Case International 44 Series 444 Front Axle & Steering PARTS
Our range of steering and axle parts for Case International 444 tractors will get you heading in the right direction. Robust original quality steering joints and track rod ends are stocked along with kingpins, spindles, wheel bearings, axle seals, bushes, bearings, wheel hubs, repair kits, wheel nuts, power steering pumps, orbital units, hoses, steering boxes, seal kits, drive shafts, wheels and tyres.
Tyres
-
Tyre 7.50 - 16 (3 Rib) suitable for Case International - Front 2WD tyre. Brand: ATF. 8 Ply. Use With 2240 Rim And T-007 Inner Tube£74.40 Inc VAT £62.00 Exc VATIn stockPart No.T-003
Inner Tubes
-
Inner Tube- Front 7.50 x 16 suitable for Case International - Use with T-003 Tyre.£16.00 Inc VAT £13.33 Exc VATIn stockPart No.T-007
Wheel & Tyre Assemblies
-
Wheel Rim 5.50 x 16 suitable for Case International - 151734R91 3114166R91 459431R91 Suitable For Use With Tyre Size:- 7.50 X 16 Agriline Recommend Using Their Tyre Reference T-003 Which Is A 7.50 X 16 Tyre, With This Rim. Agriline wheels are manufactured to a high degree of accuracy on high speed and high strength roll formers, using spec... Show More£37.00 Inc VAT £30.83 Exc VATIn stockPart No.2240
Track & Drag Ends
-
Track Rod End- Front suitable for Case International - 3045309R91 3040921R91 3040921R92 Track rod end, front - Lock Nut Thread Length (A): 18mm - Taper Diameter (B - C): From 16.8mm – 18.5mm - Outer thread diameter (D): 16.6mm - Effective Length (E): 78mm - Male thread size (F): R3/8 x 19G BSP LHT Supplied with Nut, Suitable For Tractors With... Show More£19.99 Inc VAT £16.66 Exc VATIn stockPart No.8059 -
Track Rod End- Rear suitable for Case International - 3040922R92 3045309R91 Track rod end, rear. - Lock Nut Thread Length (A): 20mm - Taper Diameter (B - C): From 16.9mm – 18.8mm - Outer thread diameter (D): 16.6mm - Effective Length (E): 80mm - Male thread size (F): R3/8 x 19G BSP RHT Supplied with Nut, Suitable For Tractors With... Show More£20.99 Inc VAT £17.49 Exc VATIn stockPart No.8060 -
Track Rod End- Outer suitable for Case International - 3040919R91 3040920R92 3071097r91 Track Rod End, outer. - Lock Nut Thread Length (A): 20mm - Taper Diameter (B - C): From 14.5mm – 16mm - Outer thread diameter (D): 19mm - Effective Length (E): 85mm - Male thread size (F): 3/4" UNF x 16 RHT Supplied with Nut.£16.99 Inc VAT £14.16 Exc VATIn stockPart No.8062 -
Track Rod End- Outer suitable for Case International - 3040919R92 3071096r91 Track Rod End Outer. - Lock Nut Thread Length (A): 20mm - Taper Diameter (B - C): From 14.5mm – 16mm - Effective Length (D): 800 - Outer Diameter (E): 143mm Supplied with Nut.£46.99 Inc VAT £39.16 Exc VATIn stockPart No.8061
Axle Pivot Bush
-
International Axle Pivot Bush 3043856R2 suitable for Case International - 3043856R2 OD: 35mm. ID: 28.75mm. Length: 67.5mm.£10.08 Inc VAT £8.40 Exc VATIn stockPart No.74343
Spindles
-
£68.40 Inc VAT £57.00 Exc VATIn stockPart No.8055 -
£68.40 Inc VAT £57.00 Exc VATOut of stockPart No.8054
Spindle Repair Kits
-
£25.99 Inc VAT £21.66 Exc VATIn stockPart No.8056
Spindle Components
-
Spindle Lip Ring suitable for Case International - 48548D Spindle Lip Ring£3.47 Inc VAT £2.89 Exc VATIn stockPart No.4754 -
Felt Dust Seal suitable for Case International - 50259D 43828D 50mm x 70mm x 7mm£1.62 Inc VAT £1.35 Exc VATIn stockPart No.75534
Wheel Hubs
-
Front Wheel Hub with Studs & Nuts suitable for Case International - 3043868R11 Requires 1 x Wheel Bearing Kit - 8065£74.40 Inc VAT £62.00 Exc VATIn stockPart No.8068
Wheel Bearings
-
Front Wheel Outer Hub Bearing 392676R1 suitable for Case International - 392676R1 392675R91 392674r91 ID: 28.575mm OD: 57.150mm Width: 19.845mm£7.54 Inc VAT £6.28 Exc VATIn stockPart No.75781 -
Wheel Bearing Kit suitable for Case International - 1094017R92 3245116R91 Suitable for Front Wheel Hub with Studs & Nuts - 8068 Normal Duty, Adjustable Axle. 2 Part Seal. Bearing - I/D 34.92mm, O/D 65.09mm, Depth 18.29mm. Bearing - I/D 28.28mm, O/D 57.15mm, Depth 19.36mm. Cotter Pin - 40mm. Ring/Seal - I/D 43mm, O/D 71mm, Depth... Show More£19.00 Inc VAT £15.83 Exc VATIn stockPart No.8065
Front Wheel Studs
-
£1.26 Inc VAT £1.05 Exc VATOut of stockPart No.4119 -
Front Wheel Stud suitable for Case International - 3047573R1 1/2" x 1.5/8" UNF Grip 1/2"£2.21 Inc VAT £1.84 Exc VATIn stockPart No.6151
Hub Caps
-
£16.00 Inc VAT £13.33 Exc VATIn stockPart No.8035
Hub Components
-
Bearing- 34.92 x 65.09 x 18.29mm suitable for Case International - Bearing Inner Hub From serial number 368615 Tapered Roller Bearing - Timken Type - I/D = 34.92mm. O/D = 65.09mm. Depth = 18.29mm Bearing Outer Hub IH354,374,384,444,B275,B414£11.98 Inc VAT £9.98 Exc VATIn stockPart No.5521
Steering Box Repair
-
Steering Box Repair Kit suitable for Case International - Kit Contains: 2 x Horizontal Steering Shaft Bush. 1 x Small Steering Shaft Seal. 1 x Top Steering Shaft Bush. 2 x Steering Shaft Bearings. 4 x Large Steering Shaft Shims 4 x Small Steering Shaft Shims 1 x Woodruff Key£37.99 Inc VAT £31.66 Exc VATOut of stockPart No.8881
Steering Box Seals
-
Steering Box Felt Seal suitable for Case International - 3044452r1 1970 - 1985 Year Tractors£7.25 Inc VAT £6.04 Exc VATIn stockPart No.74328
Steering Wheels
-
Steering Wheel suitable for Case International - 385156R1 2WD Tractors. Suitable for Case C Series tractors with Hydrostatic Steering. Steering Wheel OD 460mm£54.00 Inc VAT £45.00 Exc VATOut of stockPart No.74778
Power Steering Accessories
-
Power Steering Filter - 1930908 suitable for Case International - 1909143 5154866 Power steering suitable for Fiat, Ford & New Holland Hydrostatic Element Dimensions Inner Diameter: 24mm Outer Diameter: 45mm Overall Length: 100mmCurrently unavailablePart No.4571