Case International 3200 Series 3230 Clutch PARTS
Here you will find our extensive range of clutch components for Case International 3230 tractors. For most models of tractor, we provide our own brand of tractor clutch kits, clutch plates, PTO clutch packs and plates. We only supply the best quality release and pilot bearings. For modern tractors you will find clutch cables, clutch slave cylinders and clutch master cylinders. We also carry a wide range of LUK tractor clutch kits.
Clutch Kit
-
Clutch Kit (With Bearings) suitable for Case International - 128005511 - Single Cover. 6 Bolt. 280mm. With Fixed PTO Plate 1" 5/8 and 10 Splines.
328017541 - Transmission Plate. 280mm. 10 Spline. Spline O/D 1"1/8. Torsion Sprung with compensating springs. No Axial cushion. 6 Pair of Pads on a plate with 8 sp... Show More£372.00 Inc VAT £310.00 Exc VATOut of stockPart No.628103307 -
Clutch Kit 12" Rockford suitable for Case International -
Clutch Kit Contains:
1 x Clutch Cover 12" / 305mm 10 Splines
1 x Clutch Main Drive Plate 12" / 305mm 6 Paddle 10 Spline 1 1/8"
1 x Clutch Release Bearing 102mm x 60mm x 20.5mm
1 x Pilot Bearing 47mm x 20mm x 14mmShow More £288.00 Inc VAT £240.00 Exc VATIn stockPart No.C0296 -
Clutch Kit - Case IH Laycock suitable for Case International -
Clutch Kit Contains:
1 x Clutch Cover Split Torque 11" / 280mm - 10 Spline
1 x Clutch Main Drive Plate - 11" / 280mm - 1 1/8" 10 Spline 6 Pad
1 x Clutch Release Bearing - 102mm x 60mm x 20.5mm
1 x Pilot Bearing - 47mm x... Show More£178.80 Inc VAT £149.00 Exc VATOut of stockPart No.C0111
Clutch Cover
-
£107.99 Inc VAT £89.99 Exc VATOut of stockPart No.C0253 -
Clutch Cover - Rockford suitable for Case International - 85025C1 85025C2 Single Clutch 12".£162.00 Inc VAT £135.00 Exc VATIn stockPart No.C0245
Main Drive Plate
-
Clutch Main Plate suitable for Case International - 85026C2 85026C3 12" x 1 1/8".
10 Splines.
6 Paddles.£96.95 Inc VAT £80.79 Exc VATIn stockPart No.C0237 -
Clutch Main Plate suitable for Case International - 293248A1 3121507R91 3121507R94 280mm /11" 1"1/8 10 splines 6 pads Torsion damper plate.£89.99 Inc VAT £74.99 Exc VATIn stockPart No.C0236 -
Main Plate suitable for Case International - 85026C3 385 LUK 12" 1"1/8 Spline O/d 10 Spline 6 Paddle£199.08 Inc VAT £165.90 Exc VAT2-3 working daysPart No.331015411
Release Bearing
-
Clutch Release Bearing suitable for Case International - 85104C91 85104C92 OD - 102mm
ID - 60mm
DEPTH - 20.5mm
£34.80 Inc VAT £29.00 Exc VATIn stockPart No.C0118 -
Clutch Wear Ring - 1970876C3 suitable for Case International - 1970876C3 Plastic Clutch Release Bearing Washer Which Fits To The End Of The Clutch Release Bearing On Tractors That Have A Constant Running Bearing.
Size: 12".
£6.76 Inc VAT £5.63 Exc VATIn stockPart No.81280
Clutch Pilot Bearing
-
£4.79 Inc VAT £3.99 Exc VATIn stockPart No.C0116
Clutch Setting Tools
-
Clutch Alignment Tool suitable for Case International - Clutch Alignment Tool suitable for Case IH & McCormick.Pilot Diameter Inch: 0.75.Pilot Diameter Metric: 19.05.Spline Count: (10) (10).Spline Inch: (1 1/... Show More£22.20 Inc VAT £18.50 Exc VATIn stockPart No.77154Master Cylinder
-
Clutch Master Cylinder suitable for Case International - 3129807R92 3129807R91 86011371Clutch Master Cylinder.Required Fluid:- Mineral Oil. (This Can Be Found In The Related Items Section Oppos... Show More£59.20 Inc VAT £49.33 Exc VATIn stockPart No.74970
Slave Cylinder
-
Clutch Slave Cylinder - 3129800R92 suitable for Case International - 3129800R92 The Brake system must be fully flushed with new clean fluid to remove any residual contaminants that may be left in the system.
Warranty shall not be accepted for damaged seals due to contamination.£118.80 Inc VAT £99.00 Exc VATIn stockPart No.81179
Cylinder Repair Kits
-
Seal Kit- Clutch Master Cylinder suitable for Case International - 80327C91 86014709 N7602 The Brake system must be fully flushed with new clean fluid to remove any residual contaminants that may be left in the system.
Warranty shall not be accepted for damaged seals due to contamination.£22.79 Inc VAT £18.99 Exc VATIn stockPart No.80081 -
Seal Kit- Slave Cylinder suitable for Case International - 80318C91 The Brake system must be fully flushed with new clean fluid to remove any residual contaminants that may be left in the system.
Warranty shall not be accepted for damaged seals due to contamination.£22.79 Inc VAT £18.99 Exc VATIn stockPart No.80036
-