Case International 840 Engine PARTS
We stock a wide range of high quality replacement tractor engine spare parts to suit Case International 840 tractors. All parts come with an 18 months warranty. Our range includes; cylinder heads, gaskets, valves, engines, blocks, pistons, liners, piston rings, Seals, engine overhaul Kits, fuel pumps, oil pumps, crankshafts, engine bearings, oil filters, fuel filters, fuel pipes, manifolds, silencers and much more.
Cylinder Head Gasket
-
Head Gasket Set suitable for Case International Case Engines D206, D239, D246, D268, DT239£33.00 Inc VAT £27.50 Exc VATIn stockPart No.8516
Rocker Cover Gaskets
-
£5.40 Inc VAT £4.50 Exc VATIn stockPart No.80093
Valves Engine
-
Inlet Valve suitable for Case International Inlet Valve,Single Groove Collet9.90MM Stem OD145.9MM Overall Length43MM Head Diameter£5.72 Inc VAT £4.77 Exc VATIn stockPart No.80592 -
£6.36 Inc VAT £5.30 Exc VATIn stockPart No.80593
Valve Guides
-
Valve Guide suitable for Case International Valve Guide, requires reaming to match valve stem size16MM OD77.4MM Long£2.94 Inc VAT £2.45 Exc VATIn stockPart No.7613
Valve Springs
-
£2.76 Inc VAT £2.30 Exc VATIn stockPart No.80594
Valve Ancillaries
-
£9.48 Inc VAT £7.90 Exc VATIn stockPart No.80595
Oil Pumps
-
Oil Pump suitable for Case International Case Engines D206, D239, D246, D268, DT268£168.00 Inc VAT £140.00 Exc VATIn stockPart No.8712
Oil Lines
-
Oil pressure Switch suitable for Case International Thread: 3/8" UNF.
Operating pressure: 20-50 PSI.
Max Pressure: 1450 PSI.
For guidance only, outside diameter of thread 9mm (+-0.5mm)
For 1/8 Fitting Use Ref 9063
£12.00 Inc VAT £10.00 Exc VATIn stockPart No.7058A
Piston Rings Engine
-
Piston Ring Set suitable for Case International Use With Piston 8504.
Has chamfered edges on No.1 Ring, as per original piston.£18.00 Inc VAT £15.00 Exc VATIn stockPart No.8505
Liners Engine Cyl
-
£26.40 Inc VAT £22.00 Exc VATIn stockPart No.8506
Liner Shims & ORings
-
Liner Seal Gold Stripes suitable for Case International Case Engines; D155, D179, D206, D239, D246, D310 D358. 4.75mm Thick 109 ID mm£3.60 Inc VAT £3.00 Exc VATIn stockPart No.8508
Crankshafts
-
Crankshaft suitable for Case International CrankshaftD239 & D246.Mains: 3.1485"/3.1492"Conrods: 2.5185"/2.5192"Stroke: 5070"Lip SealHoles: 7+1&nb... Show More£499.20 Inc VAT £416.00 Exc VATIn stockPart No.8512
Conrod Bearings
-
Conrod Bearing Pair STD suitable for Case International 1 Pair. Lug On The Left. Standard Size 30mm£15.00 Inc VAT £12.50 Exc VATIn stockPart No.8829 -
Conrod Bearing Set + 0.010" suitable for Case International + 0.010" for 4 Cyl. Applications,£26.40 Inc VAT £22.00 Exc VATIn stockPart No.7088A -
Conrod Bearing Set STD suitable for Case International Standard Size. Suitable for 4 Cyl. Applications,£21.59 Inc VAT £17.99 Exc VATIn stockPart No.7088 -
£5.99 Inc VAT £4.99 Exc VATIn stockPart No.1817 -
Conrod Bearing Set + 0.020" suitable for Case International + 0.020" for 4 Cyl Applications,£4.03 Inc VAT £3.36 Exc VATIn stockPart No.7088B
Main Bearings
-
£40.80 Inc VAT £34.00 Exc VATIn stockPart No.80163 -
£31.20 Inc VAT £26.00 Exc VATCurrently unavailablePart No.80164 -
Main Bearing Pair STD suitable for Case International Standard Size.£7.20 Inc VAT £6.00 Exc VATIn stockPart No.7076 -
£5.88 Inc VAT £4.90 Exc VATIn stockPart No.7076A -
£5.88 Inc VAT £4.90 Exc VATIn stockPart No.7076B
Conrod Bushes
-
Small End Bush- 40 x 35.25 x 33.60mm suitable for Case International Case IH Engines; D155, D179, D206, D239, D246, D310, D358£4.50 Inc VAT £3.75 Exc VATIn stockPart No.8513
