Case International 4240 Engine PARTS

We stock a wide range of high quality replacement tractor engine spare parts to suit Case International 4240 tractors. All parts come with an 18 months warranty. Our range includes; cylinder heads, gaskets, valves, engines, blocks, pistons, liners, piston rings, Seals, engine overhaul Kits, fuel pumps, oil pumps, crankshafts, engine bearings, oil filters, fuel filters, fuel pipes, manifolds, silencers and much more.

Cylinder Head Gasket

Head Gasket Set suitable for Case International Case Engines D206, D239, D246, D268, DT239

£33.00 Inc VAT £27.50 Exc VAT

In stock

Qty

Part No.
8516

Rocker Cover Gaskets

Rocker Cover Gasket suitable for Case International

£5.40 Inc VAT £4.50 Exc VAT

In stock

Qty

Part No.
80093

Valves Engine

Inlet Valve suitable for Case International Inlet Valve,

Single Groove Collet

9.90MM Stem OD

145.9MM Overall Length

43MM Head Diameter

£5.72 Inc VAT £4.77 Exc VAT

In stock

Qty

Part No.
80592

Exhaust Valve suitable for Case International

£6.36 Inc VAT £5.30 Exc VAT

Out of stock

Qty

Part No.
80593

Valve Guides

Valve Guide suitable for Case International Valve Guide, requires reaming to match valve stem size

16MM OD

77.4MM Long

£2.94 Inc VAT £2.45 Exc VAT

In stock

Qty

Part No.
7613

Valve Springs

Inlet/ Exhaust Valve Spring suitable for Case International

£2.76 Inc VAT £2.30 Exc VAT

In stock

Qty

Part No.
80594

Valve Ancillaries

Valve Tappet suitable for Case International

£9.48 Inc VAT £7.90 Exc VAT

In stock

Qty

Part No.
80595

Engine Kits

Engine Overhaul Kit - DT268 Engine suitable for Case International 4240,985,995 Case International Harvester Turbo Engine DT268 Consists of; 4 x Piston, Pin & Clips 4 x Ring Sets 4 x Liners 4 x Liner Seal 1 x Head Gasket Set 1 x Bottom Gasket Set 1 x Front Crank Seal 1 x Rear Crank Seal

£474.00 Inc VAT £395.00 Exc VAT

In stock

Qty

Part No.
72584

Oil Pumps

Oil Pump suitable for Case International Case Engines D206, D239, D246, D268, DT268

£162.00 Inc VAT £135.00 Exc VAT

Out of stock

Qty

Part No.
8712

Oil Lines

Oil pressure Switch suitable for Case International Thread: 3/8" UNF.
Operating pressure: 20-50 PSI.
Max Pressure: 1450 PSI.

For guidance only, outside diameter of thread 9mm (+-0.5mm)
For 1/8 Fitting Use Ref 9063

£12.00 Inc VAT £10.00 Exc VAT

In stock

Qty

Part No.
7058A

Piston Engine

Piston, Pin & Clips suitable for Case International Piston Diameter: 99.900mm.
Piston Length: 106.900mm.
Compression Height: 66.900mm.
Pin Diameter: 38mm.
To fit bore: 100mm.
Number of Rings: 3.

£48.00 Inc VAT £40.00 Exc VAT

In stock

Qty

Part No.
72577

Piston Rings Engine

Piston Ring Set suitable for Case International Piston Ring Set

£19.80 Inc VAT £16.50 Exc VAT

In stock

Qty

Part No.
72576

Liners Engine Cyl

Liner suitable for Case International Liner Finished

£28.80 Inc VAT £24.00 Exc VAT

In stock

Qty

Part No.
9577

Crankshafts

Crankshaft D268 & DT268 & Balancer gear suitable for Case International Crankshaft

Case International Harvester Engine D268, DT268 - 90 Teeth Balancer Gear

Mains: 3.1485"/3.1492"

Conrods: 2.5185"/2.5192"

Stroke: 5.500"

<... Show More

£496.36 Inc VAT £413.63 Exc VAT

In stock

Qty

Part No.
8540

Crankshaft suitable for Case International Crankshaft

D239 & D246.

