Cylinder Block Ancil

Plug Kit Plug Kit

£19.99 Inc VAT £16.66 Exc VAT

In stock

Qty

Part No.

72285

Core Plug 1.1/2" (38.1MM) Dish Type 135 240 Core Plug 1.1/2" (38.1MM) Dish Type

£2.21 Inc VAT £1.84 Exc VAT

In stock

Qty

Part No.

7148

Gasket Combustion Chamber Cap 3 Per Engine.

£3.16 Inc VAT £2.63 Exc VAT

In stock

Qty

Part No.

7164

Short Motor Parts Short Motor Parts

£222.00 Inc VAT £185.00 Exc VAT

Out of stock

Qty

Part No.

92401

Crank Shaft Key Crankshaft Key - Overall Length: 66.7mm - Overall Width: 6.2mm - Overall Height: 7.95mm

£4.42 Inc VAT £3.68 Exc VAT

In stock

Qty

Part No.

92069

Core Plug 7/8" (22.23mm), Cup Type Core Plug 7/8" (22.23mm), Cup Type

£2.21 Inc VAT £1.84 Exc VAT

In stock

Qty

Part No.

87240

6 Volt Shim 6 Volt shim to fit between the starter motor and the bell housing as per original.

£5.54 Inc VAT £4.62 Exc VAT

In stock

Qty

Part No.

92095

Union Nut for Oil Suction / Delivery Pipe - 33532121 Nut for Oil Suction/Delivery Pipe. Thread OD: 21.80mm Nut ID: 16mm

£2.02 Inc VAT £1.68 Exc VAT

In stock

Qty

Part No.

92413

BSD Short Motor Kit Without Pulley BSD Short Motor Kit Without Pulley

£139.20 Inc VAT £116.00 Exc VAT

In stock

Qty

Part No.

72218A

BSD Engine Hub BSD Engine Hub

£31.00 Inc VAT £25.83 Exc VAT

In stock

Qty

Part No.

72474

Core Plug 1.1/2" (38.1mm), Cup Type Core Plug. Diameter:- 1.1/2" (38.1mm), Cup Type. Leyland & Marshall Tractors:- This Core Plug Is Used At The Rear Of The Engine Block On 3.4TD / 3.8TD / 4/98 & 6/98 Engines.

£2.21 Inc VAT £1.84 Exc VAT

Out of stock

Qty

Part No.

7309

Core Plug 1.5/8" (41.27mm), Cup Type Core Plug 1.5/8" (41.27mm), Cup Type

£5.04 Inc VAT £4.20 Exc VAT

In stock

Qty

Part No.

7311

Core Plug 1.3/4" (44.45mm), Cup Type Core Plug 1.3/4" (44.45mm), Cup Type

£6.11 Inc VAT £5.09 Exc VAT

In stock

Qty

Part No.

9070

Combustion Chamber Cap 3 Per Engine.

£22.99 Inc VAT £19.16 Exc VAT

In stock

Qty

Part No.

7189

Cylinder Head Back Plate Cylinder Head Back Plate Use Gasket 7200

£19.00 Inc VAT £15.83 Exc VAT

In stock

Qty

Part No.

7188

Glow Plug (Cyl Head Fitting) FE35 835 23C 829162M1 Heater Plug To Fit Cyl Head. - Overall Length: 108mm - Thread OD: 13.8mm - Supplied in singles Please note plugs need to be wired in series as they are designed to run at 3.3V - see diagram attached. Secondly, these heater plugs are designed to require two... Show More

£16.00 Inc VAT £13.33 Exc VAT

In stock

Qty

Part No.

7317

Core Plug 1.1/4" (31.75mm), Cup Type Core Plug 1.1/4" (31.75mm), Cup Type

£4.20 Inc VAT £3.50 Exc VAT

In stock

Qty

Part No.

7345

Circlip 5/8” (Pack of 10) Circlip 5/8” (Pack of 10)

£3.60 Inc VAT £3.00 Exc VAT

In stock

Qty

Part No.

7385

Core Plug 1.1/4" (31.75mm), Dish Type Core Plug, Dish Type. Diameter:- 1.1/4" (31.75MM) Case International Tractors:- This Core Plug Is Used At The Rear Of The Cylinder Head On BD144 / BD154 Diesel Engines.

£4.58 Inc VAT £3.82 Exc VAT

In stock

Qty

Part No.

50131

Core Plug 1.3/4" (44.45mm), Cup Type Core Plug 1.3/4" (44.45mm), Cup Type

£2.21 Inc VAT £1.84 Exc VAT

In stock

Qty

Part No.

8724

Core Plug 1.3/8" (35.36mm), Cup Type Core Plug 1.3/8" (35.36mm), Cup Type

£2.21 Inc VAT £1.84 Exc VAT

In stock

Qty

Part No.

50227

Core Plug Assortment- Imperial, Cup Type (60 Pcs) Includes: 7/8" x 12. 1. 1/4"x 12. 1. 5/16" x 8. 1. 1/2" x 8. 1. 5/8" x 8. 1. 3/4" x 4. 48mm (equiv. to 1. 7/8") x 4. 2 " x 4.