Crankshaft Gaskets
-
£3.54 Inc VAT £2.95 Exc VATIn stockPart No.80094
Crankshaft Seals
-
Front Crank Seal suitable for Case International 80 x 100 x 13mm Case Engines; D155, D179, D206, D239, D246, D310, D358, DT239, DT268, DT358, DT402£9.00 Inc VAT £7.50 Exc VATIn stockPart No.8518 -
Rear Crank Seal suitable for Case International 130 x 110 x 13mm£10.50 Inc VAT £8.75 Exc VATIn stockPart No.8519 -
Front Crankshaft Seal Kit suitable for Case International Contains: 1 x O-Ring. 1 x Distance Ring. 1 xOil Seal. 3 x Dowel Pins.£40.02 Inc VAT £33.35 Exc VATIn stockPart No.4508
Bottom Gasket Sets
-
Bottom Gasket Set suitable for Case International Case Engines D206, D239, D246, D268, DT239.£35.40 Inc VAT £29.50 Exc VATIn stockPart No.8517
Air Filters
-
Air Filter- Outer suitable for Case International Length: 11 3/8" 288.9mm. ID: 21/32" / 16.7mm. OD: 5 1/4" / 133.4mm. 3210 - Less air conditioning. 3220 - Less air conditioning. 685 - Less air conditioning. 695 - Less air conditioning. 785 - Less air conditioning. 795 - Less air conditioning... Show More£34.80 Inc VAT £29.00 Exc VATIn stockPart No.10111 -
Air Filter- Outer suitable for Case International O.D: 125mm
Length: 287mm.£16.80 Inc VAT £14.00 Exc VATCurrently unavailablePart No.10118 -
Air Filter- Inner suitable for Case International Air Filter - Inner. 3210 - Less air conditioning. 3220 - Less air conditioning. 685 - Less air conditioning. 695 - Less air conditioning. 785 - Less air conditioning. 795 - Less air conditioning. 885 - Less air conditioning. 895 - Less air condit... Show More£13.20 Inc VAT £11.00 Exc VATIn stockPart No.10112 -
Air Filter- Inner suitable for Case International O.D: 62.8mm.
I.D: 53.5mm.
Length: 283mm.£30.26 Inc VAT £25.22 Exc VATIn stockPart No.10119 -
Inner Air Filter suitable for Case International Inner Air Filter£36.61 Inc VAT £30.51 Exc VATIn stockPart No.AF4521
Oil Filters
-
Oil Filter suitable for Case International Oil Filter£11.40 Inc VAT £9.50 Exc VATIn stockPart No.10122 -
Oil Filter suitable for Case International 740,840 Overall height: 121mm, OD: 102mm, Inside Ø - End 1: 20mm, Inside Ø - End 2: 20mm£15.55 Inc VAT £12.96 Exc VATIn stockPart No.LF512 -
Oil Filter suitable for Case International Overall height: 106mm, OD: 93mm, Thread size: 3/4 - 16 UNF-2B UNF-2B,£9.01 Inc VAT £7.51 Exc VATIn stockPart No.LF742
Filter Kits
-
Filter Service Kit suitable for Case International 840 Contains; Oil Filter Fuel Filter Air Filter (Ounter) Air Filter (Inner)£48.86 Inc VAT £40.72 Exc VATIn stockPart No.FSK511
Fuel Lift Pumps
-
Fuel Primer Pump suitable for Case International Sucks In at Long Port£28.80 Inc VAT £24.00 Exc VATIn stockPart No.55014
Fuel Injectors
-
Injector Sleeve suitable for Case International Injector Sleeve£21.00 Inc VAT £17.50 Exc VATIn stockPart No.80505
Fuel Injector Nozzle
-
Injector Nozzle suitable for Case International Injector Nozzle£17.99 Inc VAT £14.99 Exc VATIn stockPart No.80156
Fuel Ancillaries
-
Fuel Cap suitable for Case International O.D. Approx 73mm.
£8.99 Inc VAT £7.49 Exc VATIn stockPart No.80972
Exhaust Manifold
-
£96.00 Inc VAT £80.00 Exc VATIn stockPart No.8755
Gaskets Manifold
-
Exhaust Manifold Gasket suitable for Case International Exhaust Manifold Gasket£1.56 Inc VAT £1.30 Exc VATIn stockPart No.8750
Silencer Pipe
-
Silencer suitable for Case International Fitting Ø: 62mm.
Overall Length: 1330mm.
Silencer Ø: 95mm.
Silencer Length: 660mm.
Finish: Black Heat Resistant Paint.
£77.99 Inc VAT £64.99 Exc VATIn stockPart No.81051