Mains: 3.1485"/3.1492"

Conrods: 2.5185"/2.5192"

Stroke: 5070"

Lip Seal

Holes: 7+1&nb... Show More

£499.20 Inc VAT £416.00 Exc VAT

In stock

Qty

Part No.
8512

Conrod Bearings

Conrod Bearing Pair STD suitable for Case International

£5.68 Inc VAT £4.73 Exc VAT

In stock

Qty

Part No.
1816

Conrod Bearing Pair +0.50mm suitable for Case International

£2.72 Inc VAT £2.27 Exc VAT

In stock

Qty

Part No.
1819

Conrod Bearing Pair +0.25mm suitable for Case International

£2.72 Inc VAT £2.27 Exc VAT

In stock

Qty

Part No.
1818

Main Bearings

Main Bearings Set STD suitable for Case International

£40.80 Inc VAT £34.00 Exc VAT

In stock

Qty

Part No.
80163

Main Bearings Set +0.010" suitable for Case International

£31.20 Inc VAT £26.00 Exc VAT

Currently unavailable

Qty

Part No.
80164

Main Bearing Pair STD suitable for Case International Standard Size.

£7.20 Inc VAT £6.00 Exc VAT

In stock

Qty

Part No.
7076

Main Bearing Pair +0.010" suitable for Case International +0.010"

£5.88 Inc VAT £4.90 Exc VAT

In stock

Qty

Part No.
7076A

Main Bearing Pair +0.020" suitable for Case International +0.020".

£5.88 Inc VAT £4.90 Exc VAT

In stock

Qty

Part No.
7076B

Crankshaft Gaskets

Rear Main Housing Gasket suitable for Case International

£3.54 Inc VAT £2.95 Exc VAT

In stock

Qty

Part No.
80094

Crankshaft Seals

Front Crank Seal suitable for Case International 80 x 100 x 13mm Case Engines; D155, D179, D206, D239, D246, D310, D358, DT239, DT268, DT358, DT402

£9.00 Inc VAT £7.50 Exc VAT

In stock

Qty

Part No.
8518

Rear Crank Seal suitable for Case International 130 x 110 x 13mm

£10.50 Inc VAT £8.75 Exc VAT

In stock

Qty

Part No.
8519

Front Crankshaft Seal Kit suitable for Case International Contains: 1 x O-Ring. 1 x Distance Ring. 1 xOil Seal. 3 x Dowel Pins.

£40.02 Inc VAT £33.35 Exc VAT

In stock

Qty

Part No.
4508

Fly Wheel

Fly Wheel suitable for Case International For Clutch 300mm Diameter With 126 Teeth

£264.00 Inc VAT £220.00 Exc VAT

In stock

Qty

Part No.
72555

Fly Wheel Ring Gear suitable for Case International Gear Has 128 Teeth OD - 412 ID - 372

£46.80 Inc VAT £39.00 Exc VAT

In stock

Qty

Part No.
72515

Fly Wheel suitable for Case International For Clutch 300mm Diameter With 128 Teeth
Only suitable for use with C0245 clutch cover

£246.00 Inc VAT £205.00 Exc VAT

In stock

Qty

Part No.
72554

Fly Wheel Dowel suitable for Case International 3/8 Diameter

£1.44 Inc VAT £1.20 Exc VAT

In stock

Qty

Part No.
92433

Bottom Gasket Sets

Bottom Gasket Set suitable for Case International Case Engines D206, D239, D246, D268, DT239.

£35.40 Inc VAT £29.50 Exc VAT

In stock

Qty

Part No.
8517

Air Filters

Air Filter- Outer suitable for Case International Air Filter - Outer OD: 6 3/32" / 154.8mm ID: 3/4" / 19.1mm & 3 15/32" / 88.1mm Length: 11 1/2" / 292.1mm

£23.40 Inc VAT £19.50 Exc VAT

In stock

Qty

Part No.
10115

Air Filter- Inner suitable for Case International OD: 3 3/8" / 85.7mm Flange 4 5/32" / 105.6mm ID: 11/16" / 17.5mm & 2 29/32" / 73.8mm Length:10 3/32 / 256.4mm

£21.00 Inc VAT £17.50 Exc VAT

In stock

Qty

Part No.
10116

Outer Air Filter suitable for Case International Outer Air Filter

£35.20 Inc VAT £29.33 Exc VAT

In stock

Qty

Part No.
AF1861K

Oil Filters

Oil Filter suitable for Case International Height - 177mm
OD - 95mm
Thread - 1" x 12 UN
Anti Drainback Valve
ByPass Valve 8 PSI