£58.99 Inc VAT £49.16 Exc VAT

In stock

Qty

Part No.

A-738

Core Plug Assortment- Metric, Cup Type (60 Pcs) Includes: 18mm x 5. 22mm x 5. 24mm x 5. 26mm x 5. 28mm x 5. 30mm x 5. 32mm x 10. 34mm x 10. 36mm x 5. 48mm x 5.

£55.00 Inc VAT £45.83 Exc VAT

In stock

Qty

Part No.

A-737

Core Plug 11/16" (17.46mm), Cup Type Core Plug 11/16" (17.46mm), Cup Type

£2.21 Inc VAT £1.84 Exc VAT

In stock

Qty

Part No.

73090

Core Plug 1.1/2" (38.1mm), Dish Type Core Plug Diameter:- 1.1/2" (38.1mm), Dish Type. Nuffield Tractors:- This Core Plug Is Used At The Rear Of The Engine Block On BMC 2.6 / 2.8T / 2.8TD / 3.4 / 3.8T / 3.8TA & 3.8TD Engines.

£2.99 Inc VAT £2.49 Exc VAT

In stock

Qty

Part No.

7309D

Core Plug Assortment- Imperial, Cup & Dish Type (52 Pcs) Includes: 1. 1/4" Cup Type, Mild Steel x 6. 1. 3/8" Cup Type, Mid Steel x 4. 1. 1/2" Cup Type, Mild Steel x 4. 1. 5/8" Cup Type, Stainless Steel x 6. 1. 3/4" Cup Type, Mild Steel x 4. 1. 3/4" Cup Type, Stainless Steel x 4. 1. 1/4" Dish Type, Stainless Stee... Show More

£73.20 Inc VAT £61.00 Exc VAT

In stock

Qty

Part No.

50230

Core Plug 1.1/2" (38.1mm), Cup Type Core Plug 1.1/2" (38.1mm), Cup Type

£2.21 Inc VAT £1.84 Exc VAT

In stock

Qty

Part No.

50226

Core Plug 1" (25.4mm), Dish Type Core Plug 1" (25.4mm), Dish Type

£3.97 Inc VAT £3.31 Exc VAT

In stock

Qty

Part No.

80194

Engine Block Core Plug Kit Engine Block Core Plug Kit

£5.52 Inc VAT £4.60 Exc VAT

In stock

Qty

Part No.

80210

Engine Block & Cylinder Head Core Plug Kit Engine Block & Cylinder Head Core Plug Kit

£8.82 Inc VAT £7.35 Exc VAT

In stock

Qty

Part No.

80211

Engine Block & Cylinder Head Core Plug Kit Engine Block & Cylinder Head Core Plug Kit

£16.00 Inc VAT £13.33 Exc VAT

In stock

Qty

Part No.

80212

Engine Block Core Plug Kit Dexta Super Dexta Engine Block Core Plug Kit.

£16.00 Inc VAT £13.33 Exc VAT

In stock

Qty

Part No.

80209

Cylinder Head Stud Nut UK Made. 7/16" UNF 20 TPI 14 Required

£2.27 Inc VAT £1.89 Exc VAT

In stock

Qty

Part No.

7623

Plug Plug 3/8UNF

£2.44 Inc VAT £2.03 Exc VAT

In stock

Qty

Part No.

92518

Core Plug, 2" Dish Type 2" Dish Type Core Plug

£2.21 Inc VAT £1.84 Exc VAT

In stock

Qty

Part No.

75327

1 3/8" Dish Type Core Plug 1 3/8" Dish Type Core Plug (Approx. 35mm). UK Made. Used across many applications, but suited to TEF models where core plugs are inline by starter motor side, rather than in a triangle pattern.

£2.52 Inc VAT £2.10 Exc VAT

In stock

Qty

Part No.

75553

Oil Filler Neck - Lockable Includes 2 keys and a gasket, for Perkins A3.152 and AD3.152 engines. This design is improved from the original as this filler neck has a lockable cap. Ideal for tractors which aren't locked away as this will stop anyone from potentially contaminating the... Show More

Currently unavailable

Part No.

75555

Oil Filler Neck Oil Filter Neck. For Perkins A3.152 and AD3.152 engines. To replace the old filler neck, simply remove the original filler neck fixing bolts with an 1/2" spanner, replace the gasket with the new one, then fit and tighten down the new filler neck with the s... Show More

£11.34 Inc VAT £9.45 Exc VAT

Out of stock

Qty

Part No.

76186

Core Plug (17.50mm) Cup Type Core Plug (17.50mm) Cup Type

£2.21 Inc VAT £1.84 Exc VAT

In stock

Qty

Part No.

77400

Camshaft core plug - 98412737 Camshaft core plug The Camshaft Core Plug is a precision-engineered component designed to seal the camshaft bore and prevent oil leaks within the engine. It plays a vital role in maintaining proper lubrication and protecting internal engine components from... Show More

£17.99 Inc VAT £14.99 Exc VAT

Out of stock

Qty

Part No.

77892

Cylinder Block Ancil

Independent Customer Reviews

Agriline

Customers

Sales & Support

Safe Shopping