump Gaskets

Crankshafts

  1. Crankshaft suitable for Case International -  3110995R91
    Crankshaft suitable for Case International - 3110995R91 Crankshaft

    Engines After 1958

    Mains: 2.1245"/2.125"

    Conrods: 1.7495"/1.750"

    Stroke: 4.000"

    Lip Seal

    Holes: 6Show More
    £186.00 Inc VAT £155.00 Exc VAT
    Van In stock
    Part No.
    8025

Conrod Bearings

Main Bearings

Conrods

  1. Conrod - 3061214R91 suitable for Case International -  704089R91  3061214R91
    Conrod - 3061214R91 suitable for Case International - 704089R91 3061214R91 Conrod including conrod bush for Case International Tractors between years (01/61 - 12/66). Direct replacement for OEM - 704089R91 and 3061214R91.

    Fits International BC-144, BD-144, and BD-154 Engines.

    For Conrod... Show More
    £42.00 Inc VAT £35.00 Exc VAT
    Van Out of stock
    Part No.
    75558

Gears Crank

Crankshaft Seals

Camshaft

Sump Engine

  1. Oil Sump suitable for Case International -  3064063R11
    Oil Sump suitable for Case International - 3064063R11 Later 7" Deep Sump *When replacing the early 6" sump some modification is required.
    £120.00 Inc VAT £100.00 Exc VAT
    Van In stock
    Part No.
    8074

Bottom Gasket Sets

Oil Filters

Fuel Filters

  1. Fleetguard FF167A CAV Fuel Filter suitable for Case International -
    Fleetguard FF167A CAV Fuel Filter suitable for Case International -
    Sold singularly. 

    Replaces:
    CAV 7111-296.
    Fleetguard FF167A.
    Coopers Filters AZF015.
    Donaldson Filters CR522.
    Mann Filters P917X.
    Baldwin BF825.

    Show More
    £4.37 Inc VAT £3.64 Exc VAT
    Van In stock
    Part No.
    5429

Fuel Lift Pumps

Fuel Injector Nozzle

Fuel Pump Repair Kit

Fuel Ancillaries

Exhaust Manifold

  1. Exhaust Manifold suitable for Case International -  3042719R11
    Exhaust Manifold suitable for Case International - 3042719R11 90 Degree Exhaust Manifold, Suitable For Tractors With Upright Exhaust Through The Bonnet.

    Exhaust Elbow Stud / Bolt Holes Are 3/8" UNC.
    £54.00 Inc VAT £45.00 Exc VAT
    Van In stock
    Part No.
    3220

Gaskets Manifold

Exhaust Elbow

Exhaust Clamp

Silencer Pipe

Exhaust Weather Cap