£8.40 Inc VAT £7.00 Exc VAT

Currently unavailable

Part No.
10128

Oil Filter suitable for Case International Overall height: 174mm, OD: 94mm, Thread size: 1 - 12 UNF-2B UNF-2B,

£12.26 Inc VAT £10.22 Exc VAT

In stock

Qty

Part No.
LF3331

Oil Filter suitable for Case International Overall height: 175mm, OD: 93mm, Thread size: 1 - 12 UNF-2B UNF-2B,

£13.42 Inc VAT £11.18 Exc VAT

In stock

Qty

Part No.
LF3382

Oil Filter suitable for Case International Oil Filter

£9.42 Inc VAT £7.85 Exc VAT

In stock

Qty

Part No.
10190

Fuel Filters

Dual Filter Assembly suitable for Case International Dual Filter Assembly

£30.00 Inc VAT £25.00 Exc VAT

In stock

Qty

Part No.
7219

Fuel Filter suitable for Case International Spin On.

£10.20 Inc VAT £8.50 Exc VAT

In stock

Qty

Part No.
50347

Fuel Filter suitable for Case International Fuel Filter

£14.59 Inc VAT £12.16 Exc VAT

In stock

Qty

Part No.
FF5171

Filter Kits

Filter Service Kit suitable for Case International 4230,4240,995XL Contains; Oil Filter Fuel Filter Air Filter (Ounter) Air Filter (Inner)

£43.80 Inc VAT £36.50 Exc VAT

In stock

Qty

Part No.
FSK519

Fuel Lift Pumps

Fuel Primer Pump suitable for Case International Sucks In at Long Port

£28.80 Inc VAT £24.00 Exc VAT

In stock

Qty

Part No.
55014

Fuel Injector Nozzle

Injector Nozzle suitable for Case International Injector Nozzle

£17.99 Inc VAT £14.99 Exc VAT

In stock

Qty

Part No.
80156

Injector Sleeve suitable for Case International Non Turbo Injector Sleeve, 11mm Hole For Nozzle

£11.40 Inc VAT £9.50 Exc VAT

In stock

Qty

Part No.
74214

Fuel Tanks

Fuel Tank Cap suitable for Case International
Suitable For Tractors with XL cabs

ID: 40mm.
OD: 60mm.

£23.40 Inc VAT £19.50 Exc VAT

In stock

Qty

Part No.
74658

Fuel Ancillaries

Fuel Sender Unit suitable for Case International Fuel Sender Unit

£15.96 Inc VAT £13.30 Exc VAT

In stock

Qty

Part No.
8141

Lockable Fuel Cap suitable for Case International UK Made. Case/IH. 3200 Series - From Serial Number JJE0925810.

£15.52 Inc VAT £12.93 Exc VAT

In stock

Qty

Part No.
50443

Fuel Cap suitable for Case International UK Made. Male Thread

£11.70 Inc VAT £9.75 Exc VAT

In stock

Qty

Part No.
50442

Fuel Tank Tap suitable for Case International 1/2" - 20 x 3/8" - 18 NPTF

£94.68 Inc VAT £78.90 Exc VAT

In stock

Qty

Part No.
74304

Stop Cables

Stop Cable suitable for Case International For Models with VE Injection pump 1370mm.
XL Cab tractors

£21.00 Inc VAT £17.50 Exc VAT

In stock

Qty

Part No.
4077

Hand Throttle Cables

Throttle Cable suitable for Case International Models With XL or LP Cab. Length: 1450mm.

£15.00 Inc VAT £12.50 Exc VAT

In stock

Qty

Part No.
1776

Filler Caps Oil

Oil Filler Cap suitable for Case International Oil Filler Cap

£28.80 Inc VAT £24.00 Exc VAT

In stock

Qty

Part No.
74784

Gaskets Manifold

Exhaust Manifold Gasket suitable for Case International

£1.56 Inc VAT £1.30 Exc VAT

In stock

Qty

Part No.
8750

Exhaust Clamp

Silencer Clamp suitable for Case International I.D: 67mm.

£3.48 Inc VAT £2.90 Exc VAT

In stock

Qty

Part No.
A-444